Specifications

Composer Pro Getting Started
Copyright © 2010 Control4. All Rights Reserved.
Saved: 6/28/2010 11:32:00 AM 200-00168_Composer Pro
Getting Started
Page 71 of 132
Properties Pane -
Project Properties
Category Boxes or Buttons
Project Name—Lets you enter/edit
the name of the project.
N/A
Location—Lets you look up a
location’s latitude and longitude based
on city, state, country, etc.
Latitude/Longitude—Lets the
system calculate from the entered
zip code, the local latitude and
longitude coordinate information.
Knowing location information lets
the system calculate local sunrise
and sunset times. This is useful for
programming lights to turn on at
dusk and off at dawn. Using a zip
code to find the coordinates only
provides a close estimate of latitude
and longitude. If you want to enter
exact coordinates, the fields can be
edited. Also used for outside
temperature on the Touch Screens.
Lookup Button—Lets you
enter/edit the zip code which
identifies to the system the local
cable, satellite, and broadcast
channel programming. It also
automatically provides latitude and
longitude coordinate location.
Date and Time—Lets you set a date,
time, and time zone for the Control4
system. By changing the time here
and refreshing Navigators (File >
Refresh Navigators), you reset the
time on the entire system. However,
Control4 systems with access to the
Internet automatically synchronize the
system clock using Network Time
Protocol (NTP).
Time zone—Lets you set the
appropriate time zone by clicking
Edit. Changing the time zone
causes the Controller to reboot.
Project Settings Control—Lets you
set a device in Composer that does
not allow the setting to be overridden
at the device.
Push Settings from Project—
Check the box for devices to
receive settings from the Composer
project only. New settings in the
Composer project override any
settings at the device.
System Security—If set, all
Navigators (Release 2.0 and later)
must connect through a secure
connection.
Secure Connections Only
(SSL)—Check this box if you want
all Navigators in this system to go
through a secure connection. Click
Change Password to change this
password. Note 1: If the Navigator
is not aware of the password
restriction, a password prompt
appears when the user tries to use
the Touch Screen or On-Screen