Specifications

Composer Pro Getting Started

Saved: 6/28/2010 11:32:00 AM 200-00168_Composer Pro

Getting Started

Page 57 of 132

x Green—Indicates that an address is identified and the device is online. For example, a

Dimmer is identified and communicating to the Control4 system.

x Yellow—Indicates that an address is identified and the device is offline. For example, if the

System Remote Control goes to sleep, the status turns Yellow. This indicates that the

System Remote Control has been identified, but it is offline. Activate the device so it can

communicate to the Control4 system.

x Red—Indicates that a device is not identified. In this case, go to the Connections view >

Network tab and identify the device to the system.

The Network Tools tabs are shown below.

3.2.1.5.5.1 IP Network Tab

This shows the IP devices on the network, network addresses, and status.