Specifications

Composer Pro Getting Started

Saved: 6/28/2010 11:32:00 AM 200-00168_Composer Pro

Getting Started

Page 56 of 132

x System Diagnostics—Assists you in gathering system information to help you determine if

any issues encountered are configuration problems, performance issues, or potential defects.

The System Diagnostics tool is valuable also for logging information and sending email to

Control4 Technical Support. See “System Diagnostics.”

x Account Services—Facilitates system registration which is required for software updates

and to use the media services throughout the Control4 system. It is also required in

conjunction with a 4Sight account to enable Remote Access, which allows secure access to

your system via the Internet. See “Account Services.”

x Update Manager—Lets you update the entire Control4 system. See “Update Manager.”

3.2.1.5.5 Network Tools Dialog

Use the Control4

Composer Network Tools dialog to view ZigBee devices, devices on the IP

network, and EmberNet Upgrade lists (for upgrades up to Release 1.7.4 and 1.8.2).

From the Tools menu, select Network Tools.

The Network Tools tabs describe the following:

x IP Network—Lists the devices on the IP network.

x ZigBee Network—Lists information about the ZigBee devices.

x EmberNet Upgrade—Lists updated information about ZigBee Pro devices that are being

updated. (This applies when you are upgrading from Release 1.7.x to 1.8.x. Refer to the

Composer Pro Software Release Update Instructions - Release 1.7.4 to 1.8.2 in the Control4

Knowledgebase or on the Control4 web site.) The devices appear in this tab temporarily, and

then after update, they appear in the ZigBee Network tab.

The icons denote the following: