Specifications

Composer Pro Getting Started

Saved: 6/28/2010 11:32:00 AM 200-00168_Composer Pro

Getting Started

Page 55 of 132

From the Go menu, you can access the various Composer Pro views: System Design (Ctrl+1),

Connections (Ctrl+2), Media (Ctrl+3), Agents (Ctrl+4), and Programming (Ctrl+5).

The following options are available:

x System Design—Lets you build the project tree and identify the devices in the Control4

system. Access this view with the keyboard shortcut Ctrl+1.

x Connections—Lets you identify all connections (Room, Control, AV, Network). Access this

view with the keyboard shortcut Ctrl+2.

x Media—Lets you add and scan stored or broadcast media. Access this view with the

keyboard shortcut Ctrl+3.

x Agents—Lets you set up agents for use on the system and programming. Agents include:

Lighting Scenes, Wakeup, Scheduler, Variables, etc. Access this view with the keyboard

shortcut Ctrl+4.

x Programming—Lets you program devices and agents on the system. Access this view with

the keyboard shortcut Ctrl+5.

3.2.1.5.4 Tools Menu

Access the Control4

Composer Tools menu from the menu bar on any Composer Pro screen.

From the Tools menu, you can access tools for checking the device connection status.

The following options are available:

x Network Tools—Launches the Network Tools window. Composer shows the status of all

network devices on the IP Network, ZigBee Network, or EmberNet Upgrade (for upgrades up

to Release 1.7.x and later) tabs. The Network Tools window shows you which devices in your

project are identified and communicating to the network. See “Network Tools Dialog.”

x System Manager—Launches a tool to connect to and configure Control4 Controller

hardware and devices. See “System Manager Dialog.”