Specifications

Composer Pro Getting Started

Saved: 6/28/2010 11:32:00 AM 200-00168_Composer Pro

Getting Started

Page 41 of 132

x Control Outputs—Shows the available output control connection.

x Room Control—Lists the available room control connections.

If the connections you need do not appear, you can edit the driver to create the needed connections.

From the Driver menu (in the Composer menu bar), select Edit Existing Driver to open the Driver

Wizard, DriverWorks.

Note: Editing drivers is an advanced task and is out of the scope for this Composer Pro Getting

Started document. Details about the Driver Wizard are discussed in the Composer Pro User Guide.

Example: To plug an AV Device into the Wireless Outlet Switch, edit the AV Device driver (such as a

Television driver) to see the connection and define to the system the tie between the Television and

the Wireless Outlet Switch.

3.2.1.2.3 Network Tab

Use the Control4

Composer Network tab in the Connections view to display a list of all devices in the

system that have a network connection and use a network address. Identify the network address for

any device that communicates to the Controller using TCP/IP, WiFi, ZigBee, or any other device that

uses a network address.