Specifications

Composer Pro Getting Started
Copyright © 2010 Control4. All Rights Reserved.
Saved: 6/28/2010 11:32:00 AM 200-00168_Composer Pro
Getting Started
Page 28 of 132
Properties Pane —
List View
Tab
Lists all the devices in a given room, the current state of contact inputs or
other devices. You can monitor and control the devices in the selected
location of the
project tree.
When selecting the site, building, floor, room, all of the devices associated in
that area are visible.
If a device is selected in the project tree, this view shows all devices that are
in the same room.
3.2.1.1.8 Items Pane
The Control4
®
Composer Items pane lets you build the project tree either by:
x Dragging and dropping items from the Items pane to the project tree, or
x Double-clicking the item in the Items pane (which adds it to the project tree).
3.2.1.1.8.1 Procedure
To access the Items pane:
1. Start Composer. The System Design view appears by default.
2. View the Items pane on the right side.
3. Click the Locations tab.