Specifications

Composer Pro Getting Started
Copyright © 2010 Control4. All Rights Reserved.
Saved: 6/28/2010 11:32:00 AM 200-00168_Composer Pro
Getting Started
Page 22 of 132
The project’s Properties appear when you first start Composer Pro, or any time the project name (or
root node) is selected in the project tree and the System Design view.
This option lets you enter project-specific information, such as the project name, location, zip code,
etc. Composer automatically enters the latitude/longitude and date/time information when you provide
the location and zip code.
Properties Pane -
Project Properties
Category Boxes or Buttons
Project Name—Lets you
enter/edit the name of the project.
N/A
Location—Lets you look up a
location’s latitude and longitude
based on city, state, country, etc.
Latitude/Longitude—Lets the system
calculate from the entered zip code, the
local latitude and longitude coordinate
information. Knowing location information
lets the system calculate local sunrise and
sunset times. This is useful for programming
lights to turn on at dusk and off at dawn.
Using a zip code to find the coordinates only
provides a close estimate of latitude and
longitude. If you want to enter exact
coordinates, the fields can be edited. Also
used for outside temperature on the Touch
Screens.
Lookup Button—Lets you enter/edit the zip
code which identifies to the system the local
cable, satellite, and broadcast channel
programming. It also automatically provides
latitude and longitude coordinate location.
Date and Time—Lets you set a
date, time, and time zone for the
Time zone—Lets you set the appropriate
time zone by clicking Edit. Changing the