Specifications

Composer Pro Getting Started

Saved: 6/28/2010 11:32:00 AM 200-00168_Composer Pro

Getting Started

Page 16 of 132

x Connect. Lets you connect to the Director that resides on the Controller attached to the local

network.

x Cancel. Cancels and closes the Directors dialog box.

x Add. Lets you add the Director’s address of the Controller to which you are trying to connect.

x Refresh. Lets you update the Directors list to display recently-added Directors.

3.1.2 Exit Composer

You can exit Composer two (2) ways:

x From the startup window (where you start Director), click Exit Composer.

x From the File menu (in the Composer project), select Exit.

As you exit, Composer prompts you to back up your project and media information to your local

computer. This is not required except when using a Virtual Director connection, but it is always good

practice to do so.

3.2 Composer Pro Views

3.2.1 Available Views

The Control4

Composer Pro application has five (5) main views in the bottom left pane. When you

select a view (see the figures below), the appearance and functionality of the Composer Pro interface

changes to reflect the configuration options for that view.

Tip: Collapse the views by clicking the dotted bar just above the views so you have more room to

view the project tree.