Specifications

Composer Pro Getting Started

Saved: 6/28/2010 11:32:00 AM 200-00168_Composer Pro

Getting Started

Page 115 of 132

4. Add Lighting and User Interface devices to the Theater.

Example: Select Theater in the project tree. In the My Drivers tab, do the following:

a. In Lighting > Light, double-click Wireless Dimmer, and then rename to Dimmer.

b. In Lighting > Light, double-click Wireless Switch, and then rename to Light Switch.

c. In Lighting > Light, double-click Wireless Outlet Switch, and then rename to Television

Outlet Switch.

d. In User Interface, double-click System Remote Control.

e. In User Interface, double-click 6 Button Keypad.

f. In User Interface, double-click LCD Keypad.

Tip: Use a descriptive name. When adding devices to the home, right-click and choose Rename to

rename them with a descriptive name. For example, if you have two (1) Dimmers in a room, give them

a descriptive name such as “Wall Dimmer” or “Ceiling Dimmer.” This helps you identify that specific

Dimmer later when identifying connections. If there's only one Dimmer or Switch in a room, however,

you can keep the generic title "Dimmer" or "Switch."

5. Add a Receiver to the Theater.

Example: Add a Receiver to the Theater room. To add, select Theater in the project tree. From the

My Drivers tab, do the following:

a. In Audio/Video, double-click Receiver.

b. In the dialog box that appears, choose Online Database, choose the manufacturer Harmon

Kardon, and then double-click AVR230[IR].