Specifications

Composer Pro Getting Started
Copyright © 2010 Control4. All Rights Reserved.
Saved: 6/28/2010 11:32:00 AM 200-00168_Composer Pro
Getting Started
Page 114 of 132
11.2.1 Procedure
To use the Composer System Design view:
1. Start Composer and connect to a Director.
2. Click System Design.
To add the devices:
3. Add the Controller to the Theater room in the project tree.
When setting up a system, first add the Controller to the list. You must attach a Controller to every
television you want added to the Control4 system.
In the project tree, choose the room (Theater) where you want the devices with the Controller to
reside. In the Items pane > My Drivers tab, double-click a Controller to move it to the room where it
resides (for example, HC300).
Note: If you installed this version of Composer on a computer with an older version of Composer,
right-click in the My Driver tab, and choose Restore Default List. This will update the My Driver list.
Example: Add a Home Controller to the Theater Room:
From the project tree, select Theater. In the Items pane > My Drivers tab under Controllers, double-
click the Controller or drag it to the room where it resides—in this case, the Theater.