Specifications

Composer Pro Getting Started
Copyright © 2010 Control4. All Rights Reserved.
Saved: 6/28/2010 11:32:00 AM 200-00168_Composer Pro
Getting Started
Page 108 of 132
8.1.2 Register the System Through a Touch Screen or On-Screen
Navigator
8.1.2.1 Procedure
IMPORTANT: To complete the registration through a Navigator, the Navigator must be installed,
connected to a Controller, and identified in the system.
To use a Navigator to set up a my.Control4.com account and register this system:
1. Go to
my.control4.com.
2. Click Create Account.
3. Complete the Create New Account form for the user according to the instructions on the page,
and then record the Account Name, E-mail Address and Password for the user’s future reference.
4. Click Create Account to create an account for this system.
5. On the Complete Registration page, click Yes.
6. On the Controller Registration Confirmation page, copy or write down the 10-digit registration
code displayed. This code is time-sensitive and must be used within 10 minutes. It provides a
temporary code used to exchange security parameters, and set up the ability to create a secure
connection between my.control4.com and the Controller.
7. Go to the Navigator's main menu (Home Page), and press More > Settings > Remote Access
(or Info > Remote Access on Navigators that use the older interface, for example the Mini Touch
Screen).
8. Select the text box in Enter Code, and then enter the 10-digit registration code.
9. When you are finished, click Done.
10. Choose Activate. When activation is completed, the user can use all media services, such as the
online media recognition service.