Specifications

Composer Pro Getting Started

Saved: 6/28/2010 11:32:00 AM 200-00168_Composer Pro

Getting Started

Page 107 of 132

4. Click Create Account to create an account for this Control4 system.

5. On the Complete Registration page, click Yes.

Note: If you click No, you cannot scan media in the system, and you must complete the

registration at a later time.

6. On the Controller Registration Confirmation page, copy the 10-digit registration code displayed

in the Account Services page in Composer (see next step). This code is time-sensitive and must

be used within 10 minutes. It provides a temporary code used to exchange the security

parameters and create a secure connection between my.control4.com and the Controller.

7. On the Account Services page, click the text box and paste the 10-digit registration code in the

box.

8. Click the Register button on the Account Services page in Composer (now enabled) to complete

the registration. The Current Status changes to 'Registered.'

9. (Optional) When the status is 'Registered,' you can enable or disable remote access. Keep the

Enable Remote Access box checked to allow Control4 access for system updates and to

support remote access to the user's home system through Web Navigator. Note: The user must

have a 4Sight subscription activated before they can use the Web Navigator.

10. (Temporary Access) To establish a service connection to the Controller for the system you are

registering, do the following:

a. In the current dialog box (Tools > Account Services), click Check In to request that the

system brings up a connection the next time it checks in.

b. From a connected On-Screen Navigator or Touch Screen, choose More > Settings >

Remote Access > Service Connection, then select Check In (or Info > Remote Access on

Navigators that use the older interface, for example the Mini Touch Screen). The next time

this system checks in for updates, the connection is maintained until you disconnect from its

Director in Composer.