Specifications

Composer Pro Getting Started
Copyright © 2010 Control4. All Rights Reserved.
Saved: 6/28/2010 11:32:00 AM 200-00168_Composer Pro
Getting Started
Page 105 of 132
8.1 Register the System at my.control4.com
Control4 recommends that you register each Control4 system you install at my.control4.com to
maintain the system software easily through online downloads. Only registered systems can use all of
the media services available. You must register the Controller, and then register online at
my.control4.com. Note: The online registration process completes both of these requirements.
System registration, which includes setting up a my.control4.com account, is required to use most of
the media services that are available in the Control4 system, for example, scanning media into the
system (so that you don’t need to manually add individual music files).
IMPORTANT: The Control4 system must be functioning correctly before registering. For example, if a
Disc Changer does not appear in the left pane, there is not a Disc Changer in the system to add
media to it. Contact your Control4 Dealer or Control4 Technical Support if the device does not
function as expected in the home network.
You can register the system now through Composer, or later through a Navigator if you customize the
Navigator. You may have already registered the system in Composer to set up media. If not, you can
register the system using any Internet connection and one of the Navigators that is connected and
identified.
8.1.1 Register the Controller from Composer
8.1.1.1 Procedure
To use Composer to set up a my.control4.com account and register this Control4 system:
1. In Composer, go to Tools > Account Services.
2. Click the Register your Controller link to create a my.Control4.com account and start the
registration process for the user.