Specifications

Composer Pro Getting Started

Saved: 6/28/2010 11:32:00 AM 200-00168_Composer Pro

Getting Started

Page 102 of 132

3. Follow the on-screen instructions in Interviewer, and respond to the questions as the wizard

builds and configures your Control4 system.

4. Be prepared to provide the following system information:

x Devices in each room that need to be added

x Device model numbers

x Types of connections (cabling) between devices

6.2.4.5 Using Composer Views to Build a Project

The Control4

Composer software lets you set up a Control4 system using different Composer views

for different tasks. In Composer views, you can add devices, make connections, set up media, and

program the system using devices and agents.

Note: This method is more detailed than using the Interviewer wizard. If you are new to designing a

project, you may want to try the Interviewer wizard method first until you are comfortable with Control4

system setup and configuration. Use Composer Pro views for more advanced projects.

In Composer views, you have the flexibility to follow any setup path you choose as long as a

Controller is the first device you add to the project. After you become familiar with the Control4 system

and projects, this is the quickest way to set up a project.

Note: Before you start to create a project, you will need to understand how to use the views.