Spec Sheet

ManualsBrandsSamsung ManualsFiber Optic TransmissionSmall 100Mbps Media Converter (A), SC, Single Mode

TMC-F Series

10/100 Mbps Ethernet Electrical To Optical Media Converters

with AC/DC Input or DC Input/30 W PoE Output

SPECIFICATIONS

Optical Fiber

Cat-5 Cable

AGENCY COMPLIANCE

Ethernet

Data Rate 10/100 Mbps

IEEE 802.3 Compliant

Full Duplex or Half Duplex Electrical Port/Full

Duplex Optical Port

Connectors

Optical

Power

Electrical

SFP; ST or SC, 1 or 2 Fibers

Terminal Block RJ45

Power

Operating Voltage Range

Power Consumption

Current Protection

PoE Pin Assignment

Maximum PoE Current

Non-PoE models:

AC: 22 to 27 VAC

DC: 8 to 24 VDC

PoE Models 48 to 57 VDC @ 0.85A

Non-PoE: 3W Max, PoE 33W

Automatic Resettable Solid-State Current Limiters

RJ-45 port supports IEEE802.3af/802.3at

End-point Positive (VCC+): RJ45 pin 1, 2 or 4, 5

Negative (VCC-): RJ45 pin 3, 6 or 7,8

Data: (1, 2, 3, 6)

625 mA continuous per mode

Electrical & Mechanical

LED Indicators Optical Link/Data Activity

Electrical Link/Data Activity

Power

Circuit Board Meets IPC Standard

Size (L×W×H) 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm)

Mini: 3.3 × 2.5 × 1.1 in (8.4 × 6.4 × 2.8 cm)

Shipping Weight: <2 lb /0.9 kg

Environmental

MTBF >100,000 hours

Operating Temp

Storage Temp

Relative Humidity

-40˚ C to +75˚ C

-40˚ C to +85˚ C

0% to 95% (non-condensing)

ORDERING INFORMATION

Part Number Description

TMC-FSTM1ACM-A Small 100Mbps Media Converter (A), ST Connector, AC/DC Power, mm, 1 fiber

TMC-FSTS1ACM-A Small 100Mbps Media Converter (A), ST Connector, AC/DC Power, sm, 1 fiber

TMC-FSTM1POEM-A Hardened 100Mbps Media Converter, ST Connector, mm, 1 fiber, “A” Unit, (requires “A” and “B” units) 48V, 30W POE output, Power Supply Not Included

TMC-FSTS1POEM-A Hardened 100Mbps Media Converter, ST Connector, sm, 1 fiber, “A” Unit, (requires “A” and “B” units) 48V, 30W POE output, Power Supply Not Included

TMC-FSTM1-B 100Mbps Media Converter (B), ST Connector, mm, 1 fiber

TMC-FSTS1-B 100Mbps Media Converter (B), ST Connector, sm, 1 fiber

TMC-FSCM1ACM-A Small 100Mbps Media Converter (A), SC Connector, AC/DC Power, mm, 1 fiber

TMC-FSCS1ACM-A Small 100Mbps Media Converter (A), SC Connector, AC/DC Power, sm, 1 fiber

TMC-FSCM1POEM-A Hardened 100Mbps Media Converter, SC Connector, mm, 1 fiber, “A” Unit, (requires “A” and “B” units) 48V,

30W POE output, Power Supply Not Included

TMC-FSCS1POEM-A

Hardened 100Mbps Media Converter, SC Connector, sm, 1 fiber, “A” Unit, (requires “A”

and “B” units) 48V

30W POE output, Power Supply Not Included

TMC-FSCM1-B

100Mbps Media Converter (B), SC Connector, mm, 1 fiber

TMC-FSCS1-B 100Mbps Media Converter (B), SC Connector, sm, 1 fiber

TMC-FSFPPOE30M Hardened 100Mbps Media Converter, SFP Required, 48V, 30W POE output, Power Supply Included

Accessories

Options

DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included, for benign 0 to 50ºC applications only. Hardened power supply PWR-DR12033 available)

PoE Power Supply (PWR-DR48060), DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (SBP-UDR), Card Cage Racks (SBP-C14 / SBP-C03 )

Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.

Distance can also be limited by fiber bandwidth.

NOTE: This product requires a fiber installation with a minimum 30 dB connector return loss. The use of Super Polish Connectors is

recommended. Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J.

In a continuing effort to improve and advance technology, product specifications are subject to change without notice.

TYPICAL APPLICATION

TMC-FSCM1ACM-A

TMC-FSTM1-B

1 Fiber, ST

Multimode

2 km (1.2 mi)

TMC-FSCM1POEM-ATMC-FSTM1-B

E E + PoE+

48V Power Supply

Ethernet device

FIRST EDITION