Operation Manual

Issues Solutions and Explanations
The product Signal
Information is unavailable in
the Self Diagnosis menu.
This function is only available for digital channels the product receives from an Aerial /
RF /Coax connection.
The product is tilted to the
side.
Remove the base stand from the product and reassemble it.
The channel menu is grayed
out (unavailable).
The Channel menu is only available when you select the product source.
Your settings are lost after
5 minutes or every time the
product is turned off.
If the product is in the Store Demo mode, it will reset audio and picture settings every
5 minutes. Change the settings from Store Demo mode to Home Use mode using
the Setup procedure. Select TV in the Source using your remote, and go to Menu →
System → Setup.
English - 72
English - 73
Other Information