SyncMaster U70 LCD Monitor User Manual
Safety Instructions Notational Note These safety instructions must be followed to ensure your safety and prevent property damage. Make sure to read the instructions carefully and use the product in the correct manner. Warning / Caution Otherwise, it may result in death or personal injury. Otherwise, it may result in personal injury or property damage.
Safety Instructions The product is a high voltage product. Ensure that users do not disassemble, repair or modify the product themselves. • Otherwise, this may result in electric shock or fire. If the product needs to be repaired, contact a Service Center.
Introduction Package Contents Note Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Unpacking USB Monitor Manuals Quick Setup Guide Warranty Card User's Guide (Not available in all locations) Cables USB Cable Others Cleaning Cloth Note Cleaning Cloth is only provided for highly polished black products as a product feature.
Introduction Your Monitor Front Use this button to decrease the screen brightness for the 7" USB monitor. The LED blinks when the screen brightness is decreased to the minimum or when a screen brightness adjustment is completed. Use this button to increase the screen brightness for the 7" USB monitor. The LED blinks when the screen brightness is increased to the maximum or when a screen brightness adjustment is completed.
Introduction Rear Note The configuration at the back of the product may vary from product to product. Connect the terminal of the USB monitor to the USB terminal of the PC using a USB cable. Kensington Lock The Kensington Lock is a device used to physically fix the system when using it in a public place. The locking device has to be purchased separately. The appearance and locking method may differ from the illustration depending on the manufacturer.
Introduction 3. Fix the Kensington Lock to a desk or a heavy stationary object.
Connections Connecting the USB Monitor • System Requirements CPU : 1.73GHz or Later OS : Windows XP Service Pack2 or later. RAM : 512 MB RAM or more USB : 1.1 or higher (USB 2.0 recommended) 1. Connect the terminal cable. of the USB monitor to the USB terminal of the PC using a USB Note As power is supplied through a USB port, two (2) USB ports are used. For more information on the driver installation and usage of the USB monitor, refer to Installing the 7” USB Monitor Driver.
Connections 1. When adjusting the angle of the USB auxiliary monitor stand, do not use too much force. This may cause the stand to break. 2. Make sure to use the 7” USB monitor after properly adjusting the angle of its stand. This may cause the center of gravity of the product to change, leading causing the product to fall resulting in damage or a malfunction.
Using the Software Installing the 7” USB Monitor Driver • System Requirements CPU : 1.73GHz or Later OS : Windows XP Service Pack2 or later. RAM : 512 MB RAM or more USB : 1.1 or higher (USB 2.0 recommended) Installing Your USB Monitor • Make sure to connect the USB cable and begin the installation after your PC has booted. • The Setup program requires about one minute for the installation.
Using the Software When setup is finished, a monitor icon is created in the system tray at the bottom of the monitor screen, and the information for the installed USB monitor is displayed. 5. When the installation is completed, configure the following settings to use multiple monitors. 1. Right-click on the “Windows Desktop” and select “Properties” from the displayed menu. The “Display Properties” window appears. 2. Select the “Settings” tab. A list of connected USB monitors is displayed. 3.
Using the Software 4. Then click "OK" button. Configuring the 7" USB Monitor Display Information 1. When the driver setup for the USB monitor is finished, a monitor icon is created in the system tray at the bottom of the monitor screen. 2. Click the monitor icon to display a list of connected USB monitors. Select the monitor for which you want to configure the display settings. You can configure the "Screen Resolution" , "Color Quality" and "Screen Rotation" settings for your monitor.
Using the Software 3. A list of the installed device will be displayed, as shown in the figure below.
Using the Software • Windows Vista: Supported. To check the information on the operating system of your PC, right-click “My Computer” on the “Windows Desktop” and select “Properties” from the displayed menu. Check the information in the “General” tab of the “Computer Properties” window. 1. Because this USB monitor is recognized as a USB device, the DOS screen that appears for general monitors when a PC is booting up is not displayed. 2.
Troubleshooting Check List Note Before calling for assistance, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the Information section or contact your dealer. There is no image on the screen. I cannot turn on the monitor. Q: Check whether the USB cable is connected correctly. Check whether the USB driver is installed. A: The USB monitor is recognized as a general USB device on a PC.
Troubleshooting A: - Configuring the Settings Set the Advanced -> Peripheral Configuration (Integrated Peripherals) -> Legacy USB Support item to [Enabled]. Save the settings and reboot the computer. A: - Entering the BIOS Setup screen may differ for each BIOS company. Refer to the user manual for your PC. For more information, visit the Microsoft website.
Specifications General General Model Name SyncMaster U70 LCD Panel Size 7" diagonal ( 17 cm) Display area 152.4 mm(H) x 91.4 mm(V) Pixel Pitch 0.1905 mm(H) x 0.1905 mm(V) Synchronization Horizontal 30 ~ 35 kHz Vertical 59 ~ 62 Hz Display Color 16.7M Resolution Optimum resolution 800x480@60Hz Maximum resolution 800x480@60Hz Input Signal, Terminated USB interface (Compliant Digital RGB) USB Format TTL level (V high ≥ 2.0 V, V low ≤ 0.
Specifications Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjusts the screen as follows. Display Mode Horizontal Frequency (kHz) IBM, 800 x 480 29.738 Vertical Fre- Pixel Clock quency (Hz) (MHz) 59.476 29.
Information PRODUCT INFORMATION (Image Retention Free) LCD Monitors and TVs may have image retention when switching from one image to another especially after displaying a stationary image for a long time. This guide is to demonstrate correct usage of LCD products in order to protect them from Image retention. Warranty Warranty does not cover any damage caused by image retention. Burn-in is not covered by the warranty.
Information Avoid using a combination of characters and background color with large difference in luminance. Avoid using Grey colors, which can cause Image retention easily. • Avoid: Colors with big difference in luminance (Black & White, Grey) Ex) • Recommended settings: Bright colors with little difference in luminance • Change the characters color and background color every 30 minutes Ex) • Every 30 minutes, change the characters with movement.
Information Normal conditions are defined as continuously changing video patterns. When the LCD panel is operated for a long time with a fixed pattern (-over 12 hours-), there may be slight difference in voltage between electrodes that work the liquid crystal (LC) in a pixel. The voltage difference between electrodes increases with time, forcing the liquid crystal to lean. When this occurs, the previous image may be seen when the pattern is changed.
Appendix Contact SAMSUNG WORLDWIDE Note If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. North America U.S.A 1-800-SAMSUNG(726-7864) http://www.samsung.com/us CANADA 1-800-SAMSUNG(726-7864) http://www.samsung.com/ca MEXICO 01-800-SAMSUNG (726-7864) http://www.samsung.com/mx Latin America ARGENTINE 0800-333-3733 http://www.samsung.com/ar BRAZIL 0800-124-421 http://www.samsung.
Appendix Europe BELGIUM 02 201 2418 http://www.samsung.com/be (Dutch) http://www.samsung.com/ be_fr (French) CZECH REPUBLIC 800 (800-726786) SAMSUNG http://www.samsung.com/cz DENMARK 8 - SAMSUNG (7267864) http://www.samsung.com/dk EIRE 0818 717 100 http://www.samsung.com/ie FINLAND 30 - 6227 515 http://www.samsung.com/fi FRANCE 01 4863 0000 http://www.samsung.com/fr GERMANY 01805 SAMSUNG http://www.samsung.de (7267864, € 0.14/Min) HUNGARY 06-80-SAMSUNG (726-7864) http://www.samsung.
Appendix Asia Pacific AUSTRALIA 1300 362 603 http://www.samsung.com/au CHINA 800-810-5858 http://www.samsung.com/cn 400-810-5858 010-6475 1880 INDIA HONG KONG:3698 - 4698 http://www.samsung.com/hk 3030 8282 http://www.samsung.com/in 1-800-3000-8282 1800 110011 INDONESIA 0800-112-8888 http://www.samsung.com/id JAPAN 0120-327-527 http://www.samsung.com/jp MALAYSIA 1800-88-9999 http://www.samsung.com/my NEW ZEALAND 0800 SAMSUNG (0800 726 http://www.samsung.
Appendix Correct Disposal Correct Disposal of This Product (Waste Electrical & Electronic Equipment) Europe only (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
