User manual SyncMaster S27A850T The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
Before Using the Product Copyright The contents of this manual are subject to change without notice to improve quality. © 2011 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. The SAMSUNG and SyncMaster logos are registered trademarks of Samsung Electronics. Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation.
Before Using the Product Icons used in this manual The following images are for reference only. Real-life situations may differ from what is shown in the images. Symbols for safety precautions A serious or fatal injury may result if instructions are not followed. Warning Caution Personal injury or damage to properties may result if instructions are not followed. Activities marked by this symbol are prohibited. Instructions marked by this symbol must be followed.
Before Using the Product Cleaning Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. Take the following steps when cleaning. 1. Power off the monitor and computer. 2. Disconnect the power cord from the monitor. Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock may result. 3. Wipe the monitor screen using a clean, soft and dry cloth.
Before Using the Product Securing the Installation Space z Ensure some space around the product for ventilation. An internal temperature rise may cause fire and damage the product. Be sure to allow the amount of space as shown below or greater when installing the product. The exterior may differ depending on the product. 10 cm 10 cm 10 cm 10 cm 10 cm Precautions for storage High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used nearby.
Before Using the Product Safety Precautions Electricity and Safety The following images are for reference only. Real-life situations may differ from what is shown in the images. Warning Do not use a damaged power cord or plug, or a loose power socket. z An electric shock or fire may result. Do not plug many products into the same power socket. z Otherwise, the socket may overheat and cause a fire. Do not touch the power plug with wet hands. z Otherwise, an electric shock may result.
Before Using the Product Caution Do not unplug the power cord when the product is in use. z The product may become damaged by an electric shock. Do not use the power cord for products other than authorized products supplied by Samsung. z ! An electric shock or fire may result. Keep the power socket where the power cord is connected unobstructed. z If any problem occurs in the product, unplug the power cable to completely cut the power to the product.
Before Using the Product Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.). z The product may fall and break or cause a personal injury. z Using the product in an area with excess vibration may damage the product or cause a fire. Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke. z ! An electric shock or fire may result.
Before Using the Product Put down the product carefully. z The product may fall and break or cause a personal injury. ! SAMSUNG ! Installing the product in an unusual place (a place exposed to a lot of fine particles, chemical substances or extreme temperatures, or an airport or train station where the product should operate continuously for an extended period of time) may seriously affect its performance.
Before Using the Product Do not put a heavy object, toy, or sweets on top of the product. z The product or heavy objects may fall as children try to reach for the toy or sweets resulting in a serious injury. During a lightning or thunderstorm, remove the power cord and do not touch the antenna cable. z ! An electric shock or fire may result. Do not drop objects on the product or apply impact. z An electric shock or fire may result. ! Do not move the product by pulling the power cord or any cable.
Before Using the Product 100 Do not insert a metallic object (a chopstick, coin, hair pin, etc.) or inflammable object (paper, match, etc.) into the vent or ports of the product. z If water or any foreign substance enters the product, be sure to power off the product, remove the power cord, and contact Samsung Customer Service Center (page 83). z Product failure, an electric shock or fire may result.
Before Using the Product Do not let water enter the DC power adapter or get the adapter wet. z An electric shock or fire may result. z Avoid using the product outdoors where it can be exposed to rain or snow. z Be careful not to get the DC power adapter wet when you wash the floor. Do not put the DC power adapter near to any heating apparatus. z Otherwise, a fire may result. Keep the DC power adapter in a well-ventilated area.
Before Using the Product Exercise caution when adjusting the product angle or stand height. ! z Otherwise, children's fingers or hands may become stuck and injured. z Tilting the product excessively may cause it to fall and result in personal injury. Do not place heavy objects on the product. z Product failure or personal injure may result. Correct posture to use the product Use the product in the correct posture as follows: z Straighten your back.
Table Of Contents BEFORE USING THE PRODUCT PREPARATIONS CONNECTING AND USING A SOURCE DEVICE 2 Copyright 3 3 Icons used in this manual Symbols for safety precautions 4 Cleaning 4 5 5 Cleaning Securing the Installation Space Precautions for storage 6 Safety Precautions 6 7 9 Electricity and Safety Installation and Safety Operation and Safety 13 Correct posture to use the product 19 Checking the Contents 19 20 Removing the Packaging Checking the Components 21 Parts 21 23 Frontal Butto
Table Of Contents SCREEN SETUP CONFIGURING TINT 30 Connecting and Using a PC 30 32 33 34 Connecting to a PC Driver Installation Setting Optimum Resolution Changing the Resolution Using a PC 37 Connecting Headphones 38 Connecting the Product to a PC as a USB HUB 38 38 Connecting a PC to the Product Utilizing the Product as a USB HUB 39 Connecting the Power 40 MAGIC 40 41 SAMSUNG MAGIC Bright SAMSUNG MAGIC Color 42 Brightness 42 Configuring Brightness 43 Contrast 43 Configuring Contr
Table Of Contents RESIZING OR RELOCATING THE SCREEN SETUP AND RESET 50 Color Tone 50 Configuring the Color Tone Settings 51 Gamma 51 Configuring Gamma 52 Size 52 Changing the Image Size 53 H-Position & V-Position 53 Configuring H-Position & V-Position 54 Menu H-Position & Menu V-Position 54 Configuring Menu H-Position & Menu VPosition 55 ECO 55 57 60 61 Eco Motion Sensor Eco Light Sensor Eco Saving Eco Icon Display 63 Menu Transparency 63 Changing Menu Transparency 64 Languag
Table Of Contents INFORMATION MENU AND OTHERS TROUBLESHOOTING GUIDE SPECIFICATIONS APPENDIX 69 Customized Key 69 Configuring Customized Key 70 Off Timer On/Off 70 Configuring Off Timer On/Off 71 Off Timer Setting 71 Configuring Off Timer Setting 72 Reset 72 Initializing Settings (Reset) 73 INFORMATION 73 Displaying INFORMATION 73 Configuring Brightness in the Initial Screen 74 Requirements Before Contacting Samsung Customer Service Center 74 74 74 Testing the Product Checking t
Table Of Contents INDEX Table Of Contents 18
1 1.1 Preparations Checking the Contents 1.1.1 Removing the Packaging 1 Open the packaging box. Be careful not to damage the product when you open the packaging with a sharp instrument. 2 Remove the styrofoam from the product. 3 Check the components and remove the styrofoam and plastic bag. 4 z The appearance of actual components may differ from the image shown. z This image is for reference only. Store the box in a dry area so that it can be used when moving the product in the future.
1 Preparations 1.1.2 Checking the Components z Contact the dealer from whom you purchased the product if any item is missing. z The appearance of the components and items sold separately may differ from the image shown. Components Quick setup guide Warranty card User manual (Not available in all locations) Power cable DC power adapter USB cable Dual-link DVI cable DP cable (optional) Stand base Components may vary depending on the country.
1 1.2 Preparations Parts 1.2.1 Frontal Buttons The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Icons Description z Open or close the onscreen display (OSD) menu, or return to the parent menu. z OSD control lock: Maintain the current settings, or lock the OSD control to prevent unintended changes to settings. To lock the OSD control, press the MENU button [ ] for five seconds.
1 Preparations Icons Description Adjust the screen brightness. Volume can be adjusted if a cable is connected to the [DP IN] or [HDMI IN] port. Confirm a menu selection. Pressing the [ ] button when the OSD menu is not displayed will change the input source (Digital/DisplayPort/HDMI). If you power on the product or change the input source by pressing the [ ] button, a message that shows the changed input source will appear at the top left corner of the screen.
1 Preparations 1.2.2 Reverse Side The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Port Ports Connect to the DC power adapter. Connects to a PC using a DP cable Connects to a PC via a DVI cable. Connect to a source device using an HDMI cable. Connect to a USB device. Connect to an audio output device such as headphones. Connect to a PC using a USB cable. This port can connect to a PC only.
1 1.3 Preparations Installation 1.3.1 Attaching the Stand Place a protective cloth or cushion on a flat surface. Next, place the product with the face down on top of the cloth or cushion. Insert the stand base into the stand in the direction of the arrow. Do not remove the fixing pin until you are finished attaching the stand. Tightly fasten the screw to the bottom of the base. After installing the stand, place the product upright. You can remove the fixing pin and adjust the stand now.
1 Preparations 1.3.2 Adjusting the Product Tilt and Height The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. z To adjust the height, remove the fixing pin. z The monitor tilt and height can be adjusted. z Hold the top center of the product and adjust the height carefully. 1.3.3 Rotating the Monitor Screen You can rotate your monitor as shown below. z Be sure to fully extend the stand before rotating the monitor.
1 Preparations 1.3.4 Installing a Wall-mount Kit or Desktop Stand Before Installation Power the product off and remove the power cable from the power socket. Place a protective cloth or cushion on a flat surface. Next, place the product with the face down on top of the cloth or cushion. Unfasten the screw from the back of the product. Lift and detach the stand.
1 Preparations Notes z Using a screw longer than the standard length can damage the internal components of the product. z The length of screws required for a wall mount that does not comply with the VESA standards may vary depending on the specifications. z Do not use screws that do not comply with the VESA standards. Do not attach the wall-mount kit or desktop stand using excessive force. The product may get damaged or fall and cause personal injury.
1 1.4 Preparations "MagicRotation Auto" The "MagicRotation Auto" function detects the rotation of monitors that are fitted with a rotation sensor and rotates the Windows screen accordingly. [Software Installation] 1 2 Insert the user manual CD provided with the product into the CD-ROM drive. Follow the instructions given on the screen to proceed with installation. After installation, the on-screen display (OSD) menu will be displayed in the language of the operating system.
2 2.1 Connecting and Using a Source Device Before Connecting 2.1.1 Pre-connection Checkpoints z Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may differ from device to device. z Do not connect the power cable until all connections are completed. Connecting the power cable during connection may damage the product. z Check the types of ports at the back of the product you want to connect.
2 2.2 Connecting and Using a Source Device Connecting and Using a PC 2.2.1 Connecting to a PC z Select a connection method suitable for your PC. Connecting parts may differ in different products. Connection using a Dual-link DVI cable (digital type) DVI IN 1 2 Connect the DVI cable to the [DVI IN] port on the back of the product and the DVI port on the PC. Connect the DC power adapter to the product and a power socket. Next, turn on the power switch on the PC. (For details, refer to "2.
2 Connecting and Using a Source Device Connection Using the HDMI Cable HDMI IN 1 Connect the HDMI cable to the [HDMI IN] port on the back of the product and the HDMI port on the PC. 2 Connect the DC power adapter to the product and a power socket. Next, turn on the power switch on the PC. (For details, refer to "2.5 Connecting the Power".) 3 Press [ ] on the product to change the input source to HDMI.
2 Connecting and Using a Source Device 2.2.2 Driver Installation z You can set the optimum resolution and frequency for this product by installing the corresponding drivers. z An installation driver is contained on the CD supplied with the product. z If the file provided is faulty, visit the Samsung homepage (http://www.samsung.com) and download the file. 1 2 3 4 Insert the user manual CD provided with the product into the CD-ROM drive.
2 Connecting and Using a Source Device 2.2.3 Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase. Select a language and change the resolution to the optimum value. The optimal resolution for this monitor is as follows: 2560 x 1440 60Hz Follow the above settings to set the resolution.
2 Connecting and Using a Source Device 2.2.4 Changing the Resolution Using a PC z Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality. z The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected. Changing the Resolution on Windows XP Go to Control Panel Display Settings and change the resolution.
2 Connecting and Using a Source Device Changing the Resolution on Windows Vista Go to Control Panel Personalization Display Settings and change the resolution.
2 Connecting and Using a Source Device Changing the Resolution on Windows 7 Go to Control Panel Display Screen Resolution and change the resolution.
2 2.3 Connecting and Using a Source Device Connecting Headphones 1 Connect an audio output device such as headphones or speakers to [ ] on the product. Headphones will function properly only when the product is connected to a PC via HDMI, or DP.
2 2.4 Connecting and Using a Source Device Connecting the Product to a PC as a USB HUB 2.4.1 Connecting a PC to the Product The product can function as a HUB by connecting to a PC via a USB cable. You can connect a source device directly to the product and control the device from the product, without having to connect the device to the PC. To use the product as a USB HUB, connect the product to a PC using a USB cable. Connect the USB cable to [ ] on the back of the product and [ ] (USB) on the PC. 2.
2 2.5 Connecting and Using a Source Device Connecting the Power Put the DC power adapter in the groove, with the switch facing upward. - Push the adapter until you hear a “click.” Connect the power cable to the DC power adapter. Next, connect the DC power adapter to the product. Plug in the power cable to the power socket. - Removing the DC power adapter To remove the DC power adapter, lift it outwards from the bottom as shown in the image.
3 3.1 Screen Setup Configure the screen settings such as brightness and color tone. MAGIC This feature optimizes the brightness and colors according to how the product will be used. 3.1.1 SAMSUNG MAGIC Bright This menu provides an optimum picture quality suitable for the environment where the product will be used. z SAMSUNG This menu is not available when MAGIC Color is in Full or Intelligent mode. z This menu is not available when Eco Light Sensor or Eco Saving is set to On.
3 Screen Setup 3.1.2 SAMSUNG MAGIC Color SAMSUNG MAGICColor is a new picture-quality improvement technology developed independently by Samsung, which delivers vivid natural colors without picture quality degradation. SAMSUNG This menu is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. SAMSUNG Configuring MAGIC Color 1 2 3 4 Press [ ] on the product. Press [ ] to move to PICTURE and press [ Press [ ] to move to MAGIC and press [ Press [ SAMSUNG ] on the product.
3 3.2 Screen Setup Brightness You can adjust the general brightness of the picture. (Range: 0~100) A higher value will make the picture appear brighter. z SAMSUNG This menu is not available when MAGIC Bright is set to Dynamic Contrast mode. z This menu is not available when Eco Light Sensor or Eco Saving is set to On. 3.2.1 Configuring Brightness 1 2 3 Press [ ] on the product. Press [ ] to move to PICTURE and press [ Press [ ] to move to Brightness and press [ ] on the product.
3 3.3 Screen Setup Contrast Adjust the contrast between the objects and background. (Range: 0~100) A higher value will increase the contrast to make the object appear clearer. z SAMSUNG This menu is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. z SAMSUNG This menu is not available when MAGIC Color is in Full or Intelligent mode. 3.3.1 Configuring Contrast 1 2 3 Press [ ] on the product.
3 3.4 Screen Setup Sharpness Make the outline of objects more clear or blurry. (Range: 0~100) A higher value will make the outline of objects clearer. z SAMSUNG This menu is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. z SAMSUNG This menu is not available when MAGIC Color is in Full or Intelligent mode. 3.4.1 Configuring Sharpness 1 2 3 Press [ ] on the product. Press [ ] to move to PICTURE and press [ Press [ ] to move to Sharpness and press [ ] on the product.
3 3.5 Screen Setup Response Time Accelerate the panel response rate to make video appear more vivid and natural. z It is best to set Response Time to Normal or Faster when you are not viewing a movie. z The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.5.1 Configuring Response Time 1 2 3 Press [ ] on the product. Press [ ] to move to PICTURE and press [ ] on the product. Press [ ] to move to Response Time and press [ ] on the product.
3 3.6 Screen Setup HDMI Black Level Configure the HDMI Black Level to adjust the picture quality. Available in HDMI mode only. 3.6.1 Configuring the HDMI Black Level Settings 1 2 3 Press [ ] on the product. Press [ ] to move to PICTURE and press [ ] on the product. Press [ ] to move to HDMI Black Level and press [ ] on the product. The following screen will appear.
4 Configuring Tint SAMSUNG Adjust the tint of the screen. This menu is not available when MAGIC Bright is set to Cinema or Dynamic Contrast mode. Red Adjust the value of the color red in the picture. (Range: 0~100) A higher value will increase the intensity of the color. SAMSUNG This menu is not available when MAGIC Color is in Full or Intelligent mode. 4.1.1 Configuring Red 1 2 3 Press [ ] on the product.
4 Green Adjust the value of the color green in the picture. (Range: 0~100) A higher value will increase the intensity of the color. SAMSUNG This menu is not available when MAGIC Color is in Full or Intelligent mode. 4.2.1 Configuring Green 1 2 3 Press [ ] on the product. Press [ ] to move to COLOR and press [ Press [ ] to move to Green and press [ ] on the product. ] on the product. The following screen will appear.
4 Blue Adjust the value of the color blue in the picture. (Range: 0~100) A higher value will increase the intensity of the color. SAMSUNG This menu is not available when MAGIC Color is in Full or Intelligent mode. 4.3.1 Configuring Blue 1 2 3 Press [ ] on the product. Press [ ] to move to COLOR and press [ Press [ ] to move to Blue and press [ ] on the product. ] on the product. The following screen will appear.
4 Color Tone Adjust the general color tone of the picture. SAMSUNG This menu is not available when MAGIC Color is in Full or Intelligent mode. 4.4.1 Configuring the Color Tone Settings 1 2 3 Press [ ] on the product. Press [ ] to move to COLOR and press [ Press [ ] to move to Color Tone and press [ ] on the product. ] on the product. The following screen will appear. COLOR Green 50 Blue 50 Color Tone Gamma 4 5 Red 4.
4 Gamma Adjust the mid-range brightness (Gamma) of the picture. 4.5.1 Configuring Gamma 1 2 3 Press [ ] on the product. Press [ ] to move to COLOR and press [ ] on the product. Press [ ] to move to Gamma and press [ ] on the product. The following screen will appear. COLOR Green 50 Blue Color Tone Normal Gamma Press [ 50 4 5 Red 4.5 Configuring Tint Mode1 Mode2 Mode3 50 ] to move to the option you want and press [ ]. The selected option will be applied.
5 5.1 Resizing or Relocating the Screen Size Change the picture size. 5.1.1 Changing the Image Size 1 2 3 Press [ ] on the product. Press [ ] to move to SIZE&POSITION and press [ Press [ ] to move to Image Size and press [ ] on the product. ] on the product. The following screen will appear. SIZE&POSITION Image Size H-Position Auto Wide V-Position Menu H - Position 50 Menu V - Position 3 z Auto: Display the picture according to the aspect ratio of the input source.
5 5.2 Resizing or Relocating the Screen H-Position & V-Position H-Position: Move the screen to the left or right. V-Position: Move the screen up or down. The options above are enabled only when Image Size is set to Screen Fit. 5.2.1 Configuring H-Position & V-Position 1 2 3 Press [ ] on the product. Press [ ] to move to SIZE&POSITION and press [ ] on the product. Press [ ] to move to H-Position or V-Position, and press [ ] on the product. The following screen will appear.
5 5.3 Resizing or Relocating the Screen Menu H-Position & Menu V-Position Menu H-Position: Move the menu screen to the left or right. Menu V-Position: Move the menu screen up or down. 5.3.1 Configuring Menu H-Position & Menu V-Position 1 2 3 Press [ ] on the product. Press [ ] to move to SIZE&POSITION and press [ ] on the product. Press [ ] to move to Menu H-Position or Menu V-Position, and press [ ] on the product. The following screen will appear.
6 6.1 Setup and Reset ECO The Eco Motion Sensor, Eco Light Sensor, and Eco Saving options are displayed on the same menu page so that you can conveniently configure the power saving settings. 6.1.1 Eco Motion Sensor The Eco Motion Sensor activates to save power when it does not detect any movement within a specified area for a specified period of time. Eco Motion Sensor is not available when the monitor is used in portrait mode. Configuring Eco Motion Sensor 1 2 3 4 Press [ ] on the product.
6 Setup and Reset 6 The selected option will be applied. Configuring Backlight 1 2 3 4 Press [ ] on the product. Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to ECO and press [ Press [ ] to move to Backlight and press [ ] on the product. ] on the product. ] on the product. The following screen will appear.
6 Setup and Reset 6.1.2 Eco Light Sensor The Eco Saving feature optimizes the view condition and contributes to power saving by adjusting the screen brightness depending on the ambient light intensity. z SAMSUNG This menu is not available when MAGIC Bright is set to Dynamic Contrast mode. z This menu is not available when Eco Saving is set . Configuring Eco Light Sensor 1 2 3 4 Press [ ] on the product.
6 Setup and Reset Configuring Sensitivity 1 2 3 4 Press [ ] on the product. Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to ECO and press [ Press [ ] to move to Sensitivity and press [ ] on the product. ] on the product. ] on the product. The following screen will appear.
6 Setup and Reset Configuring Brightness Level 1 2 3 4 Press [ ] on the product. Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to ECO and press [ Press [ ] to move to Brightness Level and press [ ] on the product. ] on the product. ] on the product. The following screen will appear.
6 Setup and Reset 6.1.3 Eco Saving The Eco Saving function reduces power consumption by controlling the electric current used by the monitor panel. z SAMSUNG This menu is not available when MAGIC Bright is set to Dynamic Contrast mode. z This menu is not available when Eco Light Sensor is set. Configuring Eco Saving 1 2 3 4 Press [ ] on the product.
6 Setup and Reset 6.1.4 Eco Icon Display Configuring Eco Icon Display 1 2 3 4 Press [ ] on the product. Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to ECO and press [ Press [ ] to move to Eco Icon Display and press [ ] on the product. ] on the product. ]. The following screen will appear.
6 Setup and Reset z If the screen becomes brighter as the ambient light becomes brighter, the brightness slide bar level will increase with a sun image displayed. If the screen becomes darker, the brightness slide bar level will decrease with a moon image displayed. The brightness slide bar will be displayed for 3 seconds after the sensor activates. You've saved * tree(s). z A pop-up as shown above will appear when an energy tree completes while Eco Icon Display is On.
6 6.2 Setup and Reset Menu Transparency Set the transparency for the menu windows: 6.2.1 Changing Menu Transparency 1 2 3 Press [ ] on the product. Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Menu Transparency and press [ ] on the product. ] on the product. The following screen will appear.
6 6.3 Setup and Reset Language Set the menu language. z A change to the language setting will only be applied to the onscreen menu display. z It will not be applied to other functions on your PC. 6.3.1 Changing the Language 1 2 3 Press [ ] on the product. Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Language and press [ ] on the product. ] on the product. The following screen will appear.
6 6.4 Setup and Reset PC/AV Mode Set PC/AV Mode to AV. The picture size will be enlarged. This option is useful when you view a movie. 6.4.1 Configuring PC/AV Mode 1 2 3 Press [ ] on the product. Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to PC/AV Mode and press [ ] on the product. ] on the product. The following screen will appear. PC/AV Mode HDMI PC AV On Display Port PC DVI 4 5 Press [ ] to move to the option you want and press [ ].
6 6.5 Setup and Reset Auto Source You can activate Auto Source. 6.5.1 Configuring Auto Source 1 2 3 Press [ ] on the product. Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Auto Source and press [ ] on the product. ] on the product. The following screen will appear.
6 6.6 Setup and Reset Display Time Set the on-screen display (OSD) menu to automatically disappear if the menu is not used for a specified period of time. Display Time can be used to specify the time after which you want the OSD menu to disappear. 6.6.1 Configuring Display Time 1 2 3 Press [ ] on the product. Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Display Time and press [ ] on the product. ] on the product. The following screen will appear.
6 6.7 Setup and Reset Key Repeat Time Control the response rate of a button when the button is pressed. 6.7.1 Configuring Key Repeat Time 1 2 3 Press [ ] on the product. Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Key Repeat Time and press [ ] on the product. ] on the product. The following screen will appear.
6 6.8 Setup and Reset Customized Key You can set Customized Key to the mode you want as follows. 6.8.1 Configuring Customized Key 1 2 3 Press [ ] on the product. Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Customized Key and press [ ] on the product. ] on the product. The following screen will appear. SETUP&RESET Customized Key Off Timer On/Off MAGIC Image Size Off Timer Setting Reset z 4 5 MAGIC - Image Size.
6 6.9 Setup and Reset Off Timer On/Off You can set the product to automatically turn off. 6.9.1 Configuring Off Timer On/Off 1 2 3 Press [ ] on the product. Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Off Timer On/Off and press [ ] on the product. ] on the product. The following screen will appear.
6 Setup and Reset 6.10 Off Timer Setting The off timer can be set within a range of 1 to 23 hours. The product will automatically power off after the specified number of hours. This menu is available only when Off Timer On/Off is set to On. 6.10.1 Configuring Off Timer Setting 1 2 3 Press [ ] on the product. Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Off Timer Setting and press [ ] on the product. ] on the product. The following screen will appear.
6 Setup and Reset 6.11 Reset Return all the settings for the product to the default factory settings. 6.11.1 Initializing Settings (Reset) 1 2 3 Press [ ] on the product. Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Reset and press [ ] on the product. ] on the product. The following screen will appear. Reset all settings? Yes No EXIT 4 5 Press [ ] to move to the option you want and press [ ]. The selected option will be applied.
7 7.1 INFORMATION Menu and Others INFORMATION View the current input source, frequency and resolution. 7.1.1 Displaying INFORMATION 1 2 Press [ Press [ ] on the product. ] to move to INFORMATION. The current input source, frequency and resolution will appear. PICTURE COLOR SIZE&POSITION SETUP&RESET Digital 65.4kHz 60Hz NP 1680x1050 Optimal Mode 2560 x 1440 60 Hz INFORMATION EXIT 7.
8 8.1 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center 8.1.1 Testing the Product Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Check if your product is operating normally by using the product test function. If the screen is turned off and the power indicator blinks even though the product is properly connected to a PC, perform a self-diagnosis test.
8 Troubleshooting Guide Screen issue Not Optimum Mode is displayed. This message appears if the signal from the graphics card exceeds the maximum resolution or frequency for the product. Change the maximum resolution and frequency to suit the product performance, referring to Standard Signal Mode Table (page 81). The images on the screen look distorted. Check the cable connection to the product (Refer to "2.2 Connecting and Using a PC") The screen is not clear. The screen is blurry.
8 Troubleshooting Guide Sound issue The volume is too low. Adjust the volume. If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound card or software program. Source device issue A beeping sound is heard when my PC is booting. If a beeping sound is heard when your PC is booting, have your PC serviced.
8 8.2 Troubleshooting Guide Q&A Question How can I change the frequency? Answer Set the frequency on your graphics card. z Windows XP: Go to Control Panel Themes Display Settings Appearance and Advanced Monitor, and adjust Refresh rate under Monitor settings. z Windows ME/2000: Go to Control Panel Settings Advanced Display Monitor, and adjust Refresh rate under Monitor settings.
8 Troubleshooting Guide Question How can I change the resolution? Answer z Windows XP: Go to Control Panel Themes z Display Appearance and Settings, and adjust the resolution. Windows ME/2000: Go to Control Panel Display Settings, and adjust the resolution. z Windows Vista: Go to Control Panel Personalization Personalize Appearance and Display Settings, and adjust the resolution.
9 9.1 Specifications General Model Name Panel Synchronization Size 27 inches (68 cm) Display area 596.74 mm(H) x 335.66 mm(V) Horizontal Frequency 31~90 kHz Vertical Frequency 56~76 Hz Display Color Resolution S27A850T 16.7M (True 8 bit) Optimum Resolution 2560 x 1440 @ 60 Hz Maximum Resolution 2560 x 1440 @ 60 Hz Maximum Pixel Clock 330MHz (DVI-D, DP) Power Supply This product uses 100 to 240V.
9 Specifications This Class B device designed for home use is registered for EMC requirements and can be used in all regions. (USA Only) Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.com/recyclingdirect or call, (877) 278 - 0799 9.
9 9.3 Specifications Standard Signal Mode Table This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Therefore, a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for the screen size of your product.
9 Specifications Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) VESA,1600 x 1200 75.000 60.000 162.000 +/+ VESA,1680 x 1050 65.290 59.954 146.250 -/+ VESA,1920 x 1200 74.556 59.885 193.250 -/+ VESA, 2560 x 1440(RB) 88.787 59.951 241.500 +/- z Horizontal Frequency The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle.
Appendix Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung.com CANADA 1-800-SAMSUNG (726-7864) http://www.samsung.com/ca http://www.samsung.com/ch_fr (French) MEXICO 01-800-SAMSUNG (726-7864) http://www.samsung.com LATIN AMERICA ARGENTINA 0800-333-3733 http://www.samsung.com BRAZIL 0800-124-421 4004-0000 http://www.samsung.
Appendix EUROPE ALBANIA 42 27 5755 http://www.samsung.com AUSTRIA 0810 - SAMSUNG (7267864, € 0.07/min) http://www.samsung.com BELGIUM 02-201-24-18 http://www.samsung.com/be (Dutch) http://www.samsung.com/be_fr (French) BOSNIA 05 133 1999 http://www.samsung.com BULGARIA 07001 33 11 http://www.samsung.com CROATIA 062 SAMSUNG (062 726 7864) http://www.samsung.com CZECH 800 - SAMSUNG (800-726786) http://www.samsung.com Samsung Electronics Czech and Slovak, s.r.o.
Appendix EUROPE PORTUGAL 808 20 - SAMSUNG (808 20 http://www.samsung.com 7267) RUMANIA From landline : 08010-SAMSUNG http://www.samsung.com (7267864) From landline & mobile : (+40) 21 206 01 10 SERBIA 0700 Samsung (0700 726 7864) http://www.samsung.com SLOVAKIA 0800 - SAMSUNG http://www.samsung.com (0800-726 786) SPAIN 902 - 1 - SAMSUNG (902 172 678) http://www.samsung.com SWEDEN 0771 726 7864 (SAMSUNG) http://www.samsung.com SWITZERLAND 0848-SAMSUNG (7267864, CHF 0.08/min) http://www.
Appendix CIS UKRAINE 0-800-502-000 http://www.samsung.com/ua http://www.samsung.com/ ua_ru BELARUS 810-800-500-55-500 http://www.samsung.com MOLDOVA 00-800-500-55-500 http://www.samsung.com ASIA PACIFIC AUSTRALIA 1300 362 603 http://www.samsung.com NEW ZEALAND 0800 SAMSUNG (0800 726 786) http://www.samsung.com CHINA 400-810-5858 http://www.samsung.com HONG KONG (852) 3698 - 4698 http://www.samsung.com/hk http://www.samsung.com/ hk_en/ INDIA 1800 1100 11 http://www.samsung.
Appendix MIDDlE EAST IRAN 021-8255 http://www.samsung.com OMAN 800-SAMSUNG (726-7864) http://www.samsung.com KUWAIT 183-2255 http://www.samsung.com BAHRAIN 8000-4726 http://www.samsung.com EGYPT 08000-726786 http://www.samsung.com JORDAN 800-22273 http://www.samsung.com MOROCCO 080 100 2255 http://www.samsung.com SAUDI ARABIA 9200-21230 http://www.samsung.com U.A.E 800-SAMSUNG (726-7864) http://www.samsung.com AFRICA CAMEROON 7095- 0077 http://www.samsung.
Appendix Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
Appendix Terminology OSD(On Screen Display) On screen display (OSD) allows you to configure on-screen settings to optimize the picture quality as required. It allows you to change the screen brightness, tint, size and many other settings using menus displayed on the screen. HUB HUB refers to a device that is a common connection point for multiple devices connected over a network. It is used to connect multiple PCs, video devices, office devices and/or LANs over a single network.
Appendix Vertical Frequency One image is made of numerous horizontal lines. The vertical frequency is measured in Hz and represents how many images can be created per second by those horizontal lines. A vertical frequency of 60 means that an image is transmitted 60 times per second. The vertical frequency is also called "refresh rate" and affects screen flicker. Resolution Resolution is the number of horizontal pixels and vertical pixels that form a screen. It represents the level of display detail.
Index A K Auto Source 66 Key Repeat Time 68 B L Before Connecting 29 Language 64 Blue 49 Brightness 42 M MAGIC 40 C Menu H-Position & Menu V-Position 54 Checking the Contents 19 Menu Transparency 63 Cleaning 4 Color Tone 50 Configuring Brightness in the Initial Screen 73 Connecting and Using a PC 30 O Off Timer On/Off 70 Off Timer Setting 71 Connecting Headphones 37 Contrast 43 Copyright 2 Correct Disposal of This Product 88 Correct posture to use the product 13 P Parts 21 PC/AV Mode 65 Po
Index Standard Signal Mode Table 81 T Terminology 89 U Utilizing the Product as a USB HUB 38 Index 92
