Flat Panel Television User's Manual
Table Of Contents
- Before Using the Product
- Table Of Contents
- Preparations
- 3D
- Connecting and Using a Source Device
- Screen Setup
- Configuring Tint
- Resizing or Relocating the Screen
- Setup and Reset
- INFORMATION Menu and Others
- Troubleshooting Guide
- Specifications
- Appendix
- Index
32
3 Connecting and Using a Source Device
3
Connecting and Using a Source Device
3.1 Before Connecting
3.1.1 Pre-connection Checkpoints
z Before connecting a source device, read the user manual provided with it.
The number and locations of ports on source devices may differ from device to device.
z Do not connect the power cable until all connections are completed.
Connecting the power cable during connection may damage the product.
z Check the types of ports at the back of the product you want to connect.
3.2 Connecting the Power
z Connect the power adapter to [DC 14V] on the rear of the product. Connect the power cord to the
adapter and wall socket. (The input voltage is switched automatically.)
DC 14V