SyncMaster 720TD Install drivers Install programs
Notation Failure to follow directions noted by this symbol could result in bodily harm or damage to equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Grounding to prevent an electric shock Power When not used for extended period of time, set your computer to DPMS. If using a screen saver, set it to the active screen mode. Do not use a damaged or loose plug. This may cause an electric shock or fire.
Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause an electric shock or fire. Use only a properly grounded plug and receptacle. An improper ground may cause electric shock or equipment damage. Insert the power plug firmly so that it does not come loose. A bad connection may cause fire. Do not excessively bend the plug and wire nor place heavy objects upon them, which could cause damage. This may cause an electric shock or fire.
Do not drop the monitor when moving it. This may cause damage to the product or human body. Install the monitor base in a showcase or shelf so that the end of the base does not protrude from the showcase or shelf. Dropping the product may cause damage to the product or personal injury. Do not place the product on an unstable or small surface area. Place the product on an even, stable surface, as the product may fall and cause harm to someone walking by, specifically children.
The monitor could be damaged or broken. Do not place the monitor face down. The TFT-LCD surface may be damaged. Installing a wall bracket must be done by a qualified professional. Installation by unqualified personnel may result in injury. Always use the mounting device specified in the owner's manual. When installing the product, make sure to keep it away from the wall (more than 10 cm/4 inch ) for ventilation purposes.
Make sure to unplug the power cord before cleaning the product. Otherwise, this may cause electric shock or fire. Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air freshener, lubricant or detergent. Contact the Service Center or Customer Center for interior cleaning once a year. Keep the product's interior clean.
Oral contact with the electronic pen or using a damaged battery may adversely affect the human body. If the battery in the electronic pen is damaged and human skin is contaminated with the fluid from the battery, wash the skin with flowing water for 1 to 2 minutes. Do not damage the electronic pen with a gimlet or tack and do not disassemble the electronic pen. There is a danger of a fire or explosion. Others Do not remove cover (or back). This may cause an electric shock or fire.
Do not move the monitor right or left by pulling only the wire or the signal cable. This may cause a breakdown, electric shock or fire due to damage to the cable. Do not cover the vents on the monitor cabinet. Bad ventilation may cause a breakdown or fire. Do not place water containers, chemical products or small metal objects on the monitor. This may cause malfunction, an electric shock or fire. If a foreign substance enters the monitor, unplug the power cord and contact the Service Center.
Inappropriate resolution may cause undesirable picture quality. 17 inch (43 cm) - 1280 x 1024 Keep all power adaptors apart. Failure to do so may cause fire. Keep power adaptor away from any other heat source. Failure to do so may cause fire. Remove and discard vinyl bag from power adaptor before use. Failure to do so may cause fire. Always keep power adaptor in well-ventilated area. Be careful that adaptor should not be in contact with water and therefore not be wet.
Dropping the product may cause damage to the product or personal injury. Using the product in a location prone to vibrations may shorten the lifetime of the product or may catch fire. When moving the monitor, turn off and unplug the power cord. Make sure that all cables, including the antenna cable and cables connected to other devices, are disconnected before moving the monitor. Failure to disconnect a cable may damage it and lead to fire or an electric shock.
PRODUCT INFORMATION (Image Retention Free) LCD Monitors and TVs may have image retention when switching from one image to another especially after displaying a stationary image for a long time. This guide is to demonstrate correct usage of LCD products in order to protect them from Image retention. What is Image retention ? During normal operation of a LCD panel, pixel image retention doesn't occur.
The best way to protect your monitor from Image retention is to set your PC or System to operate a Screen Saver program when you are not using it. Image retention may not occur when a LCD panel is operated under normal conditions. Normal conditions are defined as continuously changing video patterns. When the LCD panel is operated for a long time with a fixed pattern (-over 12 hours-), there may be slight difference in voltage between electrodes that work the liquid crystal (LC) in a pixel.
Features What is a Tablet Monitor? A Graphics Drawing Tablet is used for sketching new images or tracing existing images. The user makes contact with the tablet using a wired or wireless pen or puck. If a user draws a drawing with a pen or puck, the screen pointer draws the corresponding image. Since a puck can pinpoint the edge or terminal precisely using the cross hairs viewable through the transparent lens, it is preferred by users who draw precise scientific drawings.
→ Resource-saving since it does not require paper, pen or scanner - easy drawing and editing. Package Contents Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items.
Cleaning Cloth Sold separately D-sub Cable Your Monitor Front MENU button [ ] Opens the OSD menu.
previous menu. MagicBright™ button [ ] MagicBright™ is a new feature providing optimum viewing environment depending on the contents of the image you are watching. Currently six different modes are available: Custom, Text, Internet, Game, Sport and Movie. Each mode has its own preconfigured brightness value. You can easily select one of six settings by simply pressing MagicBright™ control button.
The configuration at the back of the monitor may vary from product to product. PC Connection Port RGB OUT Port To purchase a cable, contact the nearest Service Center. RGB IN + USB Port It is installed on your product. To purchase an additional cable, contact the nearest Service Center.
DC 14V Connection Port This product supports both 110V and 220V. (The voltage is automatically selected by the DC Adaptor.) After connecting the cables, connect the power cord to the wall outlet. DC OUT Port Connect the electronic pen charger. Kensington Lock The Kensington lock is a device used to physically fix the system when using it in a public place. The locking device has to be purchased separately. For using a locking device, contact where you purchase it.
Connecting Cables Connect the power cord to the DC power supply and to the 220V or 110V wall outlet. (The voltage is automatically selected by the power supply.) To use the D-Sub (analog) output through another device (monitor, TV, projector, etc.) - Connect the RGB OUT port of the monitor and the D-Sub port of another device using the D-Sub cable.
Using Macintosh - Connect the monitor and the Macintosh computer using the computer connection cable (Tableau Signal Cable). If you are using an old model Macintosh, connect the monitor and the Macintosh using a Macintosh adaptor (sold separately). If the monitor and the computer are connected, you can turn them on and use them. Using the Stand Using the Tablet Press the Signal button to activate it. (The buttons are raised when the Tablet function is turned on.
Pen Tip Switch This part makes contact with the screen and plays the role of the left mouse button. Press the pen once lightly on the screen for a click and press the pen twice for a double-click operation. Signal Transmitter This part transmits the signal and notifies its position. Pen Switch Plays the role of the right mouse button. Charge LED Red means the charge is not complete. Green means the charge is completed. Pen Power Switch The switch used to turn the pen on or off.
the Pen Tip Replacing the Pen Lead z If the recommended cleaning solution is not available, dilute a cleaning solution with water at a ratio of 1:10. As the pen is used, the pen tip will become worn out. If the abrasions are severe or you experiencing difficulties when using it, replace the pen lead. To purchase a pen lead, contact the nearest Service Center. If the pen tip is worn and a sharp part appears at the tip, it may damage the screen. Replace the pen lead periodically.
Anchors (3) Screws (3) (For wall mount) Screws (4) To purchase an optional product, contact a Samsung Electronics Service Center. Installing the Bracket (wall mount) Bracket (main body) Installation Method 1 Fold the monitor stand and place the bracket (main body) at the bottom of the stand. Align the groove of the bracket (main body) and the groove of the monitor stand and fix them firmly with 2 screws.
Fold the monitor stand and rotate it so that the cable connection ports face the floor. Place the bracket (main body) at the bottom of the stand. Align the groove of the bracket (main body) and the groove of the monitor stand and fix them firmly with 4 screws. Connecting Other Stands The size of the stand installation surface of the monitor is 75mm x 75mm and is compatible with the VESA standard.
When installed by Bracket (main body) Installation Method 1 When installed by Bracket (main body) Installation Method 2
Tableau Program Installation Procedures Insert the Tableau Installation CD into the CD-ROM drive. Click on the Tableau Setup program. If the Installation Wizard screen appears, click on the 'Next' button. Enter the user information and click on 'Next'.
Click on 'Install'. The installation progress screen appears. Click on 'Finish'.
When the installation is completed, the Tableau shortcut icon is created on the Desktop. The Tableau icon [ ] is also created in the Taskbar (System Tray). Click on the Tableau icon [ ] and select a Tableau menu. Menus When clicking the Tableau icon [ ], the Tableau menu window appears. Mouse pointer positional adjustment menu. Tableau program properties. Select to exit the Tableau program.
When locating the pen tip at the center, you can adjust the mouse pointer position more easily. Press the 'ESC' key on the keyboard to cancel the settings and close the window. Press the 'Enter' key on the keyboard to save the settings and close the window. You can adjust the position by using the direction keys on the keyboard. Monitor Driver When prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor.
Click the "Install" button in the "Warning" window. Monitor driver installation is completed. Windows XP/2000 Insert CD into the CD-ROM drive. Click "Windows XP/2000 Driver". Choose your monitor model in the model list, then click the "OK" button. If you can see following message window, then click the "Continue Anyway" button. Then click "OK" button. This monitor driver is under certifying MS logo, and this installation don't damage your system.
Windows XP | Windows 2000 | Windows ME | Windows NT | Linux Microsoft® Windows® XP Operating System Insert CD into the CD-ROM drive. Click "Start" → "Control Panel" then click the "Appearance and Themes" icon. Click "Display" icon and choose the "Settings" tab then click "Advanced...". Click the "Properties" button on the "Monitor" tab and select "Driver" tab. Click "Update Driver..." and select "Install from a list or..." then click "Next" button. Select "Don't search ,I will...
Click the "Browse" button then choose A:(D:\Driver) and choose your monitor model in the model list and click the "Next" button. If you can see following "Message" window, then click the "Continue Anyway" button. Then click "OK" button. This monitor driver is under certifying MS logo, and this installation don't damage your system. The certified driver will be posted on Samsung Monitor homepage http://www.samsung.com/ Click the "Close" button then click "OK" button continually.
Monitor driver installation is completed. Microsoft® Windows® 2000 Operating System When you can see "Digital Signature Not Found" on your monitor, follow these steps. Choose "OK" button on the "Insert disk" window. Click the "Browse" button on the "File Needed" window. Choose A:(D:\Driver) then click the "Open" button and then click "OK" button. How to install Click "Start" , "Setting" , "Control Panel". Double click the "Display" icon. Select the "Settings" tab and click "Advanced Properties" button.
Click "Apply" button if you see the screen working normally after clicking "Test". If the screen is not normal, change to a different mode (lower mode of resolution, colors or frequency). If there is no Mode at All Display Modes, select the level of resolution and vertical frequency by referring to the Preset Timing Modes in the user guide. Linux Operating System To execute X-Window, you need to make the X86Config file, which is a type of system setting file.
How to delete the Natural Color software program Select "Setting/Control Panel" on the "Start" menu and then double-click "Add/Delete a program". Select Natural Color from the list and then click the "Add/Delete" button. Overview | Installation | OSD Mode | Color Calibration | Uninstall | Troubleshooting Overview What is MagicTune™? Monitor performance can vary due to the graphics card, host computer lighting conditions and other environmental factors.
3. Select installation Language, Click "Next". 4. When the Installation Shield Wizard window appears, click "Next." 5. Select "I agree to the terms of the license agreement" to accept the terms of use. 6. Choose a folder to install the MagicTune™ program.
7. Click "Install." 8. The "Installation Status" window appears. 9. Click "Finish.
10. When the installation is complete, the MagicTune™ executable icon appears on your desktop. Double-click the icon to start the program. MagicTune™ execution icon may not appear depending on specification of computer system or monitor. If that happens, press F5 Key. Installation Problems The installation of MagicTune™ can be affected by such factors as the video card, motherboard and the network environment. See "Troubleshooting" if you have trouble during installation.
MagicTune™ allows for quick accurate tuning of the display with the ability to easily save and use monitor configurations that are best suited for you. z z z OSD mode may appear inconsistent with the explanation in guidance book depending on specification of each monitor. When Pivot is functioning, part of MagicTune™ Program may not operate normally. AutoRotation : AutoRotation will automatically pivots the monitor to 0, 90, 180degrees when you pivots the monitor.
1. 2. 3. 4. 5. 6. MagicBright™ Text: For documentations or works involving heavy text. Internet: For working with a mixture of images such as text and graphics. Game : For watching motion pictures such as a Game. Sport : For watching motion pictures such as a Sport. Movie: For watching motion pictures such as a DVD or Video CD. Custom: Although the values are carefully chosen by our engineers, the preconfigured values may not be comfortable to your eyes depending on your taste.
{ { { Especially, MagicZone is appropriate to using the moving picture. Auto Detect : If you run the Movie in some players, MagicZone will automatically get the play screen highlighted (it will be supported in players of Gom, Adrenalin, KCP, Window Media, and Power DVD etc., )Some other players also can be highlighted but could have some problems. Tusk menu Adjust the tint of the color. HUE Saturation Adjusts the color saturation. Brightness Adjusts the Brightness.
Option Tab Definition You can configure MagicTune™ using the following options. Loads the Preferences Dialog Box. Preferences in use will have an "V" in the check box. To turn on or off any Preference, position the cursor over the box and click. Preferences z z Source Select z z Enable task tray menu . - To access the MagicTune™ menus, click the icon on the [task tray menu]. The menus are not displayed if the [Enable System Tray] is deselected in [Options] ' [Basic Settings].
background pattern 2. When you detect specific color tone on "Control patch", move the control cursor toward to the direction of the color tone referring to "Color reference Circle". => Adjustment is finished properly, you won't detect any color tone on Control patch. 3. When you finish adjustment for step1,Click "Next" button . 4. Repeat 1), 2), 3) procedures for remaining step2 ~ step5. 5.
5. Click "Yes" to begin the uninstall process. 6. Wait until the "Uninstall Complete" dialog box appears. Visit the MagicTune™ website for technical support for MagicTune™, FAQs (questions and answers) and software upgrades. Overview | Installation | OSD Mode | Color Calibration | Uninstall | Troubleshooting Troubleshooting The current computing system is not compatible with MagicTune™. Please press OK and click on the "Shortcut to the MagicTune™ site" to view our home page for further reference.
For the best performance of MagicTune™, adjust to the optimal resolution. Refer to the User Guide for the optimal resolution. If you do not adjust to the optimal resolution and perform Color Calibration, the monitor cannot be adjusted to the optimal condition. Refer to the manual for the optimal resolution. This video card does not support MagicTune™. Please install a new video card driver. An error occurs when the video card driver is not installed properly.
| Overview Installation | Interface | Uninstall | Troubleshooting Overview What is MagicRotation? Traditionally, computer displays allowed the user to view only in landscape mode. In today's information age, more users need to view documents, web pages, emails, etc. in there day to day life. These types of applications can be better viewed in portrait mode where the entire contents are available on the screen.
4. When the InstallShield Wizard window appears, click "Next." 5. Select "I agree to the terms of the license agreement" to accept the terms of use. 6. Choose a folder to install the MagicRotation program.
7. Click "Install." 8. The "Installation Status" window appears. 9. Click "Finish.
Have to reboot the system in order for the MagicRotation to work properly. 10. When the installation is complete, the MagicRotation executable icon appears on your desktop. Installation Problems The installation of MagicRotation can be affected by the factors such as video card, motherboard and the network environment. See "Troubleshooting" if you have trouble during installation. Limitation 1. The "Display Driver" should be properly loaded for the MagicRotation to work properly.
OS z z z z z z Windows™ 98 SE Windows™ Me Windows™ NT 4.0 Windows™ 2000 Windows™ XP Home Edition Windows™ XP Professional Hardware z z 128MB Memory above(recommended) 25MB Free Hard disk space above Service Packs z z It is recommended that your System has the latest Service Pack installed. For Windows™ NT 4.0, it is recommended to install Internet Explorer 5.0 and above with Active Desktop component. * For more information, visit the MagicRotation website.
Rotate to 0 : Display will get rotated to 0 degree from the current angle of rotation. Rotate to 90 : Display will get rotated to 90 degree from the current angle of rotation.
Rotate to 180 : Display will get rotated to 180 degree from the current angle of rotation. Rotate to 270 : Display will get rotated to 270 degree from the current angle of rotation.
Hot key : Hot Keys are available by default and can be changed by user. It can be assigned by user directly with keyboard after changing the existing HotKey. User can create the hot key with the combination of Shift, Ctrl, Alt and general keys. In case only general key is pressed, it will be assigned in the form of Alt+general key. Help : It shows the HELP of MagicRotation program. About : It shows the version and copyright of MagicRotation program. Exit : It exits from MagicRotation program.
7. After uninstall restart the system to complete the uninstallation. Visit the MagicRotation website for technical support for MagicRotation, FAQs (questions and answers) and software upgrades. * Windows™ is registered trademark of Microsoft Corporation,Inc.
Control Buttons [MENU / ] Opens the OSD menu. Also use to exit the OSD menu or return to the previous menu. [ ] These buttons allow you to adjust items in the menu. [ ] Press this button to activate a highlighted menu item. [AUTO] When the 'AUTO' button is pressed, the Auto Adjustment screen appears as shown in the animated screen on the center.
Menu Description When the 'AUTO' button is pressed, the Auto Adjustment screen appears as shown in the animated screen on the center. The values of fine, coarse and position are adjusted automatically. AUTO To make the automatic adjustment function sharper, execute the 'AUTO' function while the AUTO PATTERN is on. If auto adjustment does not work properly, press 'AUTO' button again to adjust picture with more accuracy.
Menu Description After pushing the "MENU" button more than 5 seconds, OSD function is locked (unlocked). OSD Lock & Unlock You can also adjust the brightness and contrast of the monitor with the OSD adjustment locking feature. MagicBright™ Menu MagicBright™ Description Push the MagicBright™ button to circle through available preconfigured modes.
Brightness Menu Description Brightness When OSD is not on the screen, push the button to adjust brightness.
Menu Description You can use the on-screen menus to change the brightness according to personal preference. ( Not available in MagicColor mode of Full and Intelligent. ) Brightness Direct Access Feature : When OSD is not on the screen, push the button to adjust brightness. >> Click here to see an animation clip MENU → Contrast → , → MENU You can use the on-screen menus to change the contrast according to personal preference. ( Not available in MagicColor mode of Full and Intelligent.
Menu Description Play/Stop MagicColor is a new technology that Samsung has exclusively developed to improve digital image and to display natural color more clearly without disturbing image quality. Off Demo Returns to the original mode. The screen before applying MagicColor appears on the right and the screen after applying MagicColor appears on the left. Full Displays not only vivid natural color but also more realistic natural skin color with clearness.
Color Tone The tone of the color can be changed and one of four modes can be selected -Cool, Normal, Warm and Custom. ( Not available in MagicColor mode of Full and Intelligent. ) MENU → Color Control , → → , → → , → MENU Adjusts individual Red, Green, Blue color balance. -Red, Green, Blue ( Not available in MagicColor mode of Full and Intelligent. ) MENU → , → → , → → , → → , → MENU Gamma correction changes the luminance of the colors with intermediate luminance.
H-Position Changes the horizontal position of the monitor's entire display. MENU → V-Position , → → , → → , → MENU Changes the vertical position of the monitor's entire display. MENU → , → → , → → , → MENU OSD Menu Description You can choose one of eight languages. Language The language chosen affects only the language of the OSD. It has no effect on any software running on the computer.
MENU → , → → , → → , → MENU Setup Menu Image Reset Description Image parameters are replaced with the factory default values. MENU → Color Reset → → → , → MENU Color parameters are replaced with the factory default values.
Menu Description Shows a video source, display mode on the OSD screen.
Check List Before calling for service, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the Information section or contact your dealer. Symptom Check List Solutions No images on the screen. I cannot turn on the monitor. Is the power cord connected properly? Check the power cord connection and supply. Can you see "Check Signal Cable" on the screen? Check the signal cable connection.
Screen Display. On Screen Display (OSD) Menu to prevent changes? [MENU / ] button for at least 5 seconds. The screen shows strange colors or just black and white. Is the screen displaying only one color as if looking at the screen through a cellophane paper? Check the signal cable connection. Have the screen colors become strange after running a program or due to a crash between applications? Reboot the computer.
MagicTune™ is an additional software for the monitor. Some graphic cards may not support your monitor. When you have a problem with the graphic card, visit our website to check the compatible graphic card list provided. http://www.samsung.com/monitor/magictune MagicTune™ doesn't work properly. Have you changed your PC or video graphic card? Download the latest program. The program can be downloaded http://www.samsung.
case. Do not allow any water to go inside the monitor. Are the ultrasonic waves from the electronic pen harmful to the human body when used over a long time? Although you may hear a subtle sound, ultrasonic waves are harmless to the human body. Why are there 2 buttons emitting ultrasonic waves? Ultra waves are emitted through the 2 buttons so as to emit the waves in balance when drawing on the LCD screen with the electronic pen.
(one meter) of the monitor. Useful Tips A monitor recreates visual signals received from the computer. Therefore, if there is trouble with the computer or the video card, this can cause the monitor to become blank, have poor coloring, noise, Video mode not supported, etc. In this case, first check the source of the problem, and then contact the Service Center or your dealer.
Specifications General Model Name SyncMaster 720TD LCD Panel Size 17 " Diagonal (43 cm) Display area 337.92 mm (H) x 270.336 mm (V) Pixel Pitch 0.264 mm (H) x 0.264 mm (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 81 kHz Vertical 56 ~ 75 Hz Display Color 16.2 M Colors Resolution Optimum resolution 1280 x 1024@60 Hz Maximum resolution 1280 x 1024@75 Hz Input Signal, Terminated RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB, 0.
Signal Cable Tableau Signal Cable, Detachable, 1.8 m 15pin to 15pin D-sub cable, Detachable, 1.8 m (Option) Signal Connectors 15pin 3-row D-Sub connector, USB+DVI connector Power Consumption Less than 34 W Dimensions (W x D x H) / Weight 429.0 x 38.5 x 351.5 mm / 16.9 x 1.5 x 13.8 inch 429.0 x 225 x 424.5 mm / 16.9 x 8.9 x 16.7 inch (After installation of Stand) 429.0 x 160 x 423 mm / 16.9 x 6.3 x 16.7 inch (After folding the Stand) / 6.
Power Consumption Less than 1 W (Off-mode) Less than 34 W Less than 1 W This monitor is EPA ENERGY STAR® compliant and ENERGY2000 compliant when used with a computer equipped with VESA DPMS functionality. As an ENERGY STAR® Partner, SAMSUNG has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically.
960 VESA, 1280 x 1024 63.981 60.020 108.00 +/+ VESA, 1280 x 1024 79.976 75.025 135.00 +/+ Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called Horizontal Cycle and the inverse number of the Horizontal Cycle is called Horizontal Frequency. Unit : kHz Vertical Frequency Like a fluorescent lamp, the screen has to repeat the same image many times per second to display an image to the user.
Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. North America CANADA 1-800-SAMSUNG (7267864) http://www.samsung.com/ca MEXICO 01-800-SAMSUNG (7267864) http://www.samsung.com/mx U.S.A 1-800-SAMSUNG (7267864) http://www.samsung.com ARGENTINE 0800-333-3733 http://www.samsung.com/ar BRAZIL 0800-124-421 http://www.samsung.com/br CHILE 800-726-7864 (SAMSUNG) http://www.samsung.
CZECH REPUBLIC 844 000 844 http://www.samsung.com/cz DENMARK 38 322 887 http://www.samsung.com/dk FINLAND 09 693 79 554 http://www.samsung.com/fi FRANCE 08 25 08 65 65 (€ 0,15/min) http://www.samsung.com/fr GERMANY 01805 - 121213 (€ 0,12/Min) http://www.samsung.de HUNGARY 06 40 985 985 http://www.samsung.com/hu ITALIA 199 153 153 http://www.samsung.com/it LUXEMBURG 02 261 03 710 http://www.samsung.lu NETHERLANDS 0900 20 200 88 (€ 0.10/Min) http://www.samsung.
SOUTH AFRICA 0860 7267864 (SAMSUNG) http://www.samsung.com/za U.A.E 800SAMSUNG (7267864) http://www.samsung.com/mea Terms Dot Pitch The image on a monitor is composed of red, green and blue dots. The closer the dots, the higher the resolution. The distance between two dots of the same color is called the 'Dot Pitch'. Unit : mm Vertical Frequency The screen must be redrawn several times per second in order to create and display an image for the user.
This is not from bad quality and you can use it without uneasiness. For example, the number of TFT LCD sub pixels that is contained in this product are 3,932,160. When you clean the monitor and the panel outside, please apply the recommended small amount of cleaner by using soft and dry cloth and polish it. Let LCD area not to be forced but to be scrubbed out softly. If excessive force is applied, you can have a stain on it.