Install Drivers Install Programs SyncMaster 711MP
Notational Failure to follow directions noted by this symbol could result in bodily harm or damage to equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Grounding to prevent an electric shock Power When not used for extended period of time, set your computer to DPMS. If using a screen saver, set it to the active screen mode. Do not use a damaged or loose plug.
z This may cause an electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. z This may cause an electric shock or fire. Use only a properly grounded plug and receptacle. z An improper ground may cause electric shock or equipment damage. Insert the power plug firmly so that it does not come loose. z A bad connection may cause fire. Do not excessively bend the plug and wire nor place heavy objects upon them, which could cause damage.
z This may cause damage to the product or human body. Install the monitor base in a showcase or shelf so that the end of the base does not protrude from the showcase or shelf. z Dropping the product may cause damage to the product or personal injury. Do not place the product on the floor. z Someone, specifically children could trip over it. Do not place the product on an unstable or small surface area.
z z Installation by unqualified personnel may result in injury. Always use the mounting device specified in the owner's manual. When installing the product, make sure to keep it away from the wall (more than 10cm/4inch) for ventilation purposes. z Poor ventilation may cause an increase in the internal temperature of the product, resulting in a shortened component life and degraded performance.
Make sure to unplug the power cord before cleaning the product. z Otherwise, this may cause electric shock or fire. Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. z Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air freshener, lubricant or detergent. Contact the Service Center or Customer Center for interior cleaning once a year. z Keep the product's interior clean.
Do not try to move the monitor by pulling only the wire or the signal cable. z This may cause a breakdown, electric shock or fire due to damage to the cable. Do not move the monitor right or left by pulling only the wire or the signal cable. z This may cause a breakdown, electric shock or fire due to damage to the cable. Do not cover the vents on the monitor cabinet. z Bad ventilation may cause a breakdown or fire. Do not place water containers, chemical products or small metal objects on the monitor.
Keep the volume at a proper level when you use the headphones. z Excessively loud volume levels may damage hearing. Watching the monitor continuously at a too close angle may result in eyesight damage. To ease eye strain, take at least a five-minute break after every hour of using the monitor. Do not install the product on an unstable, uneven surface or a location prone to vibrations. z Dropping the product may cause damage to the product or personal injury.
z If swallowed, see a doctor immediately. When replacing batteries, place the batteries in the correct +/- polarity position as indicated on battery holder. z Incorrect polarity may cause a battery to break or leak and could lead to fire, injury, or contamination (damage). Use only specified standard batteries. Do not use new and used batteries together. z This may cause a battery to break or leak and could lead to fire, injury, or contamination (damage).
Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items.
Cable D-Sub Cable Power Cord Audio Cable Remote Control Batteries (AAA X 2) Connector [ For example ] Others Front 1. SOURCE 2. MagicBright [ ] 3. AUTO/EXIT 4. CH 5. VOL 6. MENU 7. Power button [ ] 8. Power indicator 9. Remote Control Sensor 10. Speaker 1. SOURCE Switches from PC mode to Video mode. Changing the source is allowed only in external devices that are connected to the monitor at the time.
To switch Screen modes: [PC] [TV] [EXT] [AV] [S-Video] >>Click here to see an animation clip For more information > Broadcasting Systems 2. MagicBright™ [ ] MagicBright™ is a new feature providing the optimum viewing environment depending on the contents of the image you are watching. Then push button again to circle through available preconfigured modes. ( Entertain Internet Text Custom ) >>Click here to see an animation clip - Available in PC Mode only 3.
(The configuration at the back of the monitor may vary from product to product.) 1. POWER Power cord, plugs into monitor and wall receptacle. This product may be used with 100 ~ 240VAC (+/- 10%). 2. PC IN Computer Connection Terminal (15 Pin D-SUB) 3. EXT(RGB) EXT(RGB) Connection Terminal - EXT(RGB) is mainly used in Europe.
4. ANT IN TV Connection Terminal For more information > Connecting TV 5. PCAUDIO IN Audio Connection Terminal 6. AV Connection Terminal 1. Headphone Connection Terminal (Output) 2. Left(L) / Right(R) audio Connection Terminal (Input) 3. Video Connection Terminal (Input) 4. S-Video Connection Terminal (Input) 7. Kensington Lock The Kensington lock is a device used to physically fix the system when using it in a public place. (The locking device has to be purchased separately.
Remote Control The performance of the remote control may be affected by a TV or other electronic devices operated near the monitor, causing malfuction due to interference with frequency. 1. POWER 2. number 3. -/-4. (Volume) 5. MUTE 6. TTX/MIX 7. MENU 8. ENTER 9. P 10. SOURCE 11. INFO 12. EXIT 13. Up-Down Left-Right Buttons 14. AUTO / PRE-CH 15. (MagicBright™) 16. DUAL l - ll 17. SLEEP 18. P.MODE 1. POWER Use this button to turn the monitor on and off. 2. number Selects TV channels in the TV mode.
Switches from PC mode to Video mode. Changing the source is allowed only in external devices that are connected to the monitor at the time. [PC] [TV] [EXT] [AV] [S-Video] 11. INFO Current picture information is displayed on the upper left corner of the screen. 12. EXIT Exits from the menu screen. 13. Up-Down Left-Right Buttons Moves from one menu item to another horizontally, vertically or adjusts selected menu values. 14. AUTO / PRE-CH PC mode : Adjusts the screen display automatically.
Connecting the Monitor 1. Connecting to a Computer 1. Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. 2. Using the D-sub (Analog) connector on the video card. Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor. 3. Connect the audio cable for your monitor to the audio port on the back of your computer. 4. Turn on both your computer and the monitor. 2.
1. Using the D-sub (Analog) connector on the video card. Connect the signal cable to the D-SUB port on the Macintosh computer. 2. For old model Macintoshes, you need to adjust the resolution control DIP switch on the Macintosh adapter (optional) referring to the switch configuration table shown on its rear. 3. Turn on the monitor and Macintosh.
2. Connect the Audio (R) and Audio (L) terminals of a DVD, VCR or Camcorders to the monitor's R and L audio input terminals using audio cables. 3. Then, start the DVD, VCR or Camcorders with a DVD disc or tape inserted. 4. Select AV or S-Video using the SOURCE button. 1-2. Connecting EXT(RGB) - It only applies to AV DEVICE that supports EXT(RGB). Connect to the DVD Devices input if the device has a EXT(RGB). You can watch DVD simply by hooking up the DVD with the monitor as long as the power is on. 1.
3. Connecting Headphone You may connect your headphones to the monitor. 1. Connect your headphones to the Headphone connection terminal. Using the Stand This monitor supports various types of VESA-standard bases. You need to either fold or remove the base in use in order to install a VESA base. 1. Folding the Base The monitor may be reclined 0 to 19 degrees.
2. Attaching the Base This monitor accepts a 75 mm x 75 mm VESA-compliant mounting interface pad. VESA stand A. Monitor B. Mounting interface pad 1. 2. 3. 4. Turn off your monitor and unplug its power cord. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen. You should fold the stand 90 degrees perfectly.
4. Click the "Install" button in the "Warning" window. 5. Monitor driver installation is completed. Windows XP/2000 1. Insert CD into the CD-ROM drive. 2. Click "Windows XP/2000 Driver" 3. Choose your monitor model in the model list, then click the "OK" button. 4. Click the "Install" button in the "Warning" window. 5. If you can see following message window, then click the "Continue Anyway" button. Then click "OK" button.
This monitor driver is under certified MS logo and this installation doesn't damage your system.The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com. 6. Monitor driver installation is completed. Windows XP | Windows 2000 |Windows Me |Windows NT | Linux Installing the Monitor Driver (Manual) When prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor.
5. Click "Update Driver.." and select "Install from a list or.." then click "Next" button. 6. Select "Don't search ,I will.." then click "Next" and then click "Have disk". 7. Click the "Browse" button then choose A:(D:\Driver) and choose your monitor model in the model list and click the "Next" button. 8. If you can see following message window, then click the "Continue Anyway" button. Then click "OK" button.
This monitor driver is under certified MS logo and this installation doesn't damage your system.The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com 9. Click the "Close" button then click "OK" button continually. 10. Monitor driver installation is completed. Microsoft® Windows® 2000 Operating System When you can see "Digital Signature Not Found" on your monitor, follow these steps. 1. Choose "OK" button on the "Insert disk" window. 2.
Microsoft® Windows® Millennium Operating System 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Click "Start" , "Setting" , "Control Panel". Double click "Display" icon. Select the "Settings" tab and click "Advanced Properties" button. Select the "Monitor" tab. Click the "Change" button in the "Monitor Type" area. Choose "Specify the location of the driver". Choose "Display a list of all the driver in a specific location.." then click "Next" button.
One of the recent problems in using a computer is that the color of the images printed out by a printer or other images scanned by a scanner or a digital camera are not the same as those shown on the monitor. The Natural Color S/W is the very solution for this problem. It is a color administration system developed by Samsung Electronics in association with Korea Electronics & Telecommunications Research Institute (ETRI).
Input Available Mode : PC : TV : Ext. : AV : S-Video OSD Description Source List Use to select PC, TV or other external input sources connected to the Monitor. Use to select the screen of your choice. - The direct button on the remote control is 'SOURCE' button. 1) PC 2) TV 3) Ext. 4) AV 5) S-Video Edit Name Name the input device connected to the input jacks to make your input source selection easier. 1) PC 2) Ext.
Picture PC Mode Available Mode OSD : PC : TV : Ext. : AV : S-Video Description MagicBright™ MagicBright™ is a new feature providing the optimum viewing environment depending on the contents of the image you are watching. Currently four different modes are available: Text, Internet, Entertain and Custom. Each mode has its own pre-configured brightness value. You can easily select one of four settings by simply pressing the MagicBright™ control button.
: Adjust the Contrast. 2) Brightness : Adjust the Brightness. If you adjust picture using Custom function, MagicBright will turn to Custom mode. Colour Tone The tone of the colour can be changed. The individual colour DTVs are also user adjustable. 1) Cool 2) Normal 3) Warm 4) Custom Colour Control Adjusts the individual R, G, B Color Controls. 1) Red 2) Green 3) Blue If you adjust picture using Colour Control function, Colour Tone will turn to Custom mode.
Available Mode : PC : TV : Ext. : AV : S-Video OSD Description Mode The Monitor has four automatic picture settings ("Dynamic", "Standard", "Movie", and "Custom") that are preset at the factory. You can activate either Dynamic, Standard, Movie, or Custom. You can select "Custom" which automatically recalls your personalized picture settings. - The direct button on the remote control is 'P.MODE' button.
Available Mode : PC : TV : Ext. : AV : S-Video OSD Description Mode The Monitor has a built-in high fidelity stereo amplifier. 1) Standard : Choose Standard for the standard factory settings. 2) Music : Choose Music when watching music videos or concerts. 3) Movie : Choose Movie when viewing movies. 4) Speech : Choose Speech when watching a show that is mostly dialogue (i.e., news). 5) Custom : Choose Custom if you want to adjust the settings according to personal preference.
Available Mode : PC : TV : Ext. : AV : S-Video OSD Description Country Select the country in which the product is being used before you use the Auto Store feature. If you do not see your country in the list, select Others. 1) Belgium 7) Sweden 2) France 8) Switzerland 3) Germany 9) United Kingdom 4) Italy 10) Others 5) Netherlands 11) CIS 6) Spain 12) E. Europe Auto Store You can scan the frequency ranges available on your television in your area and store all the channels found automatically.
Setup Available Mode : PC : TV OSD Description Language You can choose one of 9 languages. : Ext. : AV : S-Video Play / Stop Note : The language chosen affects only the language of the OSD. It has no effect on any software running on the computer. Sleep Timer Use to set the Monitor to be turned off automatically in certain minutes. 1) Off 2) 30 3) 60 4) 90 5) 120 6) 150 7) 180 - The direct button on the remote control is 'SLEEP' button.
Self-Test Feature Check Check the following items yourself before calling for service. Contact the service center for problems that you cannot solve by yourself. Self-Test Feature Check | Not Optimum Mode | Display Adapter Driver Maintenance and Cleaning | Symptoms & Recommended Actions 1. Self-Test Feature Check Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly. 1. Turn off both your computer and the monitor. 2.
Refer to Specifications > Preset Timing Modes for the resolutions or frequencies that are supported by the monitor. Contact the computer dealer or manufacturer for information on safe mode booting. 3. Display Adapter Driver Display adapter refers to the computer video card driver. If the adapter is not properly set, you cannot adjust resolution, frequency or color and you cannot install the monitor driver. 1. Checking Adapter Driver Click Start Settings Control Panel Display Settings Advanced Adapter.
The following table lists possible problems and their solutions. Before calling for service, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the Information section or contact your dealer. Installation | Screen | Audio | Remote Control 1. Problems related to Installation Problems related to the monitor installation and their solutions are listed.
Screen color is inconsistent. z Adjust color using Colour Control under OSD color adjustment menu. Color image is distorted with dark shadows. White color is poor. Power Indicator blinks green. z z The screen is blank and is blinking. z The monitor is using its power management system.
* Contact the video card manufacturer for details. How can I set the Power Saving function? z z How can I clean the outer case/LCD Panel? Windows XP : Set the resolution at the Control Panel→Appearance and Themes→Display→Screen Saver . Set the function at BIOS-SETUP of the computer. (Refer to Windows/Computer Manual). Windows ME/2000 : Set the resolution at the Control Panel→Display→Screen Saver. Set the function at BIOS-SETUP of the computer. (Refer to Windows/Computer Manual).
General General Model Name SyncMaster 711MP LCD Panel Size 17.0 inch diagonal Display area 337.92mm (H) x 270.336mm (V) Pixel Pitch 0.264mm (H) x 0.264mm (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 81kHz Vertical 56 ~ 75Hz Display Color 16.194.277 Colors Resolution Optimum resolution SXGA 1280 x 1024@60Hz Maximum resolution SXGA 1280 x 1024@75Hz Input Signal, Terminated RGB Analog, Separate H / V sync, Composite , 0.
Less than 43W Power Saving Less than 2W Dimensions (WxDxH)/ Weight 389 x 206 x 402.5 mm / 15.3 x 8.1 x 15.8 inch / 5.35 kg 389 x 63 x 386mm / 15.3 x 2.5 x 15.
Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows. Table 1. Preset Timing Modes Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.
Netherlands Austria Singapore Indonesia Australia SECAM Broadcasting Systems SECAM-B Countries SECAM-D Iran Iraq Saudi arabia Syria Lebanon Egypt SECAM-K1 Russia Hungary Bulgaria Poland SECAM-L France Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called Horizontal Cycle and the inverse number of the Horizontal Cycle is called Horizontal Frequency.
Service The address and phone number of the company can be changed without previous notice. AUSTRALIA : Samsung Electronics Australia Pty Ltd. Customer Response Centre 7 Parkview Drive, Homebush Bay NSW 2127 Tel : 1300 362 603 http://www.samsung.com.au/ BRAZIL : Samsung Eletronica da Amazonia Ltda. R. Prof. Manoelito de Ornellas, 303, Terro B Chacara Sto. Antonio, CEP : 04719-040 Sao Paulo, SP SAC : 0800 124 421 http://www.samsung.com.br/ CANADA : Samsung Electronics Canada Inc.
Ciencies, 55-65 (Poligono Pedrosa) 08908 Hospitalet de Llobregat (Barcelona) Tel. : (93) 261 67 00 Fax. : (93) 261 67 50 http://samsung.es/ FRANCE : SAMSUNG ELECTRONICS FRANCE Service Paris Nord 2 66 rue des Vanesses BP 50116 Villepinte 95950 Roissy CDG Cedex Tel : 08 25 08 65 65 Fax : 01 48 63 06 38 http://www.samsungservices.com/ GERMANY : TELEPLAN Rhein-Main GmbH Feldstr. 16 64331 Weiterstadt T. 06151/957-1306 F. 06151/957-1732 * EURO 0.12/Min http://www.samsung.
PERU : Servicio Integral Samsung Av.Argentina 1790 Lima1. Peru Tel: 51-1-336-8686 Fax: 51-1-336-8551 http://www.samsungperu.com/ PORTUGAL : SAMSUNG ELECTRONICA PORTUGUESA S.A. Rua Mário Dioniso, N o2 - 1º Drt. 2795-140 LINDA-A-VELHA Tel. 214 148 114/100 Fax. 214 148 133/128 Free Line 800 220 120 http://www.samsung.pt/ SOUTH AFRICA : Samsung Electronics,5 Libertas Road, Somerset Office Park, Bryanston Ext 16. Po Box 70006, Bryanston,2021, South Africa Tel : 0027-11-549-1621 Fax : 0027-11-549-1629 http://www.
Terms Sync Signal Sync (Synchronized) Signals refer to the standard signals that are required to display desired colors on the monitor. They are divided into Vertical and Horizontal Sync Signals. These signals display normal color images by the set resolution and frequency. Types of Sync Signals Separate This is a scheme of transmitting individual vertical and horizontal sync signals to the monitor.
CATV "CATV" refers to the broadcasting service offered at hotels, schools and other buildings through their own broadcasting system, apart from VHF or UHF broadcasting by terrestrial broadcasters. The CATV programs may include movies, entertainment and educational programs. (Different from cable TV.) CATV can be viewed only within the area in which the CATV service is offered. S-Video Short for "Super Video." S-Video allows up to 800 lines of horizontal resolution, enabling high-quality video.
For Better Display 1. Adjust computer resolution and screen injection rate (refresh rate) on computer as described below to enjoy the best quality of picture. You can have an uneven quality of picture in the screen if the best quality of picture is not provided in TFT-LCD. { { Resolution: 1280 x 1024 Vertical frequency (refresh rate): 60 Hz 2. TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth) above is used for this product.
PRODUCT INFORMATION (Image Retention Free) LCD Monitors and TVs may have image retention when switching from one image to another especially after displaying a stationary image for a long time. This guide is to demonstrate correct usage of LCD products in order to protect them from Image retention. What is Image retention ? During normal operation of a LCD panel, pixel image retention doesn't occur.
The best way to protect your monitor from Image retention is to set your PC or System to operate a Screen Saver program when you are not using it. Image retention may not occur when a LCD panel is operated under normal conditions. Normal conditions are defined as continuously changing video patterns. When the LCD panel is operated for a long time with a fixed pattern (-over 12 hours-), there may be slight difference in voltage between electrodes that work the liquid crystal (LC) in a pixel.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) - Europe only (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
