SyncMaster 17GLi 43 Cm ( 17” Diagonal ) Basic : CMG7377L User’s Manual COLOR DISPLAY UNIT
Contents of Your Package The SyncMaster 17GLi is a delicate, precision instrument. Be sure that you can comfortably lift the monitor from its package, and that you have a sturdy and stable work surface that can support the monitor. After removing the SyncMaster 17GLi from its packing, make sure you have everything you need to set up your system.
Green Series Monitor: This product is one of Samsung’s Green Series family of monitors. As such, it offers you new opportunities to cut power consumption, recycle materials and reduce the risk of health hazards. Samsung stands for quality: Samsung is one of the world’s largest manufacturers of quality monitors. At Samsung, quality control starts by checking and testing every component that goes into a SyncMaster monitor. Then, every monitor undergoes rigorous performance testing.
and return it to Samsung so that we can provide you with the best customer service possible. About This Manual This manual is designed to help you take full advantage of your color monitor’s features. It includes a Table of Contents, and is divided into the following six sections: Important: Protect your Warranty by completing and mailing the Registration Card within 10 days of purchase. Introduction provides helpful information about the User’s Manual and your Color Monitor.
a function button. The OSD shows the name, range and current setting of the control function. In addition, the OSD shows the current input signal frequency and the list of user and factory preset timings. The OSD remains active for approximately 10 seconds after completion of any adjustments. Features of Your Monitor The Color Monitor is designed for exceptional screen performance - offering a tight 0.28 mm dot-pitch for resolutions up to 1280 x 1024.
Safety Tips 1. Before connecting the AC power cord to an outlet, make sure the voltage designation on your monitor corresponds to the local electrical supply. 2. Never insert anything metallic into the monitor openings. Doing so may create the danger of electric shock. 7. Put your monitor in a location with low humidity and a minimum of dust. Avoid places like damp basements or dusty hallways. 8. Do not expose the monitor to rain or use it near water ( in kitchens, next to swimming pools, etc.).
Miniature jack AC Cord Inlet D-Sub Cable his section of the User’s Manual explains how to connect the Color Monitor to IBM or PC-compatible computers, as well as Apple Macintosh computers. To attach the monitor to this type of system, follow these instructions 1. Turn off the power to the monitor and computer. 2. Connect the 15-pin end of the signal cable to the video connector on your computer’s video controller. Tighten the screws of the signal cable to ensure proper connection.
Both configurations have a video connector ( sometimes called a video port ). If you are not sure which connector is the video connector, consult your computer or display adapter manual. 3. Connect one end of the power cord to the monitor and the other end to the power outlet. 4. Turn on the monitor and the computer.
3. Set the display mode and resolution using the DIP switches on the cable adapter. Before turning power on to the monitor and computer: Check the User’s Manual of your computer for instructions about turning on equipment connected to the computer. Also, check for any instructions concerning your video system when using a multisync monitor. In some cases, jumper or switch settings may be required for the display adapter to output extended resolution modes.
6. Connect one end of the power cord to the monitor and other end to the power outlet. 7 . Power on your monitor and Macintosh computer. If you see any message on your monitor screen, installation is done. If you do not see any messages, check each of your connections and DIP switch settings and reboot your system. 8. If you need more information, please refer to the MacMaster Cable Adapter User’s Manual.
Front View 1. Power Button 2 . Power Indicator ( Dual Color ) 3. Contrast Control 4. Brightness Control Control Panel Press the center of the control panel to gain access to these controls. 6. Position (H/V)/ user or preset mode 8. G/D 7. Size(H/V) /Information 9. Color Temp 5. Adjustment Control 9 ENGLISH 11.Degauss 10.
his section of the User’s Manual shows you the location of each front panel control explains their functions, and provides examples that illustrate how to properly adjust these controls. 5.OE-c Adjustment Controls Use these buttons to adjust the display image. While implementing control functions the indicator’s color is orange. However, you cannot adjust the display image while a control function is disabled (the indicator’s color is green ). Controls and Their Locations Push the up or right ( .
On Screen Display 6. @ Position ( H/V )/ User or Preset Mode The monitor features an On Screen Display ( OSD ) that shows information about the display settings. The OSD appears on the screen when you select a function button. The OSD shows the name, range and current setting of the control function. First Function : Position (H/V) Push this button once to adjust the horizontal and vertical position (centering) of the display.
8.0 G /D ( Geometric Distortion ) 10. - Recall First Function : Pincushion / Trapezoid Push this button once to adjust the pincushion and trapezoid of the display. l Pincushion control Push G / D button once to display the pincushion OSD. To adjust the vertical sides of the display from bowing in ( pincushion ) or bowing out ( barrel distortion ), use the left and right (b) buttons until the sides are straight. l Trapezoid control Push G / D button once to display the pincushion OSD.
Examples of OSD 13 ENGLISH
Power Management System The PowerSaver runs in four operational states: On, Stand-by, Suspend and Off. The modes of operation and time limits are set through a software utility which comes with your video card. See table below for further details. This monitor features a built-in power management system - called PowerSaver - which operates with your computer’s video card. To take advantage of the PowerSaver feature you must use a VESA DPMS compliant video card.
The following chart provides an illustrated reference guide for adjusting the picture of your monitor’s display. Adjustment Examples Condition Control Usage instruction Picture is too wide. Push the Size ( H / V ) button once. Push the left button (4) to decrease the Horizontal Size. Picture is too narrow. Push the Size ( H / V ) button once. Push the right button IF) to increase the Horizontal Size. Picture is too large vertically. Push the Size ( H / V ) button once.
Condition Control Usage Instruction Vertical sides are not straight. ( bowing out ) Push the G/D button once. Push the left button (4 ) to straighten the sides. Vertical sides are not straight. ( bowing in ) Push the G / D button once. Push the right button ( F) to straighten the sides. Bottom size is too large. Push the G/D button once. Push the down button ( r) to make a rectangle. Bottom size is too small. Push the G / D button once. Push the up button [A) to make a rectangle.
his section of the User’s Manual offers a handy chart that may be used to quickly correct problems with the monitor, should any occur. PROBLEM There is no screen image l l l l l l Image is too dark or too bright Image is too large or too small LED color is: orange blinking orange-green blinking on-off orange Colors are not uniform ( there are dark or shadow areas ) Check Signal Cable message. Before calling an authorized service center, please check this troubleshooting chart.
his section of the User’s Manual contains important reference information such as the monitor’s Specifications ( page 18 ) important FCC and IC operating information ( page 19, 20 ), D-SUB connectors ( page 20 ), plus timing settings that have been preset by the factory ( page 21 and 22 ).
User Information FCC Information Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. User Instructions The Federal Communications Commission Radio Frequency Interference Statement includes the following warning : Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
IC Compliance Notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations of ICES-003. Cet appareil numérique de la Classe B respecte toutes les exigences du Règlement ICES-003 sur le Materiel brouilleur du Canada. Pin Assignments Sync 15 Pin Side of the Signal Cable Cable Adapter (Figure 1) Pin No.
Factory Modes Timing Signal Chart Mode IBM VESA VGA1/7OHz VGA2/70Hz VGA3/60Hz 640/72Hz Timing 640X350 720X400 640X480 640X480 fH (kHz) 31.469 31.469 31.469 37.861 A psec 31.778 31.777 31.778 26.413 B psec 3.813 3.813 3.813 1.270 C psec 1.907 1.907 1.907 4.064 D psec 25.422 25.422 25.422 20.317 E ,usec 0.636 0.636 0.636 0.762 fv (Hz) 70.086 70.087 59.940 72.809 0 msec 14.268 14.268 16.683 13.735 P msec 0.064 0.064 0.064 0.079 Q msec 1.907 1.080 1.048 0.739 R msec 11.122 12.711 15.253 12.678 S msec 1.
Factory Modes Timing Signal Chart Mode. VESA 1024/60Hz SIGMA Apple Mac. 640X480 1280/60Hz 1280X1024 832/75Hz 832X624 60.023 61.275 63.953 16.660 1.219 16.320 15.636 49.726 20.110 2.235 0.800 2.400 1.018 2.255 1.117 3.910 15.754 0.369 13.003 0.203 12.800 0.320 11.636 0.727 14.524 0.559 fv (Hz) 0 msec 60.004 75.029 120.619 59.938 74.551 16.666 13.328 8.291 16.684 13.414 P msec 0.124 0.050 0.131 Q msec R msec 0.600 15.880 0.466 12.795 0.310 0.078 0.579 0.060 0.
VCCI Information PLUG AND PLAY This equipment is in the 2nd Class category ( information equipment to be used in a residential area or an adjacent area thereto ) and conforms to the standards set by the Voluntary Control Council For Interference by Data Processing Equipment and Electronic Office Machines aimed at preventing radio interference in such residential area. When used near a radio or TV receiver, it may become the cause of radio interference. Read the instructions for correct handling.
ENGLISH 24
U.S.A. : SAMSUNG ELECTRONICS AMERICA (SEA) ONE SAMSUNG PLACE LEDGEWOOD NJ 07852 Tel. : 1-800-SAMSUNG (1-800-726-7864) Fax-on-Demand for product information : 1-800-229-2239 SPAIN : SAMSUNG ELECTRÓNICA COMERCIAL IBÉRICA, S.A. Ciencies, 55-65 (Polígono Pedrosa) 08908 HOSPITALET DE LLOBREGAT (Barcelona) Tel. : (93) 261-6700 Fax. : (93) 261 67 55 CANADA : SAMSUNG ELECTRONICS CANADA INC. 7037 Financial Drive Mississauga Ontario L5N 6R3 Tel. : 1-800-SAMSUNG (1-800-726-7864) Fax.
