User guide

3.2 Data Transmission Mode

Press to open the Setup screen, and go to Network.

Select User Name and enter a name.

Set Network Preference to SIP.

Select SIP Settings.

a) Set SIP Proxy Server to On.

b) Fill the Display Name, Server Address, and Password ﬁelds.

Select OK to save the new settings.

H.323 and SIP modes cannot be used at the same time. To change the

current H.323 mode to SIP, set Network Preference to SIP.

indicates that the LAN cable is not connected. Correct the LAN cable

connection if this symbol appears at the top right corner of the screen.

indicates that an IP address conﬂict has occurred. Change the IP ad-

dress if this symbol appears at the top right corner of the screen.

◀ 19 ▶