SW80USP SW65USP Washing Machine user manual imagine the possibilities Thank you for purchasing a Samsung product. To receive a more complete service, please register your product at www.samsung.com/global/register SW80USPIW-02444N_EN(ÀÓ½Ã).
features Water Saving course Designed to address concerns on water consumption. Less water is used per wash, while continuing to deliver a clean and effective washing performance. It has been certified from WELS(Water Efficiency Labelling and Standards) of Australia.
safety instructions Please note that the following precautions for safety intend to prevent unpredictable danger and damage by helping the proper use in safety. When using hot water in washing, please make sure that the water should not exceed 50°C. • Plastic parts may be deformed or damaged, and an electric shock or a fire may take place. WARNING There might be serious injury or fatal accident when you violate this instruction.
safety instructions CAUTIONS There might be a slight injury or damage when you violate this instruction. • Don’t install it in the area with moisture or outdoor where it has rain or snow. − An electric shock or a fire may take place. • Please unplug the power supply cord when you do not use it. − An electric shock or a fire may take place. • If there is dust or water on the power supply plug and its connected part, please remove it completely. − An electric shock or a fire may take place.
contents SETTING UP YOUR WASHER 10 Description of part Checking before washing and caring for garments How to wash automatically depends on the laundry Control Panel MANUAL FUNCTIONS 15 Manual functions INSTALLATION & MAINTENANCE 16 16 16 18 18 19 19 19 20 20 20 Environment Levelling Connecting the water supply hose Assembling the rat protection panel How to connect the drain hose How to put the detergent in How to add the fabric softener Water supply connector filter Cleaning the filter How to clea
setting up your washer DESCRIPTION OF PART The User’s Manual is for common use. Make use of the User’s Manual depending upon your washing machine model. Lid Be sure to keep the lid closed during washing and spinning. Filter Water supply hose (Hot) Silver wash Water supply hose (Cold) Drain hose (Pump) Lint will be collected in the filter during washing.
CHECKING BEFORE WASHING AND CARING FOR GARMENTS Must follow the checkpoints in order to avoid machine problems or damages on garments. • If the below problems are caused by customer’s faults, separate service fee will be charged. Checkpoints Before Starting Washing Not washable laundry Clothes those are easily transformable even by soaking in water.
setting up your washer CARING FOR CLOTHES BEFORE WASHING Take out personal belongings from pockets. • Caution, Check the pockets! Hairpins and coins cause damages to clothes and washing machine. They make noise and problems to the machine. Must check the pocket. If pants zippers are open while washing, the spin basket may be damaged. The zipper should be closed and fixed with a string before washing. • Metal on the clothing may cause damage to the clothes and the tub.
HOW TO WASH AUTOMATICALLY DEPENDS ON THE LAUNDRY Before starting washing, check the following; • Connect the water supply hose to the water tap. Leave a tap open. Plug the power cord in. Make sure to lay down the drain hose.
setting up your washer CONTROL PANEL For more details, see control panel of your washing machine. 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 POWER BUTTON Press this button once to operate. Press it again to turn the power off. 2 MEMORY BUTTON Press this button once to operate. Manually select the functions to use. (Course, Silver wash, Air Turbo, Rinse count) Your choices are automatically saved when pressing the Start/Hold button.
REMAINING TIME, DELAY START TIME, ERROR DISPLAY Displays the remaining wash time. Displays the reserved delay start time. Displays the error state if a problem occurs in the washing machine so that you can take action. 11 SOAK BUTTON Press this button to perform a soak wash. This function cannot be selected during a Delicate course. Soaking is automatically applied during a Clean tub course. You can set the soak time from between 10 to 60 minutes.
setting up your washer FUZZY COURSE Selects the best washing course automatically. 1. Press the Power Button to “On”. 2. Press the Start/Hold button. Water level is selected automatically. Washing rinsing, and spinning follow. If you want to pause, press the Start/Hold button again. You can change the course when paused. 3. Close the lid. • Select the Silver wash button to perform anti-bacteria washing. QUICK COURSE If you want to wash those frequently used towels or less dirty laundry time.
WATER SAVING COURSE EASY COURSE If you choose EASY, you will enjoy full access to all of Samsung Washing Machine’s userfriendly functions at your fingertips. When selecting this course, Air Turbo, Silver wash and Mist Shower are selected automatically. 1. Press the Power button to “On”. 2. Press the Course select button four times. 3. Press the Start/Hold button. Water level is selected automatically. Washing rinsing, and spinning follow. If you want to pause, press the Start/Hold button again.
setting up your washer BLANKET COURSE (Big volume laundry like blanket and bed cover sheets) 1. Press the Power button to “On”. 2. Press the Course select button seven times. 3. Press the Start/Hold button. Water level is selected automatically. Washing, rinsing, and spinning follow. If you want to pause, press the Start/Hold button again. You can change the course when paused. 4. Close the lid.
manual functions Possible to select the function for each course. (Example) For a simple washing as the little dirt course : Power Select the little dirt course Wash Start/Hold RINSE ONLY Press the Rinse button. Press the Start/Hold button. Rinsing goes on for 2 times. When the Rinse button is pressed during rinsing, the rinse times can be changed to between 2 to 5 times in duration. Manual functions 02 MANUAL FUNCTIONS WASH ONLY Press the Power button. Press the Wash button.
installation & maintenance The User’s Manual is for common use. Make use of the User’s Manual depending upon your washing machine model. ENVIRONMENT Leave some space Maintain at least 10cm between the washer and the wall. Place the washer on a sturdy flat surface. If the washer is placed on an uneven or weak surface, noise or vibration occurs. (Allowable is 1˚) Adjust the legs for even placement. Never install the washer near water.
1. Remove the adaptor from the water supply hose. 3. Connect adaptor to the water tap by tightening the screws firmly. Then, turn part(b) following the arrow and put (a) and (b) together. 03 Installation & maintenance 2. First, using a “+” type screw driver, loosen the four screws on the adaptor. Next, take the adaptor and turn part(b) following the arrow for gap about 5 mm between them. a b 4. Connect the water supply hose to the adaptor. Pull down the part (c) of the water supply hose.
installation & maintenance ASSEMBLING THE RAT PROTECTION PANEL 1. It is easier engaging the shutter when the set is lifted up a little, as shown in the figure below. 2. Insert the shutter completely through the engagement hole from the back. HOW TO CONNECT THE DRAIN HOSE • Attach the drain hose to the rear of the washer. Install the clamp on the drain hose and tighten to prevent leakage of water. • Install the drain hose in the position of about 90~100cm above the ground.
HOW TO PUT THE DETERGENT IN 1. Open the detergent box by pulling in the direction of the arrow as shown in the figure and then put the powder detergent in the detergent box. 2. Put in one-time amount of detergent evenly so the detergent may not brim over the box. Slide and open the cover in the direction of the arrow, insert the rinse detergent, and slide and close it in the reverse direction.
installation & maintenance CLEANING THE FILTER Clean the filter net often to keep the washer clean. 1. Push the upper part of the Magic filter and pull in. 2. Open the cover as shown in the figure. 3. Clean the Magic filter. 4. Close the cover and insert the lower part of the filter in the basket first and then push the filter with “click” sound. HOW TO CLEAN THE PUMP FILTER 1. Place a rag under the washer filter not to wet the floor. 2. Rotate the filter counterclockwise and pull out the filter. 3.
troubleshooting CHECK Washing machine won’t work - Is the water tap opened? - Is the washer plugged in? - Is the power cut off? - Is there enough water? Water dose not drain - Is the drain hose down?(No pump) - Is the drain hose frozen? - Is the drain hose clogged? - If the water dose not drain, a buzzer will sound, and the remaining time indicator will show “5E”.
washing machine won’t work? PROBLEM CHECK & SOLUTION The power is cut off. Is the electric voltage normal? Is the washer plugged in? Plug in the electric cord. Water does not drain. Is the drain hose down? Put the drain hose down. Is the drain hose folded? Unfold the drain hose. Is the drain hose outlet clogged? Remove the waste cleanly. Washing machine won’t work. Is the washer lid open? Close the lid.
PROBLEM CHECK The water leaks at the water supply hose connector. Did you press the Start/Hold button after selecting the water supply? If the Start/Hold button is not pressed, water is not supplied. Press the Start/Hold button. Is the filter net at the water supply hose connector clogged with dirty matters? Clean the filter net by brushing with a toothbrush. Is the water supply cut off? If the water supply is suspended, turn off the faucet and power off. Spinning makes loud noises and vibrations.
QUESTIONS OR COMMENTS? Country CALL AUSTRALIA 1300 362 603 OR VISIT US ONLINE AT www.samsung.com Code No. DC68-02444N_EN SW80USPIW-02444N_EN(ÀÓ½Ã).
