Security Camera User Manual

COLOR DOME CAMERA User Guide
20
COLOR DOME CAMERA User Guide
21
MAIN SETUP
SSDR OFF
WHITE BAL ATW
BACKLIGHT OFF
MOTION DET
OFF
Operating Your Camera
•Foreffective viewingoflicenseplates,thereisaminimumrequiredilluminationand
theshutterspeedneedstobefasterthan1/200sec.
•BecausetherecanbeadifferenceintheeffectivenessofHLCaccordingtothe
amount of light area in the screen,optimize the installation angle for the best HLC
performance.
•Whendark,theHLCisonlyactivatedwhenabrightlightexceedingaspecificsize.(In
NIGHTONLYmode.)
•TheHLCisnotactivatedindaylightor when bright lightisnotpresentatnight.(In
NIGHTONLYmode.)
•TheHLCisnotactivatedwhentheD-ZOOMmodeis'ON'orDISmodeis'ON'.
Notes
3.SelectadesiredmodeusingtheFunctionSetupswitchandpresstheFunctionSetupswitch.

•Select‘BLC’toadjusttheareatobe
enhanced then adjust the level.
•HLC:Enabletheusertochangethelevel,
mask tone area.

HLC(HighLightCompensation):
If the scene contains extremely bright light areas such as; from car headlight, the light
can mask out much of the on-screen detail.
  -LEVEL:AdjustleveloftheHLCfunction.(LOW,MIDDLE,HIGH)
- MASK TONE : Change the brightness
- LIMIT : Enable to change the operating condition.
2. Select a desired mode using the Function Setup.
OFF : Not being used

BLC:Enablesausertodirectlyselectadesiredareafromapicture,andtoviewthe
area more clearly.
BACKLIGHT
Unlike conventional cameras, the SVD-4700 is designed to deliver a distinctive subject and
background at the same time, even when the subject is backlight, by using the features of the
proprietary W-V DSP chip.
1.WhentheSETUPmenuscreenisdisplayed,select‘BACKLIGHT’byusingtheFunctionSetup
switchsothatthearrowindicates‘BACKLIGHT’.