High Strength 10X Zoom High-Resolution 10X Vandal-Proof Dome Camera SVD-4300 User’s Manual SALES NETWORK • SAMSUNG TECHWIN CO., LTD. 145-3, Sangdaewon 1-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do 462-703, Korea TEL : +82-31-740-8137~8139 FAX : +82-31-740-8145 • SAMSUNG OPTO-ELECTRONICS UK, LTD. Samsung House, 1000 Hillswood Drive, Hillswood Business Park Chertsey, Surrey KT16 OPS TEL : +44-1932-45-5308 FAX : +44-1932-45-5325 www.samsungtechwin.com www.samsungcctv.
Before operating the camera, confirm the camera model and proper input power voltage. In order to that you can understand this manual thoroughly, we'll introduce our model description.
Features A/F 10x Optical Zoom Day & Night The built-in SVD-4300 optical zoom lens is a highly durable component. It features auto focus, auto iris, and zoom functions. The camera automatically determines whether it is night time or day time, selecting operating mode automatically. The camera operates in color mode during day light conditions and BW mode in night conditions for clearer identification.
Contents Precautions 8 Components and Accessories 10 Overview 11 • CAM TITLE 18 • WHITE BALANCE 21 • BACKLIGHT 22 23 24 • MOTION DETECTION • FOCUS • EXPOSURE • SPECIAL • RESET Connection Connecting To Monitor Connecting To Power RS-485 communication control Operating Your Camera Menu Configuration Menu Setup 13 • EXIT 28 33 38 38 13 14 15 16 16 17 Troubleshooting 39 Specification 40 Dimension 42
Precautions Do not install the camera in extreme temperature conditions. Do not install or use the camera in an environment where the humidity is high. Only use the camera under conditions where temperatures are between -10˚C and +50˚C. Be especially careful to provide ventilation when operating under high temperatures. It can cause the image quality to be poor. Do not drop the camera or subject them to physical shocks. It can cause malfunctions to occur.
Components and Accessories Overview 1. SVD-4300 2. Instruction Manual 3. Quick Install Guide 4. Wrench 5. Ø5 Tapping Screws 4EA 6. Template 7.
Overview Connection Pan Base control panning angle of camera Rotate Base Holding Screw fix rotated position Rotate Base control rotating angle of camera Pan Base Holding Screws (Color : Silver) fix panned position Auto Focus 10x Zoom Lens Module. SET button To access the main setup menu. Pressing the “SET” button locks the zoom control functions of these buttons and prompts the main setup menu. AF button To activate auto focus just once. UP (WIDE button) To move the arrow indicator to up.
Connection Connecting to Power RS-485 communication control Use AC 24V / 300mA or DC 12V / 500mA power source. Connecting to RS-485 Control Cable CONTROL CABLE RED (TRX+) WHITE(TRX-) Using a RS-485 communication, it will be able to control the ZOOM/FOCUS and OSD menu at the SAMSUNG TECHWIN System Controller or DVR.
Operating Your Camera Menu Configuration Menu Setup Use the six buttons on back of the camera.
Operating Your Camera Select feature using the UP or DOWN button. 3. Press SET button. MAIN SETUP CAM TITLE OFF WHIET BAL ATW BACKLIGHT OFF MOTION DET OFF FOCUS EXPOSURE SPECIAL RESET EXIT Change the status using the LEFT or RIGHT button. 3. Change the status of the selected feature using the LEFT or RIGHT button. 4. When completed, move the arrow indicator to 'EXIT' and press the SET button. Notes • Features marked with a have an accessible submenu. • Access the submenu by pressing the SET button. 4.
Operating Your Camera 5. Select on screen position of the CAM TITLE. Move the cursor to 'POS' and press SET button. WHITE BALANCE CONTROL Your camera provides three 'WHITE BAL' control modes for your choosing in adjusting the white balance. 1. Press the SET button to access the main setup menu and move the indicator to 'WHITE BAL' using the UP or DOWN button. 2. Set 'WHITE BAL' using the LEFT or RIGHT button. The CAM TITLE is displayed on the top-left of the monitor screen.
Operating Your Camera Notes MOTION DETECTION • Proper White Balance may not be obtained under the following conditions. When the scene contains mostly high color temperature object, such as a blue sky or sunset. When the scene is dim. If your camera directly faces a fluorescent lamp or is used in an environment of varying lighting conditions.
Operating Your Camera FOCUS MAIN SETUP CAM TITLE OFF WHIET BAL ATW BACKLIGHT OFF MOTION DET OFF FOCUS EXPOSURE SPECIAL 1. Press the SET button to access the main setup manu and then position the indicator over FOCUS using the UP or DOWN button. 2. Press the SET button. MODE: You can select the most suitable zoom mode. Move the arrow indicator to ‘MODE’ using UP or DOWN button.
Operating Your Camera •FAST: To move zoom fast. •SLOW: To move zoom slowly. Notes ZOOM POS INIT: Configure zoom position using this feature. Position the indicator ove 'ZOOM POS INIT' using the LEFT or RIGHT button. FOCUS SETUP • The 'ZOOM SPEED' mode cannot be used if 'MODE' is set to 'AUTO' and 'ZOOM TRK' is 'ON'. MODE ZOOM TRK ZOOM SPEED D-ZOOM DISP ZOOM MAG ZOOM POS INIT LENS INIT D-ZOOM: Configure magnification limit from x2~x10 using this feature.
Operating Your Camera EXPOSURE EXPOSURE SETUP BRIGHTNESS IRIS SHUTTER AGC SSNR SENS-UP END 25....... AUTO --NORMAL LOW OFF IRIS: Set 'IRIS' to 'AUTO' or 'MANUAL'. Position the indicator over 'IRIS' using the UP or DOWN button and then select the desired iris mode using the LEFT or RIGHT button. EXPOSURE SETUP BRIGHTNESS IRIS SHUTTER AGC 25....... AUTO --NORMAL •AUTO: The iris is automatically activated upon illumination. •MANUAL: Manual iris configuration.
Operating Your Camera •A.FLK (NTSC: 1/100, PAL: 1/120): Flicker-free mode •ESC: Automatic shutter speed setting (optimal) •MANUAL: Manual shutter speed setting 2. If you choose ‘MANUAL’, select the optimal shutter speed. · In MANUAL mode, the optimal shutter speed needs to be designated. Select from 1/60 to 1/120,000 (NTSC) or from 1/50 to 1/120,000 (PAL). * 'Sens-Up' mode can be configured manually (2x to 128x). · Verify changes made to the shutter speed by referencing to changes in on screen brightness.
Operating Your Camera Notes SPECIAL • Changing 'AGC' setting from NORMAL to HIGH results in greater sensitivity, as well as on screen noise. • Setting 'AGC' to OFF locks 'SSNR' configuration. SENS-UP : This feature ensures clear images at night or under low lighting conditions. 1. Position the indicator over 'SENS-UP' using the UP or DOWN button. 2. Set 'SENS-UP' to the desired mode using the LEFT or RIGHT button. •AUTO : Select this mode for use in night time or under low lighting conditions.
Operating Your Camera •PRESET NO : Up to eight different preset configurations are supported. USER PRESET SETUP PRESET NO. NO. 1 PRESET MODE OFF PRESET SAVE PRESET CLEAR END PRESET DEFINED •PRESET MODE: Configure initial settings under FOCUS, EXPOSURE, etc. •PRESET CLEAR: Clear configured preset. USER PRESET SETUP PRESET NO. NO. 1 PRESET MODE OFF PRESET SAVE PRESET CLEAR END PRESET DEFINED •END: Revert to the SPECIAL SETUP menu. USER PRESET SETUP PRESET NO. NO.
Operating Your Camera •GROUP SEL : Choose up to eight groups. Each group can consist of four mask areas. •AREA SEL : Configure eight mask areas. •AREA MODE : Mask area display. •MASK TONE : Adjust desired mask color level. •TOP : To move the mask area up. •BOTTOM : To move the mask area down. •LEFT : To move the mask area left. •RIGHT : To move the mask area right. SYNC : Two synchronization modes are available INTERNAL and EXTERNAL LINE-LOCK.
Operating Your Camera •CAM ID : Assign ID number to the camera. It is restricted available to set ID from 1 to 255. •DISP CAM ID: Displays camera ID on top left corner of the screen. •BAUD RATE : Configure baud rate from 9600, 19200, 38400, 57600bps. •UART MODE : Configure parity bit to NONE, EVEN, or ODD. Data bit is set to 8bit, and stop bit to 1bit. Set the UART MODE to EVEN if using the Remote Controller. •RET PKT : Used to transfer a packet.
Specifications SVD-4300N P O W E R C C D O P T I C S S y n c. E L E C. Input Voltage Input Current Power Consumption Size Total Pixels Effective Pixels Optics Min. Focus Distance D. ZOOM Angle Field of view Scanning System Synchronization Frequency Resolution Video Output S/N (Y signal) Min. Illumination Backlight Compensation Day & Night Gain Control White Balance Electronic shutter speed O.S.
DECLARATION OF CONFORMITY Dimension Application of Council Directive(s) Ø 148mm 89 / 336 / EEC Manufacturer's Name SAMSUNG TECHWIN CO., LTD Manufacturer's Address SAMSUNG TECHWIN CO., LTD 42, SUNGJU-DONG CHANGWON-CITY, KYUNGNAM, KOREA, 641-716 European Representative Name European Representative Address 126mm Equipment Type/Environment CCTV Camera Model Name SVD-4300P Beginning Serial NO. S6700001 Year of Manufacture 2006. 7.
