User guide

COLOR CCD CAMERA User Guide
26
COLOR CCD CAMERA User Guide
27
Operating Your Camera
This function reduces the background noise in a low luminance environment.
1. When the SETUP menu screen is displayed, select ‘SSNR3’ by using the Function Setup switch
so that the arrow indicates ‘SSNR3’.
2. Select a desired mode using the Function Setup switch.

ON : Activates SSNR3 so that noise is reduced.

OFF : Deactivates SSNR3. Noise is not reduced.
SSNR3
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
4.SSDR
OFF
5.BACKLIGHT OFF
6.SSNR3 ON
3. Set the SSNR3 mode to ‘ON’ and press the Function Setup switch. Then you can adjust the
noise reduction level.
•YoucannotsettheSSNR3to‘ON’or‘OFF’whentheAGCmodeofthe'EXPOSURE'menu
is‘OFF’.
•WhenadjustingthenoisereductionlevelintheSSNR3mode,rememberthatthehigher
the level set, the more the noise level will be reduced, as will the brightness of the image.
Notes
•WhenusingaVideoAutoIrisLens,ifyousetthelensleveltolow,automaticswitching
betweenColorandBlack&Whitemaynotoccur.
•WhenAGCintheEXPOSUREmenuis'OFF','---'modeoperatesasselecting'AUTO'mode
cannot be selected.
Notes
You can display pictures in color or in black and white.
1. When the SETUP menu screen is displayed, select ‘DAY/NIGHT’ by using the Function
Setup switch so that the arrow indicates ‘DAY/NIGHT’.
DAY/NIGHT
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
4.SSDR
OFF
5.BACKLIGHT OFF
6.SSNR3 ON
7.DAY/NIGHT COLOR
2. Select a desired mode using the Function Setup switch according to the picture display you want.

COLOR : The picture is always displayed in color.

B/W : The picture is always displayed in black and white.
You can turn on or off the burst signal on B/W mode.

AUTO : The mode is switched to ’Color‘ in a normal
environment, but switches to ’B/W‘ mode
when ambient illumination is low. To set up
the switching time for AUTO mode, press the
Function Setup switch.
You can turn on or off the burst signal on
B/W mode.
- DWELL TIME : You can select day/night switching delay
time from. 
5s, 7s, 10s, 15s, 20s, 30s, 40, 60s