User guide

COLOR CCD CAMERA User Guide
20
COLOR CCD CAMERA User Guide
21
Manual : Select Manual Lens
• WhenusingVIDEOlens,adjustthelensVR explained belowfirstandset the focususing
'FOCUSADJ'menu.
• IfcolorrollingoccurswhenusingaDClens,setShutterto---.
• Somelensesmaynotworkproperly,dependingonthesettingoftheBRIGHTNESSLEVEL.
•WhenUsingaVideo-TypeAutoIrisLens
❶ AdjusttheALCadjustmentterminalonthelensappropriately.Ingeneral,setittoAV
(Average).
2Itmaynotworkproperlydependingontheinstalledlens.SettheLevelVRofthelens
to the optimal value.
3SetAGCtoOFFandadjusttheLensVRtoanappropriatebrightness.
4AdjusttheLensVR,adjusttheBRIGHTNESS,andthencheckifthescreenbrightness
changesproperly.Otherwise,adjusttheLensVRagain.
Notes
3. Each Lens mode has sub menu site as listed below.
- Brightness (DC, Manual) : Adjusts the video brightness.
- Level (VIDEO) : Adjusts the level of video iris signals; the higher the level,
the brighter the video looks.
- FOCUS ADJ (DC, VIDEO) : To adjust the DC and VIDEO lens focus correctly, you must
activate the Focus Settings mode under each lens menu. To
activate the Focus Settings mode, adjust the lens focus, and
then deactivate the settings mode. (The VIDEO lens requires
an extra step: go to the sub menu of the Focus Settings
mode and change the shutter speed to adjust the lens
brightness.)
- IRIS SPEED (DC) : Adjusts the Iris control speed of the DC lens. If the control speed
is too slow or fast, please use this menu to adjust the speed.
MAIN SETUP
1.LENS DC
2.EXPOSURE
EXPOSURE
1. When the SETUP menu screen is displayed, select 'EXPOSURE’ by using the Function
Setup switch so that the arrow indicates 'EXPOSURE’.
2. Select a desired mode using the Function Setup switch.
EXPOSURE SETUP
1.BRIGHTNESS 25
2.SHUTTER ESC
3.AGC HIGH
4.SENS-UP OFF
5.RETURN
Operating Your Camera
•WhenyouuseaDClens,settheshuttermodeto---ifcolorrollingoccurs.
•When the SHUTTER is set to ESC after selecting the Internal SynchronizationType,the
picture may become unstable if the camera faces a bright fluorescent light. Therefore,
take care when choosing the installation position.
•WhentheSHUTTERissettoMANUALorA.FLKmode,SENS-UPwillbedisabled.
Notes
SHUTTER : You can select the shutter.
- ESC : Select this to control the shutter speed automatically. If ESC is selected,
the shutter speed is automatically controlled depending on the ambient
illumination of the subject.
- MANUAL : You can control shutter speed manually.
(NTSC MODEL : 1/60sec~1/120,000sec, PAL MODEL : 1/50sec~1/120,000sec)
- A.FLK : Select this when you experience picture flicker, this happen when there
is a clash with the installed lighting frequency.
- --- : Shutter speed is fixed at 1/60sec(1/50sec).

DC/Video : Select Auto Iris Lens.
You can adjust the minimum shutter and maximum value of ESC shutter
mode when DC Lens mode is selected.