Specifications

CHAPTER 4. Business Feature Package

4-38

 Last Number - The most recently dialed number on a C.O. line is saved and may be

redialed by pressing the redial key or dialing the LNR access code.

 Manual Retry with LNR - When you make an outside call and receive a busy signal

you can press the LNR key to redial the same number again. This operation can be

manually repeated for a limited number of attempts as defined by system

programming(available to keyset users only).

 Memo Redial - When you are calling directory assistance you can store the number

you are given using the dial pad and SAVE number feature. There is no need for a

pencil and paper(available to phone users only).

 Save Number - Any number dialed on a C.O. line may be saved for redial at a later

time.

4.2.1.37 Remote Hold

When you wish to place a call on hold at another station, press TRSF and dial the station

number(or press the appropriate DSS key). Press the HOLD key. This will place the call on

system hold on an available CALL button or Line Key at the remote station.

4.2.1.38 Ring Modes

Each keyset user can select one of three distinct ways to receive intercom calls. The phone

can automatically answer on the speakerphone, voice announce through the speaker or

receive ringing. When the ring mode is selected, keyset users can choose one of eight

distinct ring tones. Forced Auto Answer is invoked by the calling station and is controlled

by the calling station’s class of service.

4.2.1.39 Ringing Preference

Lifting the handset or pressing the speaker button automatically answers a call ringing at

the keyset. Using this method, users are assured of answering the oldest call first.

When ringing preference is turned off, the user must press the flashing button to answer.

Users may answer ringing lines in any order by pressing the flashing button.

4.2.1.40 Speakerphone

DCS LCD 24B and DCS LCD 12B keysets have built-in speakerphone. The speakerphone

enables calls to be made and received without the use of the handset. All iDCS keysets are

speakerphones. The iDCS 28 Button and the iDCS 18 Button can have a Full Duplex

Speakerphone Module added.

4.2.1.41 Station Lock

With a programmable personal station passcode, any keyset or single line station can be locked

and unlocked to control use of each telephone. There are two lock options: 1=LOCKED

OUTGOING and 2=LOCKED ALL CALLS. See the following table for more details.