Specifications

OfficeServ 100 General Description Guide/Ed.00

4.2.1.31 Programmable Keys

LCD 24B and STD 24B keysets have 24 programmable keys, LCD 12B and Basic 12B

keysets have 12, and 7B keysets have 12. Each key can be programmed for more than 25

different uses to personalize each phone. Examples of keys include individual outside line,

individual station, group of lines, group of stations and one touch speed dial buttons.

Using these keys eliminates dialing access codes.

The following feature keys have extenders that make them more specific: SPEED DIAL,

SUPERVISOR, PAGE, DSS, DIRECTED PICKUP, GROUP PICKUP, DOOR PHONE,

BOSS, PROGRAMMED MESSAGE, IN AND OUT OF GROUP, FORWARD and VOICE

MAIL TRANSFER. The extender can be a station, a group or another identifying number.

4.2.1.32 Programmed Station Messages

Any station may select one of 20 to be displayed at a calling party’s keyset. Ten messages

are factory-programmed but may be reprogrammed. On OfficeServ 100 software last five

messages can be programmable per station basis.

Calling party

The calling party must have a display keyset to view these messages.

4.2.1.33 Protection from Barge-In

Each station can be programmed as secure or not secure. Secure stations cannot be barged-

in on. A station that is not secure cannot be barged-in on when talking to a secure station.

4.2.1.34 Pullout Directory Tray

A pullout directory tray is conveniently located beneath all keysets. It is used to record

station directory names and speed dial numbers.

4.2.1.35 Pulse to Tone Switchover

When dialing a number on a dial pulse network, a station user can dial # and the OfficeServ

system will begin to send DTMF.

4.2.1.36 Redial

There are three types of external redial available to all station users. Each type can redial

up to a maximum of 18 digits.

 Auto Retry - When an outside number is dialed and a busy signal is received, the auto

retry feature can be used to reserve the outside line and automatically redial the

number for a programmable number of attempts(available to keyset users only)