Specifications

OfficeServ 100 General Description Guide/Ed.00

4.2.1.5 Background Music

Keyset users may choose to hear music through their keyset speakers when optional

external sources are installed. Each user may adjust this level by the use of a volume

control program at the selected keyset.

4.2.1.6 Busy Station Callback

When reaching a busy station, callers may request a callback by pressing one button or

dialing a code. The system rings the caller back when that station becomes idle(a system-

wide maximum of 100 callbacks are allowed at one time including busy station and busy

trunk).

4.2.1.7 BLF (Busy Station Indications)

DSS/BLF keys may be assigned to any keyset or add-on module. These buttons will be off

when the station is idle, light red when that station is in use and flash distinctively when

that station is in the DND mode.

4.2.1.8 Call Forwarding

Station users can forward internal and outside calls to other destinations immediately

(Forward All), when busy(Forward Busy) or if not answered in a programmable number of

seconds(Forward No Answer). These forward destinations can all be different. Once a

destination has been programmed, it can be turned on and off with a programmable key.

Forward All takes priority over Busy and No Answer conditions.

In addition to the three usual methods of forwarding described above, a fourth option called

Follow Me is available. This option allows a station user to set a Forward All condition

from his/her station to another station while at the remote station. To display the Follow Me

condition, the TRSF key lights steady red at the station that is forwarded. The TRSF key

also lights if Forward All is set and no key is programmed for Forward All.

Keyset users can set the external destination for all kinds of forwarding. Each outside line

may be programmed to either follow or ignore station call forwarding. A per-station option

controls whether internal calls forward to voice mail or not. Single line telephones must

have the system administrator program this feature for them.

4.2.1.9 Call Logs

With the call log feature, a display keyset user can review up to 50 of the last incoming

calls from the Caller ID review list or up to 50 of the last external telephone numbers that

were dialed.

The numbers can be viewed, stored and/or dialed using the associated soft keys. LCR must

be enabled for dialing and storing numbers from the CID review list. Optional hardware

and/or software may be needed for Caller ID.