Specifications

CHAPTER 4. Business Feature Package

4-32

4.2.1 Station Feature Descriptions

4.2.1.1 Add-On Module

32 Button AOM

The 32-button AOM(add-on module) adds to the capability of any keyset.

The 32 programmable buttons with red buttons can be used for feature keys, DSS/BLF

keys or one touch speed dial buttons. Because this AOM has a microphone and a speaker it

can be used to provide executive off hook voice announce or as a stand alone unit

whenever a handset and dial pad are not required.

64 Button Module

The 64-button module adds to the capability of any keyset. Up to four 64-button modules

can be added to each keyset. The 64 programmable red LED buttons with red LED can be

used for feature keys, DSS/BLF keys or one touch speed dial buttons. A maximum of 5 can

be installed on an OfficeServ 100 system.

4.2.1.2 Appointment Reminder

Keysets with an alarm key can be used like an alarm clock. When programmed for a

specific time, the keyset will sound a distinctive ring to remind the user of meetings or

appointments. Alarms can be set for ‘today only’ or for every day at the same time.

Up to three alarms may be set at each keyset. Display keysets can also show a programmed

message when the alarm rings.

4.2.1.3 Automatic Hold

Station users can enable or disable automatic hold at their keysets. While a user is engaged

on an outside(C.O.) call, pressing another trunk key, route key or CALL button

automatically puts the call on hold when this feature is enabled. Pressing TRSF,

CONFERENCE, PAGE or a DSS key will always automatically place the call on hold.

This type of automatic hold is not a user-selectable option.

4.2.1.4 Automatic Privacy

All conversations on outside lines and intercom calls are automatically private. The privacy

feature can be turned off on a per-line basis.

Intercom calls

Intercom calls cannot be automatically held.