Specifications

CHAPTER 4. Business Feature Package

4-22

DID with Pass Through

Incoming DID, DNIS or DDI calls can be routed through one switch across a network link

to be processed by the DID table of the destination switch.

DND(Do Not Disturb)

This feature operates in the same manner as in a non networked switch. There is an option

in MMC 823 to determine the type of DND tone sent across the network link.

Caller ID

Caller ID in its various forms that are currently available(Analog CID Name and Number,

ANI Number, PRI Name and Number and BRI number) will be transported across the

network link with the original call.

Centralized Attendant

This feature basically allows a user in any switch to dial ‘0’ and ring at the designated

Central attendant group. Each system on the network requires its own designated attendant

group for local usage, recalls and the like.

Intercom Calling/Uniform dialing plan

Station to station and station to group calls can be made across the network link without

having to dial an access code for a call within the network. LCR can also be programmed

to route calls across a network link to access local trunks in another networked system.

Centralized Voice Mail with Message Waiting Lights

This feature will only operate with SVMi-8 and/or SVMi voicemail systems only. Users in

one node can call forward(CFNR, CFB & CFU) to the SVMi-8 group in a different switch

and messages left in that switch will be indicated on the VMSG key in the origination

switch. Messages can be returned to the SVMi-8 or SVMi voice mail system.

4.1.1.67 OPX (Off Premises Extensions)

A single line(tip and ring) extension from an 4SLI card may be connected to telephone

company-provided OPX circuits to remote locations. 8SLI cards and KDB-SLIs do not

support off premises extensions.

4.1.1.68 Operator Group

The operator group can contain 32 stations to answer incoming calls. Calls to this group

can be set for distributed, sequential or unconditional ringing. Operators can use the In/Out

of Group feature to meet flexible operator requirements. Operator groups are selectable per

ring plan.