Specifications

OfficeServ 100 General Description Guide/Ed.00

4.1.1.50 Group Conference

The GCONF button is used to automatically call the preset number and include the person

into the conference when he or she answers the call. This function may only be used for

preset extensions, and up to five conference groups can be assigned to an extension. Up to

five persons, including the user may be assigned to a conference group. The Trunk line,

which can identify if the other party answers the call, shall be used to ensure normal

service when calling external numbers.

4.1.1.51 In Group/Out of Group

Individuals assigned to a station hunt group may temporarily remove their telephones from

the group by pressing the In/Out of Group button providing that there is someone still in

the group.

The OfficeServ 100 system has a system wide option to allow all members to log out of a

station group. Stations out of a group will not receive calls to that group but will continue

to receive calls to their individual extension numbers. When desired, the user may put

him/herself back into the group by pressing the button again. Users who do not have this

button may dial the access code and the group desired. A station user is allowed to be in

several groups, providing a key and the extender of that group are assigned for each group

on the user’s phone.

4.1.1.52 Incoming Call Distribution

Incoming calls can be assigned to ring a distributed station hunt group. This allows all

members of the group to share the call load.

4.1.1.53 Incoming/Outgoing Service

Outside lines are available for incoming or outgoing service. Programming allows any

outside line to be used for incoming calls only, outgoing calls only or both way service.

4.1.1.54 Individual Line Control

Each station in the system can be individually programmed to allow or deny dialing out as

well as allow or deny answering for each outside line.

4.1.1.55 IP Phone Interface

In OfficeServ 100 system, the IP phone Interface supports IP phone interlocking.

An additional MGI(Media Gateway Interface) port is not required for calls between Local

IP phones, but a separate MGI card must be installed for calling an existing station.

There is one type of MGI cards, MGI3. Up to three cards can be installed per system.

The MGI3 card is required for Internet FAX.