Specifications

CHAPTER 4. Business Feature Package

4-4

Extender=001~999 When programmed with an extender ranging from 001 to 999 the button

will, when pressed, automatically insert the account code contained in that bin of the

system account code list. This is known as One Touch account codes. This option can be

denied in system programming to prevent users from bypassing the security of system

account codes.

No Extender When programmed without an extender the button will, when pressed,

prompt the user to enter the bin number the system account code table where the account

codes are stored.

4.1.1.3 All Call Voice Page

Users can page all internal and all external paging zones at the same time by dialing the All

Page code. Keysets may be restricted from making or receiving pages in system

programming. A maximum of 40 keysets can be programmed in each internal page zone to

receive page announcements.

4.1.1.4 Attention Tone

To get your attention, a brief tone precedes all page announcements and intercom voice

calls. There are separate programmable duration timers for page and voice announce tones.

4.1.1.5 Authorization Codes

Authorization codes are used to give permission to make a call. A maximum of 250 four

digit authorization codes can be either forced or voluntary for OfficeServ 100. When used,

authorization codes will automatically change the dialing station’s class of service to the

level assigned to the authorization code. Authorization codes may be programmed to print

or not print on SMDR.

Forced

When a station is programmed for forced authorization, the user must always enter this

code before dialing is allowed. The dialed authorization code is verified from the system

list of 250 authorization codes on an OfficeServ 100.

Voluntary

Any station user can always enter an authorization code before they begin dialing.

The dialed authorization code is verified from a system list of 250 authorization codes for

OfficeServ 100.