Specifications

CHAPTER 2. Hardware Descriptions

2-22

2.4.2.11 KDB-SLI

This is a daughter board that can be installed only in the 12 or 24 button keyset. The KDB-

SLI will provide one additional SLI circuit for the connection of any standard telephone

device. This KDB-SLI will only operate when the keyset is connected to an 8 port DLI

card it can use the second B channel. Each port on this card is intended for connection to

one telephone. Connecting multiple telephones to a port may result in incorrect operation

or damage to the card. See the installation manual Chapter 8 for details.

KDB-SLI board

The circuitry on a KDB-SLI does not provide a loop open disconnect signal or

have the over-voltage protection necessary for OPX operation.