Specifications

CHAPTER 2. Hardware Descriptions

2-4

PLL Card

Any ISDN card, that is a BRI or a PRI, requires the PLL card which can be installed in a

dedicated place on the KSU mother board.

MEM3 Card (operation by the iDCS 100 system)

MEM3 card has EPROM memory to support new features Window PC-MMC, ITM3 &

TEPRI cards

MEM4 Card (operation by the iDCS 100 system)

MEM4 card with LAN interface module, no selectable options. The LAN module is

required to expand the system memory, to provide SIO ports 1EA, and a 10/100 BASE-

T LAN interface processor.

MEM4 card has Flash memory to support new features Window PC-MMC, ITM3, TEPRI

cards and Networking solution by TE/PRI, Program/Database up/download by LAN

interface.

MCP1 Card (operation by the OfficeServ 100 system)

MCP1 card is the main processor card with a 32 bit processor, and controls the overall

operation of the OfficeServ 100 system, supported with RJ45 LAN Interface, DB9 SIO

Connecter and IPC(Inter Processor Communication) with SP(68EC000 in the 008Base

Board), no selectable options. The LAN module is required to expand the system memory,

to provide SIO ports 1EA, and a 10/100 BASE-T LAN interface processor.

 Support with most of current iDCS 100(DCS Compact II) cards.

 Include new MISC 3(4), MGI3 and 4WLI cards & other cards, except MISC 1/2,

ITM3 Cards.

The procedures for mounting and connecting connectors, LED indicator, memory back-up

ON/OFF switch, and only used 500 MDOEM optional d-board and 3 pin cable connected

the MCP1 Card for MP serial data(TXD, RXD ,GND) signaling to the 500 MODEM.