Wall Mounting LCD TV Wall Mounting Bracket Installation and Setup Guide
Wall mounting bracket ●● Accessories LCD TV Wall mounting bracket 4-Wall anchor bolt sleeves 4-Fixing screws (M4x12) 2 4-Washer attaching bolt for wall mounting Installation and Setup Guide
Contents ●● First step Safety Instructions 4 Installation Installing Wall monution bracket 1. Detach the units 2. Assemble a TV with the TV mounting bracket 3. Fix anchors after marking the positions where units are mounted on the wall 4. Install the wall mounting bracket on the Wall 5.
Safety Instructions - To prevent the accident danger, read this manual and follow the instructions ※ Safety instructions have two kinds of information, and each meaning of it is as blow. WARNING The violation of this instruction may cause serious injuries and even death. NOTES The violation of this instruction may cause light injuries or damage of the product. Take care of danger that may happen under specific condition. Do not install this product on the place where it cannot be supported.
When drilling use drill and drill bit specified by the manufacturer. And the depth of the hole should satisfy the specifications. First Step Before installing, check whether the material of wall satisfies the specifications and make sure to use enclosed anchors supplied with the product. - Otherwise it may cause safety problem. - Otherwise it may cause safety problem. - It may cause a fire or could give an electric shock.
Installing Wall mounting bracket 1. Detach the units • Detach bolt from wall mounting bracket. • Detach TV fixing bracket from Wall mounting bracket.
First Step 2. Assemble a TV with the TV mounting bracket • Attach the TV fixing bracket to the TV using the fixing screws provided. Before intalling this product, turn off the power and disconnect from all cables connected. 2 Installation 1 Others 1 2 Carefully place the Monitor screen side down on a cushioned surface that will protect the monitor and screen from damage. Insert the TV mounting bracket on the monitor as shown above.
Installing Wall mounting bracket 3. Fix anchors after marking the positions where units are mounted on the wall • The surface that the wall mounting bracket is to be mounted on should be of sufficient strength to support the weight of the monitor and speakers typically; concrete, strong/weak natural rock, brick and hollow block.
First Step 4. Install the wall mounting bracket on the wall 1 2 Installation Washer attaching bolt for wall mounting Others 1 2 Mount the wall mounting bracket on the wall using the 4 washers and bolts supplied. Adjust the fixing bolt head angles as necessary, see above.
Installing Wall mounting bracket 5. Assemble the TV with the wall mounting bracket • Assemble a TV with the wall mounting bracket installed on the wall as above Fig. Do not install this product by yourself. Get some help from others . It may cause the product to fall and could cause injuries . 1 ⓐ ⓒ ⓑ ② ① 1 wall 2 2 10 Tilt TV fixing bracket assembled with TV as above Fig, and insert screw to the hole.
Adjusting Tilt Angle First Step • Adjus table angle range is 10°(ups ide) and 15°(downs ide) (Tilt angle can be adjusted after installing wall mounting bracket.) • Do not adjust Tilt angle with immoderate force. It may cause damage of product or could cause injuries . 10° Installation 15° Adequate installation space from the wall • Leave 48 mm between the TV screen and the wall when ins talling the VESA compatible adaptor/ interface on the wall.
Product specification Depth Height Width PRODUCT LCD TV Wall Mounting Bracket Width (mm) 140 Height (mm) 216.5 Depth (mm) 48 Weight (kg) 0.93 CAPACITY LCD/WEIGHT UNDER 10.5 kg • The specifications shown above may be changed without prior notice for quality improvement.
