SS7500 Series Vacuum Cleaner user manual ✻ Before operating this unit, please read the instructions carefully. ✻ For indoor use only. ENGLISH imagine the possibilities Thank you for purchasing a Samsung product. To receive a more complete service, please register your product at www.samsung.com/register DJ68-00611C (EN).indd 01 2011.8.
safety information SAFETY INFORMATION WARNING • Before operating the appliance, please read this manual thoroughly and retain it for your reference. • Because these following operating instructions cover various models, the characteristics of your vacuum cleaner may differ slightly from those described in this WARNING manual. WARNING • This vacuum cleaner is designed for household use only. Do not use this vacuum cleaner to clean building waste or debris.
safety information IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should be observed, including the following: READ ALL INSTRUCTIONS BEFORE USING YOUR STICK VACUUM CLEANER. Unplug from outlet when not in use and before conducting maintenance. WARNING : to reduce the risk of fire, electric shock, or injury: GENERAL • Use only as described in this manual. • Do not operate the STICK vacuum cleaner or charger if it has been damaged in any way.
contents ASSEMBLING THE CLEANER 05 OPERATING THE CLEANER 10 MAINTAIN TOOLS AND FILTER 13 05 Assembling the cleaner 07 Assembling the handle and the main body 07 Assembling the main body and the power brush 07 Assembling the main body and the handy cleaner 08 Charging 09 About the battery 10 10 10 11 11 Using the stick cleaner Using the power brush Using the handy cleaner Using the crevice / dusting Emptying the dust bin 13 Cleaning the filter 14 Countermeasure to remove anything clogging the cleaner
assembling the cleaner ASSEMBLING THE CLEANER Front view Rear view 01 ASSEMBLING Handle Power button The button to separate the handy cleaner Front vent Rear vent The button to separate the dustbin Dustbin The button to separate power brush power brush shutter Charging pins Power brush Charger crevice / dusting Charging terminals Charging lamp crevice / dusting cradle Handy cleaner Dustbin cover Hepa filter Power button Grill filter The button to separate the dustbin Dustbin assembling _05 DJ68
assembling the cleaner Check the contents of the package. Handle Handy cleaner Main body Power brush Charger User manual Crevice / Dusting Screw Guiding key Sub items to assemble the handle and the main body 06_ assembling DJ68-00611C (EN).indd 06 2011.8.
ASSEMBLING THE HANDLE AND THE MAIN BODY Insert the guiding parts of the handle as far as possible into the hole of the main body, insert the guide key into the holes of the handle and then fasten the screw with the (+) screw driver. 2 3 Guiding parts Guiding key Handle Main body 01 ASSEMBLING 1 Screw Holes on the main body ASSEMBLING THE MAIN BODY AND THE POWER BRUSH Insert the connector of the power brush into the hole of the main body until it clicks into place.
assembling the cleaner CHARGING 1. Install the charger on a flat surface and then plug the power cable. 2. Turn the power buttons of the main body and the handy cleaner off. • The battery does not charge when the power button is on. 3. Connect the handy cleaner to the main body. (When the main body and the handy cleaner are not assembled, the stick cleaner does not work.) 4. Install the cleaner with the charger aligning the charge pins of the cleaner with the charge terminals of the charger.
• NOTE • • 01 ASSEMBLING • Charge the product in the following cases. - When using the product for the first time after purchasing it or after not using it for a long period. - When the battery level is low and the suction power is weak. When you charge the cleaner after purchasing or using it, charge the product for approximately 4 hours before using it. To charge the battery fully when the battery is discharged takes approximately 4 hours.
operating the cleaner USING THE STICK CLEANER Using the stick cleaner allows you to clean the floor without bending over. Stick Cleaner On / Off • When the power button is pressed, the operation alternates between . CAUTION Power button 1. Only when the handy cleaner is assembled, does the stick cleaner work. (For assemblying the handy cleaner: See page 7). 2. When you use the stick cleaner, turn the handy cleaner power off. Countermeasure when the stick cleaner is not turned off.
2. Handy Cleaner On / Off • When the power button is pressed, the operation . alternates between Power button 02 OPERATING CAUTION 1. Connect the handy cleaner to the main body after using it. (See page 7). 2. When you connect the handy cleaner to the main body, make sure to turn the handy cleaner off. USING THE CREVICE / DUSTING Insert crevice/dusting into the end of the air inlet on the handy cleaner to install it. To remove it, simply pull it out.
operating the cleaner 4. Empty the dust bin. 5. Close the dust bin cover. 6. Push the dust bin down until it “clicks” into place. ‘Click’ • NOTE Using a plastic bag This method is recommended for people with allergies or asthma. Cleaning the dustbin with cold water is also recommended. 12_ operating DJ68-00611C (EN).indd 12 2011.8.
maintain tools and filter CLEANING THE FILTER 1. Press the [buttons to separate the dustbin] with your thumb and middle finger and then pull it out. 03 MAINTAIN 2. Lift the dustbin cover. Hepa filter 3. Hold the dust bin cover and separate the grill filter and the micro filter from the dust bin cover by pulling them and pressing the grill filter fixing hook. Grill filter fixing hook Grill filter 4. Shake the dust from the filters and then wash the hepa filter until it is clean. 5.
maintain tools and filter Maintaining the filter CAUTION • Do not dry it near a microwave or fire. • Do not clean it by putting it into a washer or using an unapproved detergent. (See page 5). • After cleaning, dry it completely in the shade. - If you use the filter when it is not completely dried - Moisture or water may enter the motor and cause a problem. - The dust and moisture in the inlet solidifies and this drastically decreases the sucking power. - The filter may smell.
4. Remove any hairs and threads around the drum with a vaccuum cleaner. 03 MAINTAIN 5. Install the belt onto the drum and fix the drum using the fixing grooves. 6. After fixing the drum, insert the air inlet cover into the groove and assemble it by slightly sliding it down. • NOTE • Since an oil-papered or wood-covered floor may be scratched by the cleaner, please check the type of wheels of the air inlet. If you cannot remove foreign objects from the cleaner, please contact a service center.
troubleshooting PROBLEM SOLUTION Motor downs and does not start. • • Check cable, plug and socket. Leave to cool. Suction force is gradually decreasing. • Check for blockage and remove. Low or decreasing suction. • Please check filters. If required clean it as illustrated in the instruction. 16_ troubleshooting DJ68-00611C (EN).indd 16 2011.8.
memo DJ68-00611C (EN).indd 17 2011.8.
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. COUNTRY CALL OR VISIT US ONLINE AT AUSTRALIA 1300 362 603 www.samsung.com/au HONG KONG (852) 3698-4698 www.samsung.com/hk www.samsung.com/hk_en MALAYSIA 1800-88-9999 www.samsung.com/my SINGAPORE 1800-SAMSUNG(7267864) www.samsung.com/sg DJ68-00611C (EN).indd 18 2011.8.
