User Manual
Table Of Contents
- Safety information
- Important safety symbols and precautions:
- Severe warning signs for transportation and site
- Critical installation warnings
- Installation cautions
- Critical usage warnings
- Usage warning
- Usage cautions
- Cleaning cautions
- Critical disposal warnings
- Additional tips for proper usage
- Saving Energy Tips
- This appliance is intended to be used in household and similar applications such as
- Instructions about the WEEE
- Installation
- Operations
- Maintenance
- Troubleshooting
Maintenance
English46
Maintenance
STEP 4 Reverse the bottom hinge
1. Lay down the refrigerator with care.
Then, remove the screws from the
bottom hinge on the right side and
the levelling leg on the left side,
respectively.
1
1
2
4
5
6
2. Use an 8 mm socket wrench to remove
the rear bolt next to the shaft.
3. Remove the shaft bolt beneath the
bottom hinge.
4. Use a Phillips screwdriver to remove the
shaft.
5. Insert the shaft in the opposite side.
6. Reinsert and tighten the rear bolt.
7. Reinsert and tighten the shaft bolt.
8. Insert the bottom hinge in the opposite
side and tighten with screws. Mount the
levelling leg in the opposite side and
tighten with screws.
9. Stand the refrigerator with care.
Untitled-12 46 4/26/2018 11:39:13 AM