Specifications

SRP-500 Command Manual
Rev. 1.00 BIXOLON
- 9 -
ENQ
Function: Request to printer
Code:
ASCII
ENQ n
Hex
05 n
Decimal
5 n
Range:
n = 2
Default:
None
Description:
This command enables the printer to restore from an error state after clearing the receive and print buffers.
Remarks:
■ This command can be executed in a real time mode with DLE preceding it.
■ In a real time mode, upon receiving this command, the printer carries out the resume operation to get back normal by
clearing error conditions.
■ With a serial interface, the error state of the printer, limited to recoverable errors, can be removed by sending this
command even if the printer is in offline or busy condition.
■ With a parallel interface, this command is not performed in a busy condition because the printer can not receive the
data from the host.
Differences:
None