Specifications

SRP-500 Command Manual

Rev. 1.00 BIXOLON

- 68 -

GS V

Function: Select cut mode and cut paper

Code:

ASCII

GS V m

Hex

1D 56 m

①

Decimal

29 86 m

ASCII

GS V m n

Hex

1D 56 m n

②

Decimal

29 86 m n

Range:

① m=0, 1, 48, 49 m=65, 66, 0 ② ≤ n ≤ 255

Default:

None

Description:

This command cuts paper in the specified mode as follows.

m Function

0,48 Executes a full cut (cuts the paper completely)

①

1,49 Executes a partial cut (one point left uncut)

Feeds paper to (cutting position + n × vertical motion unit) and executes a partial cut(one point left

uncut)

②

Feeds paper to (cutting position + n × vertical motion unit) and executes a partial cut(one point left

uncut)

Remarks:

For ①

■ If an auto cutter is not provided, this command is ignored command is executed.

For ②

■ When n = 0, the printer feeds the paper to the cutting position and cuts it.

■ If an auto cutter is not provided, the printer only feeds the paper for specified amount.

■ Vertical motion unit is used for calculating a paper feed amount.

Differences:

■ Cutting mode is changed only by setting MSW2-2.