Specifications

SRP-500 Command Manual
Rev. 1.00 BIXOLON
- 19 -
■ The setting items of the memory switch 8 are as follows:
• Either the character font A or B is selected.
• The beep is activated for the audible paper empty warning signal.
• The beep is activated for the audible low battery warning signal.
• The label printing is available by the setting.
Msw Value Function
8-1 48 Reserved
48 Font A
8-2
49 Font B
48 Beep disabled for paper end
8-3
49 Beep enabled for paper end
48 Beep enabled for low battery status
8-4
49 Beep disabled for low battery status
48 Label mode disabled
8-5
49 Label mode enabled
8-6 48 Reserved
8-7 48 Reserved
8-8 48 Reserved
■
The setting items of the memory switch 10 are as follows:
Specify the roll paper width to be used and color printing
Switch Function ON OFF
1~4 Reserved -- Fixed to OFF
5 Printing width 2 inch 3 inch
6 2Color support Enable Disable
7~8 Reserved -- Fixed to OFF
Remarks:
None
Differences:
■ The memory switch 1 is available.