4 CHANNEL DVR User Manual SRD-450
overview FEATURES This product enables you to record 4 channels of camera image and voice source simultaneously. This feature provides an excellent picture quality for both real time monitoring and search. • You can also monitor remote videos or search for your previous recordings and change the menu settings of the DVR via the network. • As this product can bypass the Windows operating system to implement the DVR-specific operating system on its hardware components, the overall operation is stable.
IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.
overview CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit. This exclamation point symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
CAUTION Do not drop objects on the product or apply strong blows to it. Keep away from a location subject to excessive vibration or magnetic interference. 2. Do not install in a location subject to high temperature (over 50°C), low temperature (below -10°F), or high humidity. Doing so may cause fire or electric shock. 3. If you want to relocate the already installed product, be sure to turn off the power and then move or reinstall it. 4.
overview BEFORE START This user’s manual provides Information for using DVR such as brief introduction, part names, functions, connection to other equipment, menu setup, and the like. You have to keep in mind the following notices: • SAMSUNG retains the copyright on this manual. • This manual cannot be copied without SAMSUNG’s prior written approval. • We are not liable for any or all losses to the product incurred by your use of non-standard product or violation of instructions mentioned in this manual.
Standards Approvals M This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 Package Contents Please unwrap the product, and place the product on a flat place or in the place to be installed. Please check the following contents are included in addition to the main unit. User Manual Quick Guide CD Remote Control / Battery (AAA×2) Adaptor Power Cable English _7 OVERVIEW of the FCC Rules.
overview CONTENTS OVERVIEW 2 Features 2 3 Important Safety Instructions 6 Before Start 10 Part Names and Functions (Front) 11 Part Names and Functions (Rear) 12 Remote Control CONNECTING WITH OTHER DEVICE 14 14 Connecting the Audio, Speaker, Mouse, and Power Cable 14 Connecting the Alarm I/O 15 Network Connection GETTING STARTED 17 Starting the System 17 17 Log On 18 Log In 18 Log Off 18 Power Off LIVE 19 Live Screen Configuration 19 20 View the Launcher Menu 21 Disp
49 Backup 51 Search WEB VIEWER 53 Introduction 53 56 Live Viewer 59 Search Viewer 60 Search by Time 60 Search by Event 61 Setup 67 Information 68 Using the iPhone APPENDIX 69 Product Specification 69 71 Open Source License Report on the Product BACKUP 49 SEARCH & PLAY OVERVIEW 51 English _9
overview PART NAMES AND FUNCTIONS (FRONT) 8 7 POWER DIGITAL VIDEO RECORDER 6 ALARM REC NETWORK DISPLAY SEARCH MENU 1 2 3 4 Part Names 5 Functions Power Used to turn on or off the system. b DISPLAY Each time you press in Live mode, the screen will be switched in the sequence of 4-split, Single and Auto Sequence in order. SERACH Goes to the search screen. MENU Goes to the system menu screen. Direction ▲▼◄► : Used to select a system menu item.
PART NAMES AND FUNCTIONS (REAR) 2 3 4 Part Names b c 5 6 7 OVERVIEW 1 8 Functions DC Input (DC12V) Power connection port for 12V/4A adaptor NETWORK RJ-45 port for network connection. USB Supports USB 2.0 protocol that enables you to back up the video signal stored in the HDD using an external memory device and to connect USB memory. VIDEO IN Composite video signal input port (BNC type port). VIDEO OUT Composite video signal output port (BNC type port).
overview REMOTE CONTROL DVR Available after switching to DVR mode by pressing the [DVR] button on the remote control. SEARCH BACKUP Switches to search mode for video search. At the moment, you should select an authorized user and enter the password. Switches to backup mode. MODE Activates the DVR function. DVR Changes the display mode. POWER Turns on/off or logout the system.
Changing Remote Control ID In a multi-DVR system using a single remote control, you can control only the DVR that matches the ID that you have set using the ID button. 1. Press the [ID] button to check the ID of each of "REMOCON ID" and "SYSTEM ID". The defaults are 00 for the System ID and 00 for the Remote ID, respectively. 2. To change the Remote ID of the IR REMOTE CONTROLLER, press and hold the [ID] button while entering a desired combination of two digits from 00 to 99. 4.
connecting with other device CONNECTING THE AUDIO, SPEAKER, MOUSE, AND POWER CABLE Network CONNECTING THE ALARM I/O Connecting the alarm Input signal Connection port for the alarm input signal. Connect one strand of the sensor signal line (two strands) to the alarm input port and connect the other to the [G] port. Connecting the alarm output signal Connection port for the alarm output signal. • NO (Normal Open) : Sensor is open in normal condition, it generates alarm if the sensor is closed.
NETWORK CONNECTION Local System Configuration Use the router or hub in the same local network to connect to the DVR and local PC where you can control the remote DVR or check the recording data in the DVR. IP Router or HUB Local PC #1 Local PC #2 ALARM REC NETWORK DISPLAY SEARCH MENU CONNECTING WITH OTHER DEVICE POWER DIGITAL VIDEO RECORDER DVR 1. Connect the network port on the rear DVR panel to the router or hub. 2. Connect the network port on the local PC to the router or hub. 3.
connecting with other device Total System Configuration You can use the 10/100 Mbps Ethernet connector on the product to connect to the network. Connecting to the network enables you to perform various functions including remote monitoring, remote search and remote control. IP Router or HUB Cable/ADSL Modem INTERNET or DDNS Server (websamsung.
getting started STARTING THE SYSTEM 1. Connect the power cable of the DVR to the wall outlet. GETTING STARTED 2. You will see the initialization screen. LOG ON To make use of the DVR, you must log on after the system started. You must log on before you can use the features of the DVR. 1. Select a user account that you want to log on with. 2. Enter the password. The default user is “admin” and password is “4321”. LOG ON admin USER ID PASSWORD .
getting started LOG IN To access menu items of Logout, System Setup, Record Setup, Backup and Search, you must have logged in. 1. If you try to access restricted menus, the login dialog pops up. 2. Select a user account, enter the password and press the button. The default user is “admin” and password is “4321”. The user who has a limited access to the menu will not be LOG IN admin USER ID PASSWORD .
live LIVE SCREEN CONFIGURATION Icons on the Live Screen MENU BACKUP SEARCH Name Camera Name DISP REC ow c Description Displays the name of the camera. C : Indicates continuous recording. b A : Indicates alarm recording. Recording Modes M : Indicates motion detection recording. I : Indicates instant recording. c Launcher Menu Displays the current time, menu and status.
live VIEW THE LAUNCHER MENU You can use the Launcher menu appearing on the bottom of the live screen to access it. 1. On the Live screen, move the cursor or press the [MENU] button on the remote control to display the Launcher menu. 2. Use the direction buttons or the cursor to select a desired menu. M You can adjust the display time of the Launcher in “DISPLAY > OSD > STATUS BAR TIMEOUT”.
DISPLAY You can select a screen split mode or perform the auto sequence function. Switching the screen mode You select a screen mode from single and 4-split. 1. Press the button from the Launcher menu. LIVE 2. Select a split mode in the split option menu. Press the [MODE] button on the front panel or the remote control to switch the mode in the sequence of the launcher menu items. MENU BACKUP SEARCH DISP ow REC Auto Sequence You can perform the auto sequence function. 1.
live PLAYBACK In Live screen, you can immediately play any of the previous recordings in the selected channel. To playback by time option 1. Select a channel to play, and right-click it to display the context menu where you select . 2. Select a desired start time of playback. PLAYBACK > 10SEC AGO 20SEC AGO 30SEC AGO 1MIN AGO GO TO .. RECORD START MENU BACKUP SEARCH DISP REC ow SEARCH DISP REC ow To playback by time selection 1. You can select
DVR setup BEFORE STARTING SETTING UP You can configure the DVR settings to your preference. How to use remote control and mouse You can use either the remote control or the cursor to select or change the setting of each menu item. 1. Use the four direction (▲▼◄►) buttons to move to a desired item and press the [ENTER] button. You must press the [ENTER] button to confirm the selected item. 2. Use the up/down (▲▼) buttons to adjust the given option values.
DVR setup SYSTEM You can configure the settings of DATE/TIME, SYSTEM MANAGEMENT and REMOTE CONTROLLER. See the previous section to repeat steps 1~3. (Page 23) DATE/TIME You can specify the display time. Using the mouse may help easy setup. 1. Use the direction buttons to move to the upper icon and press the [ENTER] button. The DATE/TIME setup screen appears. SYSTEM 2. Use direction buttons (▲▼◄►) to move to a desired item, and press the [ENTER] button to set the value.
SYSTEM MANAGEMENT You can check, update and initialize the system information. Using the mouse may help easy setup. 1. Use the direction buttons to move to in the left corner of the SYSTEM setup menu and press the [ENTER] button. SYSTEM DATE / TIME INFO SYSTEM INFORMATION 2. Use direction buttons (▲▼◄►) to move to a desired item, and press the [ENTER] button to set the value.
DVR setup To update the firmware 1. Connect the device storing the update files to the USB port. 2. Press button in system management menu. 3. Select device, you will see the firmware list. SYSTEM DATE / TIME SYSTEM MANAGEMENT REMOTE CONTROLLER FIRMWARE UPDATE USB LOAD SAVE SYSTEM DATA PASSWORD SYSTEM ID NETWORK LOAD ON AUTO LOGOUT UPDATE DURATION 4. Select update file in .
CAMERA You can configure the settings of each connected CAMERA, COLOR and MOTION SENSOR. CAMERA You can configure the camera settings of TITLE, COVERT and AUDIO to your preference. Using the mouse may help easy setup. DVR SETUP 1. Use the direction buttons to move to the upper icon and press the [ENTER] button. The CAMERA setup screen appears. CAMERA To change the camera title 2. Select an item in the title column. The virtual keyboard appears. CAMERA 3.
DVR setup Covert 1. Select a camera channel to covert. 2. Use the up/down (▲▼) buttons in the right corner to select either or and press the [ENTER] button. - If set to , no information of the corresponding channel will be displayed. However, it continues recording. - If set to , video input from the corresponding camera will be displayed. Audio Connection 1. Select a camera channel to connect to the audio source. 2. Select an audio input port. 3.
MOTION SENSOR You can set the event recording so that the DVR can detect the event and specify the recording area. Using the mouse may help easy setup. 1. Use the direction buttons to move to in the left corner of the CAMERA setup menu and press the [ENTER] button. 2. Select a channel and specify the sensitivity of the motion detection.
DVR setup DISPLAY You can configure the settings of OSD, MONITOR and SEQUENCE. See the previous section to repeat steps 1~3. (Page 23) OSD You can specify the color and language for the time, title, border and motion displayed on the screen. Using the mouse may help easy setup. 1. Use the direction buttons to move to the upper icon and press the [ENTER] button. The OSD setup screen appears. DISPLAY 2.
2. Use direction buttons (▲▼◄►) to move to a desired item, and press the [ENTER] button to set the value. • • • • • 3. When your settings are completed, press the button on the bottom. Your settings will be applied. 4. Press the button to display the confirmation dialog and return to the previous menu. SEQUENCE You can select a split mode of the sequence and add or adjust the sequence dwell time. Using the mouse may help easy setup. ADDING SEQUENCE 1.
DVR setup 5. When the ADD SEQUENCE window appears, press the button. ADD 6. When the SEQUENCE SETUP window appears, Use direction buttons (▲▼◄►) to move to a desired item, and press the [ENTER] button to set the value. CLOSE SEQUENCE SETUP • VIEW TYPE: Select a split mode to sequence. • CONFIGURE: Select a channel to display on each split screen. CONFIGURE VIEW TYPE 1 2 3 4 CONFIRM 7. Press the button. The set sequence mode will be confirmed and displayed on the ADD window.
SOUND You can configure the settings of AUDIO and BUZZER. See the previous section to repeat steps 1~3. (Page 23) AUDIO You can select to input the live audio source and select an audio channel. Using the mouse may help easy setup. DVR SETUP 1. Use the direction buttons to move to the upper icon and press the [ENTER] button. The AUDIO setup screen appears. SOUND 2. Use direction buttons (▲▼◄►) to move to a desired item, and press the [ENTER] button to set the value.
DVR setup USER You can configure the settings of USER MANAGEMENT, USER AUTHORITY and LOGOUT. See the previous section to repeat steps 1~3. (Page 23) USER MANAGEMENT Add a user account whose information you can edit later. Using the mouse may help easy setup. 1. Use the direction buttons to move to the upper icon and press the [ENTER] button. The USER MANAGEMENT setup screen appears. USER 2. Use the direction (▲▼◄►) buttons to move to a desired item and add, delete or change the user account.
To change the user information 1. Select a user account that you want to change in the user list. The “EDIT” window appears. 2. Make necessary changes and press the button. USER USER MANAGEMENT USER ID admin ABC USER AUTHORITY The “admin” ID can not be removed. E-MAIL GROUP admin EDIT USER ID PASSWORD GROUP E-MAIL E-MAIL NOTI. ABC **** MANAGER OFF DELETE OK CANCEL 3. To remove a user account, press the button. CANCEL ADD APPLY CLOSE DVR SETUP 4.
DVR setup NETWORK You can configure the settings of IP SETUP, DDNS and E-MAIL. See the previous section to repeat steps 1~3. (Page 23) IP SETUP You can specify the IP of the DVR according to the network connection. Using the mouse may help easy setup. 1. Use the direction buttons to move to the upper icon and press the [ENTER] button. The IP Setup screen appears. NETWORK 2. Use direction buttons (▲▼◄►) to move to a desired item, and press the [ENTER] button to set the value.
To view the HELP You can view the explanation of each item of the IP SETUP menu. 1. Press the button in the lower corner of the IP SETUP menu. 2. Read through the help and press the button to close the window. NETWORK DHCP : When enabled, the DVR will obtain an IP address automatically if connected to a DHCP server or router. IP WEB SETUP SERVICE : When enabled, allows remote connections using internet Explorer or other web browsers.
DVR setup E-MAIL You can send an email notice to DVR registered users at a certain interval or when an event occurs. Using the mouse may help easy setup. 1. Use the direction buttons to move to in the left corner of the NETWORK setup menu and press the [ENTER] button. 2. Use direction buttons (▲▼◄►) to move to a desired item, and set the value. NETWORK IP SETUP DDNS E-MAIL SERVER PORT SECURITY 25 OFF USER PASSWORD FROM • SERVER: Set the mail server.
If not using a router for network connection Static IP Setup Mode • Internet Connection: Use ADSL or the dedicated line for the static IP, or connect between DVR and remote users in the LAN environment. • DVR Network Setup: Check the network status of the connected DVR. NETWORK IP SETUP DHCP 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.
DVR setup DVR Connection 1. Use the direction buttons to move to the upper icon in the SYSTEM SETUP menu screen and press the [ENTER] button. The IP SETUP screen appears. 2. Deselect the checkbox. 3. Locate the local PC in connection with the same router and check information of gateway, subnet mask 1st DNS and 2nd DNS server. 4. Provide the IP address, gateway, subnet mask 1st DNS, 2nd DNS server as appropriate. M If the DHCP server has the start address (192.168.0.
2. Use direction buttons (▲▼◄►) to move to a desired item, and press the [ENTER] button to set the value. • SMART ALARM: Specify the availability of the alarm if the HDD has a problem. • DISK FULL EVENT: Set to notify the user when the HDD is full. 3. When your settings are completed, press the button on the bottom. Your settings will be applied.
DVR setup ALARM OUTPUT You can specify the alarming conditions and the operating time. Using the mouse may help easy setup. 1. Use the direction buttons to move to in the left corner of the EVENT/SENSOR setup screen and press the [ENTER] button. 2. Use direction buttons (▲▼◄►) to move to a desired item, and press the [ENTER] button to set the value. • OPERATION: Set the operation of the alarm output. - If set to , the applicable menu is activated where you can set other options.
3. When your settings are completed, press the button on the bottom. Your settings will be applied. 4. Press the button to display the confirmation dialog and return to the previous menu. E-MAIL NOTIFICATION You can specify the conditions so that you can send an email notice to DVR registered users at a certain interval or when an event occurs. 1. Use the direction buttons to move to in the left corner of the EVENT/ SENSOR setup screen and press the [ENTER] button. 2.
DVR setup DISK MANAGEMENT You can specify the recording auto deletion and overwrite options and format the HDD recording data. See the previous section to repeat steps 1~3. (Page 23) 1. Use the direction buttons to move to the upper icon and press the [ENTER] button. The DISK MANAGEMENT screen appears. DISK MANAGEMENT 2. Use direction buttons (▲▼◄►) to move to a desired item, and press the [ENTER] button to set the value. • AUTO DELETE: Specify the auto deletion period.
RECORD SETUP You can configure the settings of record-related options such as RECORDING OPERATIONS, CONTINUOUS/ MOTION RECORDING, ALARM RECORDING, INSTANT RECORDING. To start the RECORD SETUP 1. Press the [MENU] button on the remote control or click
DVR setup CONTINUOUS/MOTION RECORDING You can specify the continuous recording time, the recording size and the quality. Using the mouse may help easy setup. 1. Use the direction buttons to move to in the left corner of the RECORD setup screen and press the [ENTER] button. RECORD RECORDING OPERATIONS SIZE/FPS/QUALITY ACTIVATION 0 2. Use direction buttons (▲▼◄►) to move to a desired item, and press the [ENTER] button to set the value.
3. Select a desired event recording mode. • NONE: Does not perform recording. • CONTINUOUS: Performs the recording continuously. • MOTION: Performs the recording only if a motion is detected. To record a motion, set both and in "CAMERA > MOTION SENSOR". (Page 29) • CONTINUOUS/MOTION: Performs both continuous and motion recording modes. 4. Press the button. The color of the specified area will be changed to the color of the specified record type. DVR SETUP 5.
DVR setup To specify the alarm recording time You can specify the alarm recording time for each channel. 1. From the ALARM RECORDING menu screen, select . Your change to the recording size will be applied to the time bar. 2. Drag the cell that you want to adjust the size, or use the direction buttons (▲▼◄►) on the remote control and press the [ENTER] button.
backup You can check the backup data size and perform backup of a desired channel or at a desired time. BACKUP BACKUP 1. Press the [MENU] button on the remote control or select button on the launcher menu. The login dialog appears. 2. Select a user account and enter the password. Only those users who have the backup permission can access the BACKUP menu. Web Viewer doesn't support data backup including the neighborhood of DST transition (ON ➝ OFF) time.
backup 6. Press the or button on the bottom. • RESERVE: The selected data will be backup to the HDD, which you can check in . • WRITE: Backs up the selected data to the connected storage device. BACKUP NEW BACKUP RESERVED DATA MANAGEMENT TAG WRITING DEVICE NO DEVICE TAG NAME DATA3 LOG CODEC SK6211 DEVICE WRITING WRITING TYPE ALL 1 2 CH 1Writing...
search & play You can perform the search for recorded data by the time or by the search criteria such as an event. SEARCH SEARCH & PLAY 1. Press the [SEARCH] button on the remote control or press the button on the launcher menu. The login dialog appears. 2. Select a user account and enter the password. Only those users who have the search permission can access the SEARCH menu. MENU BACKUP SEARCH DISP ow REC SEARCH BY TIME You can schedule to search for recording data at a desired time.
search & play SEARCH BY EVENT You can search for events and play data for a specific channel. Using the mouse may help easy setup. 1. Use the direction buttons to move to in the left corner of the SEARCH screen and press the [ENTER] button. 2. Use the direction buttons (▲▼◄►) to move to a desired item and press the [ENTER] button. Specify the channel to search and the event period. SEARCH SEARCH BY TIME SEARCH BY EVENT ALL 1 ALL SYSTEM FROM TO 2 SETUP ALARM 3 MOTION V.
web viewer INTRODUCTION What is web viewer? Web Viewer a user friendly software program that enables you to connect to the DVR in a remote area and control the live or existing video data. The following lists the minimum suggested hardware and operating system requirements needed to run the Web Viewer. OS Web Browser CPU Windows XP Professional Windows Vista Home Basic /Premium Windows 7 MS Explorer 5.5 up (32 bit only) Intel Pentium 2.
web viewer To connect to the Web Viewer 1. Open the browser and provide the IP address of the DVR, or URL in the address bar. M You must have specified the IP address in “NETWORK > IP SETUP”. The initial URL of the DVR is the last 6 digits of the MAC address, which you can check in “SYSTEM > SYSTEM MANAGEMENT > SYSTEM INFORMATION”. (Page 25) 2. As the administrator, you should provide the admin ID and the password. As a registered user, you should provide the user ID and the password. 3.
6. Click when IMM4 Codec Setup Wizard appears. WEB VIEWER 7. Click . 8. Click to exit setup. 9. The installation is completed. You will see the main screen of the Live Viewer.
web viewer LIVE VIEWER Live Viewer At a Glance b c Name Description Viewer Selection Area Consists of 4 tabs: , , and . Live Viewer Screen Displays the Live screen of the currently connected DVR. Split Screen Switches the screen mode to Single, 4-split mode. Status Indicates the status of each channel. Log Shows the log. Reload loads the DVR information again. Refresh Time Specify the refresh time.
M When you can’t save the image, check if the following is applied in your Internet Explorer. “Tools > Internet Option > Security” Tab Uncheck “Enable Protected Mode(requires restarting Internet Explorer)” and restart Internet Explorer, please! WEB VIEWER Switching between split modes Click the mode switch buttons to switch the screen mode as follows. SINGLE 4-SPLIT To record video 1. Click < >. 2. The video of the selected channel will be saved in the default saving path of the PC.
web viewer Screen Capture 1. Click < >. 2. The current screen of the selected channel will be saved in the default saving path of the PC. M Click to display the Settings menu where you can change the default path. ActiveX Setting 1. Click < >. 2. When the Setting window appears, specify and for the video or the screen to capture. 3. To change the saving path, click and In Windows Vista, you can not change the file path.
SEARCH VIEWER Click the tab to display the remote play screen of the DVR. Search Viewer At a Glance n m c Name Description Viewer Selection Area Consists of 4 tabs: , , and . b Search Screen Displays the playback screen of the recorded video. c Play Bar Buttons used to control the playback screen. Split Screen Switches the screen mode to Single or 4-split mode. For more information, refer to “Live Viewer At a Glance”.
web viewer Name Description Refresh Refreshes the screen ActiveX Setting Specify the saving path of the recorded or captured screen. Capture Image Captures the current screen. m Print Prints out the current screen. n Channel Selection Select a channel of the camera that is connected to the DVR. M For details about the ActiveX setting/Capture Image/Print menus, refer to “Live Viewer”. SEARCH BY TIME You can search for recording data in the DVR using the time range. 1.
SETUP Click the tab to display the DVR remote setup screen. Setup Viewer At a Glance b WEB VIEWER c Name Description Viewer Selection Area Consists of 4 tabs: , , and . b Menu Tree Select a desired menu item. c Details Detailed information of the selected menu item. Ok/Cancel Saves or cancels your settings. Camera Setting You can configure the settings of the camera that is connected to the DVR. 1.
web viewer Color setting You can adjust all settings from 0 to 100 for each channel in fine tune mode, and the default is 50. 1. From the left menu tree, select . 2. Click . 3. Make your changes as necessary in details. For more information, refer to “COLOR”. (Page 28) 4. Click . Your changes will be saved. Motion setting You can specify the motion detection area, and specify the use of the alarm output if a motion is detected.
Monitor setting You can adjust the position of the displayed items. 1. From the left menu tree, select . 2. Click . 3. Make your changes as necessary in details. For more information, refer to “MONITOR”. (Page 30) WEB VIEWER 4. Click . Your changes will be saved. Audio/Buzzer setting You can configure the audio and buzzer related settings. 1. From the left menu tree, select . 2. Make your changes as necessary in details.
web viewer Control Device Setting 1. From the left menu tree, select . 2. Click . 3. Make your changes as necessary in details. For more information, refer to “REMOTE CONTROLLER”. (Page 26) 4. Click . Your changes will be saved. Recording Operation Setting 1. From the left menu tree, select . 2. Click . 3. Make your changes as necessary in details. For more information, refer to “RECORDING OPERATION”. (Page 45) 4. Click .
Instant Recording Setting 1. From the left menu tree, select . 2. Click . 3. Make your changes as necessary in details. For more information, refer to “INSTANT RECORDING”. (Page 48) 4. Click . Your changes will be saved. WEB VIEWER User Management Setting 1. From the left menu tree, select . 2. Click . 3. Make your changes as necessary in details. For more information, refer to “USER MANAGEMENT”. (Page 34) 4. Click . Your changes will be saved.
web viewer IP Setup Setting 1. From the left menu tree, select . 2. Click . 3. Check the network connection status and make your changes as necessary in details. For more information, refer to “IP SETUP”. (Page 36) 4. Click . Your changes will be saved. E-mail Setting 1. From the left menu tree, select . 2. Click . 3. Make your changes as necessary in details. For more information, refer to “E-MAIL”. (Page 38) 4. Click . Your changes will be saved.
Alarm output setting 1. From the left menu tree, select . 2. Click . 3. Make your changes as necessary in details. For more information, refer to “ALARM OUTPUT”. (Page 42) 4. Click . Your changes will be saved. WEB VIEWER Buzzer out setting 1. From the left menu tree, select . 2. Click . 3. Make your changes as necessary in details. For more information, refer to “BUZZER OUT”. (Page 42) 4. Click . Your changes will be saved.
web viewer USING THE iPhone 1. Select the Safari browser. 2. Enter the IP address or URL to connect. And touch the button. http:// set IP Address: Port No(Default 8080) Ex)http://f05bb96.websamsung.net:8080 3. Enter the User name and Password then user can see the Image. (Default ID: admin, PW: 4321) 4. Touch button to get the image. CH select Frame Rate Manual, Max, 2, 1, 0.5, 0.3, 0.1 In choosing Manual, it updates picture.
appendix PRODUCT SPECIFICATION Item General NTSC / PAL Remote Control Yes Input 4CH BNC Audio Live Alarm/Motion APPENDIX System Format Operation System Video Details Embedded Linux Output 1EA BNC 1 CH(CVBS) Input 4CH(1Vp-p) Output RCA Type : 1CH Display Mode 1/4/Sequence Input 4CH Output Relay : 1CH Pre Alarm 1sec~5sec Post Alarm Select between 5 sec to 180 sec Buzzer Yes Motion Detection 4CH Video Pop-up Support Video Codec H.264 (Base profile) Audio Codec G.
appendix Item Details Client PC SPEC • MS Explorer 5.
OPEN SOURCE LICENSE REPORT ON THE PRODUCT The software included in this product contains copyrighted software that is licensed under the GPL/LGPL. You may obtain the complete Corresponding Source code from us for a period of three years after our last shipment of this product by sending email to help.cctv@samsung.com If you want to obtain the complete Corresponding Source code in the physical medium such as CD-ROM, the cost of physically performing source distribution might be charged.
of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License.
How to Apply These Terms to Your New Programs GNU Lesser General Public License instead of this License. If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program.
install or run modified versions of the software inside them, although the manufacturer can do so. This is fundamentally incompatible with the aim of protecting users' freedom to change the software. The systematic pattern of such abuse occurs in the area of products for individuals to use, which is precisely where it is most unacceptable. Therefore, we have designed this version of the GPL to prohibit the practice for those products.
The Corresponding Source for a work in source code form is that same work. 2. Basic Permissions. All rights granted under this License are granted for the term of copyright on the Program, and are irrevocable provided the stated conditions are met. This License explicitly affirms your unlimited permission to run the unmodified Program. The output from running a covered work is covered by this License only if the output, given its content, constitutes a covered work.
offer spare parts or customer support for that product model, to give anyone who possesses the object code either (1) a copy of the Corresponding Source for all the software in the product that is covered by this License, on a durable physical medium customarily used for software interchange, for a price no more than your reasonable cost of physically performing this conveying of source, or (2) access to copy the Corresponding Source from a network server at no charge.
Notwithstanding any other provision of this License, for material you add to a covered work, you may (if authorized by the copyright holders of that material) supplement the terms of this License with terms: a) Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License; or b) Requiring preservation of specified reasonable legal notices or author attributions in that material or in the Appropriate Legal Notices displayed by works containing it; or c) Prohibiti
litigation (including a cross-claim or counterclaim in a lawsuit) alleging that any patent claim is infringed by making, using, selling, offering for sale, or importing the Program or any portion of it. 11. Patents. A “contributor” is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based. The work thus licensed is called the contributor's “contributor version”.
and conditions either of that numbered version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of the GNU General Public License, you may choose any version ever published by the Free Software Foundation.
To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified by someone else and passed on, the recipients should know that what they have is not the original version, so that the original author’s reputation will not be affected by problems that might be introduced by others. Finally, software patents pose a constant threat to the existence of any free program.
2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) The modified work must itself be a software library. b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change.
the work for the customer’s own use and reverse engineering for debugging such modifications. You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You must supply a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to the copy of this License.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances.
write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Also add information on how to contact you by electronic and paper mail. You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright disclaimer” for the library, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the library ‘Frob’ (a library for tweaking knobs) written by James Random Hacker.
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
4 Channel DVR User Manual Copyright ©2010 Samsung Techwin Co., Ltd. All rights reserved. Trademark is the registered logo of Samsung Techwin Co., Ltd. The name of this product is the registered trademark of Samsung Techwin Co., Ltd. Other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Samsung Techwin Co., Ltd shall reserve the copyright of this document.
SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Tol Free : +1-877-213-1222 FAX : +1-310-632-2195 www.samsungcctvusa.com www.samsungtechwin.com www.samsungsecurity.com www.samsungipolis.com SAMSUNG TECHWIN EUROPE LTD.
