manual de utilizador(Windows 7)

42_ troubleshooting
TROUBLESHOOTING FOR ERROR CODES
ERROR
CODE
CAUSE SOLUTION
• Vacuum cleaning Robot is caught,
stuck or trapped while navigating.
• Turn o the Power Switch at the bottom and
move the robotic vacuum cleaner to a dierent
location.
• A foreign substance (string, paper,
toy etc.) is caught in the power
brush.
• Turn o the Power Switch at the bottom and
remove the foreign substance from the power
brush.
• A foreign substance (string, paper,
toy etc.) is caught in the left driving
wheel.
• Turn o the Power Switch at the bottom and
remove the foreign substance from the left
driving wheel.
• A foreign substance (string, paper,
toy etc.) is caught in the right
driving wheel.
• Turn o the Power Switch at the bottom and
remove the foreign substance from the right
driving wheel.
• Check bumper sensor. • Slightly pull the stuck bumper outward.
• A foreign substance (dust, stain
etc.) is on the Obstacle sensor
window.
• Turn o the Power Switch at the bottom and
wipe the foreign substance from the front and
rear sensor windows using a soft cloth.
• A foreign substance (Dust, stain
etc.) is on the Cli sensor window.
• Turn o the Power Switch at the bottom and
wipe the foreign substance on the cil sensor
window with a soft cloth.
• A foreign substance (String,
cloth etc.) is caught on the edge-
cleaning side rotating brush.
• Turn o the Power Switch at the bottom and
wipe the foreign substance from the edge-
cleaning side rotating brush.
❈
If you press the Start/Stop button or turn o the Power Switch, the error code is cleared.