manual de utilizador(Windows 7)

40_ troubleshooting
CHECKLIST BEFORE SVC CALLS
Symptom Checklist Measure to Take
Vacuum cleaning
Robot does not
operate at all before
cleaning.
• Is the Power Switch turned on? • Turn on the Power Switch.
• Is cleaning mode (
) in the
display panel turned on?
• Press the (
) button. (To turn it
o, press and hold the (
) button
down for 3 seconds or longer.)
• Is the battery level flashing only
one level and is ‘LO’ displayed in
the display panel?
• Lift up the robotic vacuum cleaner,
and manually dock the robotic
vacuum onto the charger to charge
it.
• Robotic vacuum cleaner will not
operate when the battery in the
• remote control is depleted.
• Replace the batteries in the remote
control. (AAA type)
Vacuum cleaning
Robot stopped
operating while
cleaning.
• Is the battery level flashing only
one level and is ‘LO’ displayed in
the display panel?
• Lift up the robotic vacuum cleaner,
manually dock the robotic onto the
charger to charge it.
• Has the robotic vacuum cleaner
become hooked on wires on the
floor?
• Turn o the Power Switch and
remove the wires.
• Is the robotic vacuum cleaner
stuck to the floor where there is a
height dierence?
- The driving wheel is lifted.
• Turn o the Power Switch and
move the cleaning robotic vacuum
to another place to clean.
• Is there a thin towel (cloth)
wrapped around the driving wheel?
• Turn o the Power Switch and
remove the thin towel.
• Is the robotic vacuum cleaner
stuck on the doorsill?
• Turn o the Power Switch and
move the robotic vacuum cleaner
to another place to clean.
The suction power is
weak while cleaning.
• Check whether the Dust bin is full
of dust.
• Stop the robotic vacuum cleaner
and empty the Dust bin.
• Check whether the suction inlet is
clogged by foreign substances.
• Turn o the Power Switch and
remove the foreign substances on
the suction inlet.
• Check whether the Filter is
clogged.
• Clean the Filter well.
troubleshooting