manual de utilizador(Windows 7)

38_ maintain tools and ﬁlters

Cleaning the Edge-Cleaning Side rotating Brush

You must turn o the Power Switch at the bottom of the main

unit before cleaning the robotic vacuum.

1. Check whether the side rotating brush is bent or whether

there are any foreign substances stuck on the brush.

2. Wearing rubber gloves, wrap the side rotating brush with a

cloth using hot water for about 10 seconds and wipe it on

the cloth.

3. Turning the side rotating brush, repeat the procedures in

Step 2.

4. If hair or string is wrapped between the main unit and the

side rotating brush, undo the screw of the side rotating

brush using a (+) driver to remove it.

When reassembling the brush, check the “L” mark on the

edge-cleaning side rotating brush and the “L” mark on the

main unit and then reassemble the side rotating brush.

(Letter “R” is carved at the right side rotating brush.)

Because the side rotating brush easily attracts hair and other foreign substances, make sure to

clean it frequently.

Excessive foreign substances on the side rotating brush can damage the brush.

NOTE