manual de utilizador(Windows 7)

32_ operating the cleaner
Edge Cleaning
When the Obstacle Sensor detects an obstacle during the
cleaning, the Robotic vacuum Cleaner reduces its speed to
minimize the bumping impact and the Bumper Sensor also
helps it lower the bumping impact.
It cleans the corners by reaching to them as close as possible.
(This Robotic vacuum Cleaner is a touching type cleaner.)
The robotic vacuum cleaner will move by itself and
automatically clean the house until cleaning is completed
once.
■
If cleaning begins when the robotic vacuum cleaner is docked
with the charger station, the time to return to the charger is
decreased since the robotic vacuum cleaner remembers its
original position while moving.
■
If the battery level becomes too low while cleaning, the robotic
vacuum cleaner will automatically return to the charger station
and resume cleaning after charging its battery.
(Number of cleaning operations resumed: Once)
Main unit button
Remote control
button
Configuration
Sequence
▼
5 times (when the product is
not in the process of charging.)
3 times (when the product is
charging.)
1. Set the mode.
2. Cancel the mode.
About the Resume Cleaning function
• If the robotic vacuum cleaner has evaluated that
cleaning is complete, the resume cleaning function is not
performed.
• If you move the robotic vacuum cleaner when it is being
charged or press a button, the robotic vacuum cleaner
judges cleaning to be complete and does not resume
cleaning.
Do not move the robotic vacuum cleaner when it is cleaning
or press a button while it is cleaning. Otherwise, the robotic
vacuum cleaner judges cleaning to be complete and starts
cleaning again from the beginning.
NOTE
CAUTION
While cleaning
When cleaning is
complete