manual de utilizador(Windows 7)
operating the cleaner _27
03 OPERATING THE CLEANER
Recharging
You can have the robotic vacuum cleaner return to the charger
to charge the battery by using the Recharging button.
■
When the robotic vacuum cleaner is operating, press the
(
) button to cancel the operation and press the Recharging
button.
1. Press the Recharging button.
- The main unit icon (
) is turned on and the robotic vacuum
cleaner will return to the charger.
2. To stop the robotic vacuum cleaner while it is returning to
the charger, press the (
) button.
3. To test the auto charge function, press the Recharging
button when the robotic vacuum cleaner is less than 1.5m
from the charger.
Using the remote control
Troubleshooting when the robotic vacuum cleaner does not
return to the charger.
• Check the installation of the charger
- When the charger is in a location where the charger cannot
guide the robotic vacuum cleaner to the charger.
- When the charger is more than 5m away from robotic vacuum
cleaner.
: It may require a longer time for the robotic vacuum cleaner to
return to the charger.
• Manually charge the robotic vacuum cleaner in the following
cases.
- When the charger is installed in a corner.
- When the battery is fully discharged.
- When the robotic vacuum cleaner is trapped by an obstacle
(furniture etc.)
- When the robotic vacuum cleaner cannot pass over the doorsill
to the location where the charger is installed.
Using the main unit buttons
1.5m ahead