manual de utilizador(Windows 7)

operating the cleaner _25
03 OPERATING THE CLEANER
About the IrDA sensor.
• The infrared signal transmission may not be
smooth in locations exposed to halogen lamps
or in outdoor locations.
• Robotic vacuum cleaner uses 3 types of infrared
devices and a device may not work in front of
another device with a higher priority.
• When controlling the robotic vacuum cleaner
with the remote control, the robotic vacuum cleaner may cross the virtual fence of the
VIRTUAL GUARD or run against an obstacle, because the remote control signal has a higher
priority than the VIRTUAL GUARD signal.
• When using the robotic vacuum cleaner in a small location or at a close distance, it may
malfunction due to interference of the infrared signals.
• Install the VIRTUAL GUARD away from the charger as auto charging may be interrupted if the
VIRTUAL GUARD is near the charger.
• If more than one robotic vacuum is used simultaneously, they may malfunction due to
interference of the infrared signals.
Installing the air freshener
Please install the air freshener before using the robotic vacuum
cleaner. If the air freshener is installed, the robotic vacuum
cleaner will give o a pleasant fragrance.
1. Remove the plastic bag containing the air freshener.
2. Open the air freshener compartment cover at the top of the
Dust bin and put the air freshener in the compartment.
3. Close the air freshener compartment cover.
❈
To purchase the air freshener additionally, please contact the
Samsung Electronics service center.
Air freshener compartment
CAUTION
[Infrared Signal Priority]
Remote Control VIRTUAL
GUARD
Charger